Great serviceOn 04/19/2024 by H. P. (verified customer)
All of our accessories are easy to install and make owning a great brand of hot tub even sweeter. Just when we think our Hot Spring spa can’t get any better, the engineers at Watkins dream up another cool idea and bring it to fruition. Explore some of the add-ons we enjoy in our spas.
Showing 1–30 of 43 results
-
Sku: 37876
Uprite Cover Lifter (7in Clearance)
The Uprite® Lifter is a favorite for close clearance needs If your spa needs to be nudged up close to the house, fence or gazebo then this lifter is ideal The Uprite® (sometimes spelled upright) only requires seven inches (7") of rear clearance to ...read more -
Sku: 71794
Gas Spring-Uprite
The Uprite® Cover Lifter employs two gas shocks that assist in opening the spa cover Sometimes these gas shocks can fall victim to the elements (storms, crazy uncles, frat parties etc ) and need replacing Replacement time is approximately thirty seconds ...read more -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 75103
Gas Spring Lock-Uprite
The Gas Spring lock is used to secure the Uprite Lifter in the open position attaching to only one gas shock This part is typically left off when installing the Uprite Cover Lifter unless the spa is located in a windy area -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
Sku: 71793
Angle Bracket-Uprite
Angle bracket for Uprite cover lifter -
This ozone receptacle was introduced in 1995 on the Hot Spring and Tiger River control boxes They were eliminated in the beginning of 1997, only to be added back in the early second quarter of 1997 This receptacle is no longer needed with the new style of ...read more
-
This part attaches onto the right side of the spa cover
-
Sku: 73451
Hardware Bag #1, Uprite Cover Lifter
Bag #1 for the upright cover lifter Contains the following: 2 x 1/4 x 20 5/8" Hex Bolts 2 x 1/4 x 1" Fender Washers 2 x 2 Hold Deck Hinge 10 x #10 Washers 8 x #10 1/2" Square Panhead Self Tapping Screws 10 x #10 1 1/2" Square Pan Tapping Screws 12 ...read more -
Right side bracket (as you are facing the spa folding the cover away from you) for the Uprite cover lifter
-
Sku: 71789
Upright Side Bracket Assembly, Left Side
Left side bracket (as you are facing the spa folding the cover away from you) of the Uprite cover lifter -
Sku: 75152
Upright Extension Tube
One pair (quantity of two) of extensions for the Uprite cover lifter -
Sku: 75150
Uprite Channel Pivot Assembly, Left Side
This part attaches onto the left side of the spa cover -
Sku: 74080
SpAudio II Sony Stereo Interface Cable
This cable allows the IQ2020 control box to communicate with the Sony Marine Stereo used in the Spaudio II Without this cable, the spas remote control or topside control cannot be used to operate the Sony Stereo -
Sku: 73928
SpAudio II Sony System
Sony replacement unit for the SpAudio II sound system -
Sku: 73731
SpAudio II Antena
This is the antenna used on the Spaudio II sound system This antenna allows for the radio to receive FM stations The antenna basically just lays down inside the equipment area but an extension can be added to place the antenna outside of the spa for ...read more -
Sku: 72853
SpAudio Hardware Bag
Hardware for Spaudio -
Sku: 71744
Washer, Gliderite
These washers are used with the ¼” – 20 x 5/8” Hex Head Bolts & ¼” – 20 x 1” Hex Head Bolt on the Gliderite and also used on the Uprite cover lifter -
Sku: 78164
Upright Lifter and Pro Lifter Spacer
This spacer is used on Upright cover lifters for HSS (Hot Springs Spas) and Pro Lifter Caldera For 2018 and newer Limelight models – spacer kit PN 78164 is required to install an UpRite lifter (PN 37876) to create space needed due to the small corner ...read more -
Sku: 74043
SpAudio II Hardware
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This is the hardware kit for adding extra inputs to the Spaudio II sound system -
Sku: 74041
Corner Housing, SpAudio II
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This housing is inserted into the corner of the Hot Spring cabinet to house the Sony stereo unit This ...read more -
Sku: 74039
Amplifier, Digital, Spaudio I and II
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com -
Sku: 73999
SpAudio II Sound System
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com -
Sku: 73476
Transducer Assembly, Spaudio I & II
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The obsolete transducer is mounted into a tunnel located on each side of various Hot Spring spa models ...read more -
Obsolete: Factory replacement suggestion item - complete Uprite Lifter 37876
-
Sku: 72862
Aux Panel, 2003 Grandee and Vanguard with Spaudio Control
This item is obsolete and replaced by:
71904Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This auxiliary control panel was used on 2003 Vanguard & Grandee equipped with the Spaudio Sound ...read more -
Sku: 72741
Power Splitter, Spaudio
The splitter plugs into the IQ 2020 and provides power to the SpAudio Amp while still leaving power to supply the Freshwater III High Output Ozonator -
Sku: 72739
Rca Cable, Spaudio I
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Adapter cable that connects the cd player or mp3 player to the SpaAudio system -
Sku: 72738
Cd Housing, Spaudio I
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This part is designed to house a CD or MP3 player It simply pushes onto the RCA Cover on the outside of ...read more -
Sku: 72737
Transducer Cordset, Spaudio I & II
Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice Wiring harness set up for the Spaudio 1 and 2 transducers Includes one harness to connect one ...read more
Showing 1–30 of 43 results