quick ship ,as described and was perfect transaction. ThanksOn 06/13/2024 by B. H. (verified customer)
All of our accessories are easy to install and make owning a great brand of hot tub even sweeter. Just when we think our Hot Spring spa can’t get any better, the engineers at Watkins dream up another cool idea and bring it to fruition. Explore some of the add-ons we enjoy in our spas.
Showing 1–30 of 83 results
-
This Freshwater mineral spa sanitizer introduces silver ions into the spa water, inhibiting bacterial growth It is designed to suspend inside of the filter standpipe on Hot Spring spas beginning in 1990, Tiger River spas beginning in 1992, all Limelight spa ...read more
-
ON BACK ORDER - ETA MID JULY 2024 Newly designed, this gray pillow is the sole factory replacement for the 1998 to 2010 Tiger River Bengal, Caspian, Sumatran, and 1998-2004 Siberian spa models Also the replacement pillow for the obsoleted 72600 & 72599 ...read more
-
Sku: 70373
Pillow, Dark Gray, Tiger River
Factory replacement charcoal gray colored pillow for the 1992-1994 Tiger River Khyber, Manora and Tondi spa models See the backside of this headrest -
30 Second Ozone Detection Test Kit In just a few easy steps, the spa owner will know if the ozone generator is working If the ozone generator is producing sufficient levels of ozone, it will bleach the blue indicator material inside the glass tube to white ...read more
-
What's included: Hot Spring spa Ozonator (Freshwater III Corona Discharge Ozone System) w/ Direct Connect Power Cord, Injector, Ozone Resistant Tubing & Check Valve Specs: 120v, 60Hz This Hot Spring FreshWater® III Corona Discharge Ozonator ...read more
-
Sku: 74078
Injector, Freshwater Ozone, Black
The injector fits in-line after the Silentflo 5000 (discharge side and after the heater) This Kynar plastic "venturi" injector is ozone resistant and is used with the Freshwater III High Output Ozonator by Watkins manufacturing, item 72602 -
Sku: 1044101-72228-AM-BYP
Tubing Kit, Del-Ozone-1/4in with Check valve
This 1/4" ID (3/8" OD) ozone-resistant tubing works with UO3 ozone generator It includes an attached 1/4" ozone-resistant check valve, clamps, mounting screws, and new flag terminals This assembly is approx five feet in length Note: There is a small ...read more -
Sku: 1044101-72228-BYP
Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar with Check valve
This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators It is the replacement for all Freshwater 3 ozonators It includes an attached 1/4" ozone-resistant check valve This assembly is approx six feet ...read more -
Sku: 73019
Pillow Retainer Screw Kit
The plastic retainers in this kit come in two lengths: The short gray retainers are used if your pillows have remained in place over the years The gray extensions are used only if your pillows have fallen off often in the past -
Sku: 37876
Uprite Cover Lifter (7in Clearance)
The Uprite® Lifter is a favorite for close clearance needs If your spa needs to be nudged up close to the house, fence or gazebo then this lifter is ideal The Uprite® (sometimes spelled upright) only requires seven inches (7") of rear clearance to ...read more -
The CoverCradle® is our smoothest operator As the spa cover is folded back the “cradle” design is assisted by dual pneumatic gas shocks lowering it to a gentle rest It only needs twenty-four inches (24") of rear clearance
-
The CoverCradle® II has all the features of its big brother in a single pneumatic gas shock design Our customers who choose either of the CoverCradle® models don't have clearance issues and favor the lower resting point of the cover for increased ...read more
-
The Lift 'N Glide® is easy to install and ready to ship This lifter only requires fourteen inches (14") of rear clearance and three inches (3") on each side
-
Sku: 72573
Side Arm Assembly, Cover Cradle
This black side arm is used on the CoverCradle and the CoverCradle II It attaches to the side of the spa cover and then to the side of the spa -
Sku: 1044101
Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.
Over time an Ozonator check valve will breakdown under the harsh conditions of ozone Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber Rubber diaphragms last about a month before the rubber becomes hard -
Sku: 71515
Cover Lock Kit, 4 Sets, Black
Four sets of black cover locks This kit has both the female end (mounts onto the spa) and the male end (attaches to the cover strap) and the mounting screws All four of these sets come standard in this kit This coverlock kit replaces all other colors and ...read more -
Sku: 71794
Gas Spring-Uprite
The Uprite® Cover Lifter employs two gas shocks that assist in opening the spa cover Sometimes these gas shocks can fall victim to the elements (storms, crazy uncles, frat parties etc ) and need replacing Replacement time is approximately thirty seconds ...read more -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 72574
Hardware Bag #1, Cover Cradle
This Cover Cradle & Cover Cradle II hardware bag #1 includes the following: Four Hole Side Hinge (Qty 2) Four Hole Rear Hinge (Qty 2) #10 x 1" Flat Head Screws (Qty 8) #10 x 1-1/2" Flat Head Screws (Qty 8) Note: The items in this hardware bag are ...read more -
Sku: 70322
Key, Cover Lock (Set of 2)
These keys (set of two) lock & unlock the spa covers (latches) cover locks that are located on the end of the four straps The cover locks are lockable to help prevent or discourage unauthorized entry into the spa -
Sku: 76029-1
FreshWater Vanishing Act Calcium Remover Pillow
Reduce water hardness in an entirely new way with the Vanishing Act calcium remover Instead of adding chemicals to the water, this product removes calcium particles, leaving the water softer and silky on your skin Softer water reduces the need for ...read more -
Sku: 71095
Gas Shock, Cover Cradle
Replacement 40lb gas spring shock for all models of the Cover Cradle cover lifter Gas shock color is black -
Sku: 74034
Gas Shock, Cover Cradle II
Replacement 60lb gas spring shock for all Cover Cradle II cover lifters from the makers of Hot Springs spas The gas shock color is black One of these shocks is used on the Cover Cradle II -
Stainless steel screw used to secure the heater to the equipment compartment floor on Hot Spring & Tiger River spa models Also used on the SilentFlo 5000 Circulation pump and to hold the Ozonator to the wall of the equipment compartment
-
The best way to deliver easy-to-manage, longer-lasting hot tub water is to start with the cleanest water possible This can be achieved with the new FreshWater Clean Screen pre filter This one-of-a-kind pre-filter traps organic contaminants, metals (such as ...read more
-
Sku: 76028-BYP
MetalTrap Clean Screen Pre-Filter, 10,000 Gallons (Approx. 20 Hot Tub Uses), For Pool or Spa
METALTRAP™ is a unique, patent-pending, water filtration technology designed to selectively filter out stain-causing metals found in water Unfiltered water can damage finishes and equipment and cause discoloration and odors METALTRAP™ is ...read more -
Sku: 75103
Gas Spring Lock-Uprite
The Gas Spring lock is used to secure the Uprite Lifter in the open position attaching to only one gas shock This part is typically left off when installing the Uprite Cover Lifter unless the spa is located in a windy area -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
Sku: 30334
Screw, #4 X 1/2in Stainless Steel
Stainless steel screw used in various locations on Hot Spring, Tiger River, Solana, Hot Spot and Limelight spas
Showing 1–30 of 83 results