It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
All of our accessories are easy to install and make owning a great brand of hot tub even sweeter. Just when we think our Hot Spring spa can’t get any better, the engineers at Watkins dream up another cool idea and bring it to fruition. Explore some of the add-ons we enjoy in our spas.
Showing 1–30 of 81 results
-
30 Second Ozone Detection Test Kit In just a few easy steps, the spa owner will know if the ozone generator is working If the ozone generator is producing sufficient levels of ozone, it will bleach the blue indicator material inside the glass tube to white ...read more
-
What's included: Hot Spring spa Ozonator (Freshwater III Corona Discharge Ozone System) w/ Direct Connect Power Cord, Injector, Ozone Resistant Tubing & Check Valve Specs: 120v, 60Hz This Hot Spring FreshWater® III Corona Discharge Ozonator ...read more
-
What's included: Compact Freshwater 3 High Output Ozone System w/ Direct Connect Power Cord, Injector, Ozone Resistant Tubing & Check Valve made for all 2006-forward Hot Spot & Solana spa models Description: FreshWater® III CD Ozonator ...read more
-
Sku: 74078
Injector, Freshwater Ozone, Black
The injector fits in-line after the Silentflo 5000 (discharge side and after the heater) This Kynar plastic "venturi" injector is ozone resistant and is used with the Freshwater III High Output Ozonator by Watkins manufacturing, item 72602 -
Sku: 74077
Injector, Freshwater Ozone, Red
This red ozone injector was used with the Freshwater I & Freshwater III (for Hot Spot & Solana spas) It is designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system The injector is matched to the ...read more -
Sku: 1044101-72228-AM-BYP
Tubing Kit, Del-Ozone-1/4in with Check valve
This 1/4" ID (3/8" OD) ozone-resistant tubing works with UO3 ozone generator It includes an attached 1/4" ozone-resistant check valve, clamps, mounting screws, and new flag terminals This assembly is approx five feet in length Note: There is a small ...read more -
Sku: 1044101-72228-BYP
Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar with Check valve
This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators It is the replacement for all Freshwater 3 ozonators It includes an attached 1/4" ozone-resistant check valve This assembly is approx six feet ...read more -
Sku: 37876
Uprite Cover Lifter (7in Clearance)
The Uprite® Lifter is a favorite for close clearance needs If your spa needs to be nudged up close to the house, fence or gazebo then this lifter is ideal The Uprite® (sometimes spelled upright) only requires seven inches (7") of rear clearance to ...read more -
Sku: 1044101
Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.
Over time an Ozonator check valve will breakdown under the harsh conditions of ozone Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber Rubber diaphragms last about a month before the rubber becomes hard -
Sku: 71794
Gas Spring-Uprite
The Uprite® Cover Lifter employs two gas shocks that assist in opening the spa cover Sometimes these gas shocks can fall victim to the elements (storms, crazy uncles, frat parties etc ) and need replacing Replacement time is approximately thirty seconds ...read more -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 75103
Gas Spring Lock-Uprite
The Gas Spring lock is used to secure the Uprite Lifter in the open position attaching to only one gas shock This part is typically left off when installing the Uprite Cover Lifter unless the spa is located in a windy area -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators and is also the current replacement tubing for all Freshwater III units Note: Tubing only
-
Sku: 36586
Clip, Extruded Air Valve
Used to hold the air intake for the Freshwater II Ozonator in place on the wall in the equipment compartment near the Ozonator Found in Hotspring and Tiger River Spas with Freshwater II Ozonators -
Spa Frog® @Ease® SmartChlor® replacement Cartridge for the FROG® @Ease In-Line System How long do the Mineral and SmartChlor® cartridges last The mineral cartridge lasts four months or whenever the hot tub is drained and refilled The SmartChlor® ...read more
-
@Ease® mineral cartridge for Spa Frog® for Hot Spot models beginning in 2019 How long do the Mineral and SmartChlor® cartridges last The mineral cartridge lasts four months or whenever the hot tub is drained and refilled The SmartChlor® Cartridge ...read more
-
Spa FROG® @Ease® Smart Chlorine Test Strips Replaces item 77908 In 2 seconds, you can know precisely whether your pH, Total Alkalinity and Hardness are balanced, plus whether or not SmartChlor® needs replacing Simply dip the FROG® @ease® Test Strip ...read more
-
What's Included: (1) Spa Frog @ease Mineral Cartridge, (1) Spa Frog @ease SmartChlor Cartridge, (30) Spa Frog @ease Test Strips & (1) Frog Jump Start The @ease® System combines the proven FROG® mineral formula for killing bacteria with SmartChlor® ...read more
-
Spa Frog Cartridge Holder (Spa Frog Assembly), used on select Hot Spot Spas The @ease® System combines the proven FROG® mineral formula for killing bacteria with SmartChlor® Technology that maintains a consistently low chlorine level for weeks Unlike ...read more
-
Sku: 72361
Fuse, Freshwater III, 1/2A 250V FAST-BLO
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Small size fuse used in the Freshwater 3 Ozonator unit -
Sku: 71360-BYP
Power Cord, Freshwater II & III Ozone Units
Every once in awhile rodents like to nibble on various power cords in the equipment compartment This 4' long cord set is the replacement for all Freshwater 2 and Freshwater 3 ozone units Note: This cord will need to be spliced onto the power cord of your ...read more -
Sku: 71793
Angle Bracket-Uprite
Angle bracket for Uprite cover lifter -
This restrictor is used in Utopia and Paradise spas only with the Spa FROG® @ease® In-line system
-
This ozone receptacle was introduced in 1995 on the Hot Spring and Tiger River control boxes They were eliminated in the beginning of 1997, only to be added back in the early second quarter of 1997 This receptacle is no longer needed with the new style of ...read more
-
Sku: 35196
Fuse, Freshwater II Ozonator
This is the fuse used to protect the Freshwater II Ozonator -
This part attaches onto the right side of the spa cover
-
Sku: 73451
Hardware Bag #1, Uprite Cover Lifter
Bag #1 for the upright cover lifter Contains the following: 2 x 1/4 x 20 5/8" Hex Bolts 2 x 1/4 x 1" Fender Washers 2 x 2 Hold Deck Hinge 10 x #10 Washers 8 x #10 1/2" Square Panhead Self Tapping Screws 10 x #10 1 1/2" Square Pan Tapping Screws 12 ...read more
Showing 1–30 of 81 results