Good company. Honest. ThanksOn 06/03/2024 by D. S. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Showing 1–30 of 36 results
-
Sku: 303550
Harness, LED Light
This LED light harness is used with item 303307 multicolored light and is apart of the retrofit replacement parts that include: 78448 Control Box 72093 Control Panel 77358 Heater 78451 Bracket 303307 LED Multi-Color Lightcross compatible with older ...read more -
Sku: 1306501
Power jumper, 2 pin, 15mm, Hawk
This 2 pin jumper is used in the Cedric Control box (73859) as well as the Hawk control box (76840) for Hot Spot tubs -
Sku: 39192-X2-BYP
Power Jumper, Heater Relay Board, 2-pin
2-pin metal jumper is one of two different jumpers that are used on all years of the IQ 2020 Heater Relay Board -
Sku: 39193-X2-BYP
Power Jumpers, Heater Relay Board, 3-Pin (pkg of 2)
Package of two 3-pin metal jumpers is one of two different jumpers that are used on the original 73355 Heater Relay Board On the new style Heater Relay Board there are two of these 3 pin jumpers The jumpers are inserted flat on the top edge of the heater ...read more -
Sku: 39193
Power Jumper, Heater Relay Board, 3-Pin
The 3-pin metal jumper is one of two different jumpers that are used on the original 73355 Heater Relay Board On the new style heater relay board, there are two of these 3 pin jumpers The jumpers are inserted flat just above the gray terminal block numbered ...read more -
Sku: 39192
Power Jumper, Heater Relay Board, 2-Pin
This 2-pin metal jumper is one of two different jumpers that are used on all years of the IQ 2020 Heater Relay Board The 3-pin jumper is also used depending on the spa model and whether it's wired 120v or 240v -
Sku: 1178301-11
Power Supply, Points of Light LED’s, Limelight
This is the power supply (low voltage-5v) for the small LED lights (aka Points of Light, Raio) found on Limelight Spas -
Sku: 35628
Surge Protector, Relay Connection
Relay surge protector (aka transient suppressor) used on all 1990-1993 Hot Spring spa models and on the third quarter 1995 220volt Hot Spring models This is one of two types of surge protectors used in the Hot Spring brand The second style is 31458 -
This sensor fitting is installed through the side spa shell at the base of the hot tub near the suction and drain fittings on Hot Spot models beginning in 2020 Its purpose is to provide a watertight seal around the 72493 temperature control thermistor bulb
-
Sku: 76112
Thermistor Sensor Fitting, Hot Spot
This sensor fitting is installed through the side of the filter housing in all 1998-2005 Hot Spot brand spas Its purpose is to provide a watertight seal around the 71578 thermistor bulb -
Sku: 37727
Thermosensor Fitting, Solana
This thermo-sensor fitting is used to waterproof the temperature sensor (thermistor) that is located in the filter compartment of all Solana TX, RX and SX models -
Sku: 71377
Power Jumper, Terminal Block, IQ 2000
Jumpers used on the IQ 2000 control box terminal block for 120-volt operation or converting from 120 volt to 230 volt -
Sku: 71377-x3-BYP
Power Jumper, Terminal Block, IQ 2000
Kit of three jumpers used for configuring the voltage on the IQ2000 control system used from 1997 to 2000 on Hot Springs and Tiger River spa The configuration of the jumpers allows for conversion between 120 volt and 230 volt operation -
Used on the 1995-1997 Hot Spot spas this fitting provided a flange for the cartridge-style heater element to seal against and a "dry-well" for the thermistor probe to slide into
-
This is the power supply for the Eagle control box IQ 2020 spa control system for Rev D or newer
-
This wiring harness connects the electronic thermostat to the PWA Board on the backside of the 1995-1996 Tiger River Control Panel If there is a communication problem with this wiring harness there will be erratic heating issues in a 1995-1996 Tiger River ...read more
-
Cable connector assembly for Khyber
-
This is the power supply for the Hawk control box for Rev E or newer
-
Sku: 32452
Harness, Pcb 4T 115V 5Kw
Wiring harness for a 10-minute timer circuit board used on all models 1991 to 1993 Hot Springs spas The timer board is part number 71346 and is currently unavailable -
Sku: 71853
Cable Retrofit Kit, Hot Spring
The cable retrofit kit is used on the third through fourth quarter 1996 Hot Spring Landmark and Summit spas when upgrading from the original discontinued control box with the newer 1997 IQ2000 control box This cable is only necessary if the flow switch is ...read more -
Sku: 71741
Hotspot Power Cord
Hot Spot power cord -
Sku: 71280
Thermowell, Hot Spot Square
Thermowell houses the temperature sensor for Hot Spot Square -
Sku: 70899
Thermowell Assembly
Thermowell houses the thermistor probe on a 1995-1997 Hot Spot spa models -
This wiring harness is used to connect the thermostat to the circuit board on the topside control panel on Tiger River spas made between 1992 and 1994
-
Sku: 33421
Comm Cord, Tiger River Pre-1995
This communication cord looks like a Cat5 cable It communicates to the main control box circuit board (70374 or 70375) from the control panels PCB board in the 1992-1994 Tiger River Khyber, Manora & Tondi spa models -
Thermowell housing for the t-stat temperature probe to insert into This thermowell aka "drywell" keeps the copper t-stat probe away from the chlorinated water so it doesn't dissolve
-
Cool gray temperature sensor fitting
-
Obsolete by factory: no replacement Surge protector used in '94-'96 Hot Spring, '92-'94 Tiger River on the GFCI and in all '93-'97 Hot Spot spa models This is one of two types of surge protectors used in Hot Spring, Tiger River, & Hot Spot brands The ...read more
-
Sku: 72962
Cord Assembly, After Market
Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice This is a generic cord that can be used for connecting low amperage components such as the ...read more -
Sku: 32445
Harness, Pcb 4T 230V 5Kw
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com
Showing 1–30 of 36 results