CONTROL BOXES

These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.

Electrical: Dimmer Switch, Led Harness, Led Light, O Ring, Plug, Power Jumper, Relay Switch, Resistor Jumper, Surge Protector

Showing all 25 results

  • Gecko IN.YJ 3 Series Complete System, 1999-2005 Hot Spot and Solana After-Market Retrofit
    The Gecko IN YJ 3 Series complete system is the retrofit used on: Hot Spot 1999-2000 SE (Y); 1999-2002 RE (Z), RLX (Z/ZQ), SLX (Y/YQ); 2001-2002 SLXtra (W/WQ); 2003-2005 Sorrento (SOR/SORS), Tobago (TOB), Trinidad (TRI); 2010-2012 Dash (DAS) Solana ...read more
    $760.58
    Add to cart
  • Harness, LED Light
    This LED light harness is used with item 303307 multicolored light and is apart of the retrofit replacement parts that include: 78448 Control Box 72093 Control Panel 77358 Heater 78451 Bracket 303307 LED Multi-Color Lightcross compatible with older ...read more
    $17.03
    Add to cart
  • LED Light, Multicolor, Hot Spot and Solana
    This multicolor LED light is used with 78448 control box and is apart of the retrofit replacements parts listed below: 78448 Control Box 72093 Control Panel 77358 Heater 78451 Bracket 303307 LED Multi-Color Lightcross compatible with older control ...read more
    $43.40
    Add to cart
  • Pressure Switch Bypass Jumper, IQ 2020 Spa Control System
    This jumper is used to bypass the pressure switch on the 2002-forward IQ 2020 spa control system The PDR Titanium Replacement Heater has its own automatic cut-off in the event of a low flow condition thus negating the need for a pressure switch After ...read more
    $29.30
    Add to cart
  • O-Ring, Control Thermistor
    Control Thermostat Thermistor o-ring for the 79006 and 78970 thermistors This o-ring is located on the "inlet" side of the heater and is the larger of the two thermistor o-rings For the outlet side of the heater see the part# 34879 o-ring
    $1.74
    Add to cart
  • O-Ring, Hi-Limit Thermistor
    High-Limit Thermistor o-ring for the 79005 and 78969 thermistors This o-ring is located on the "outlet" side of the heater and is the smaller of the two thermistor o-rings For the "inlet" side of the heater see part 34878
    $1.63
    Add to cart
  • Power jumper, 2 pin, 15mm, Hawk
    This 2 pin jumper is used in the Cedric Control box (73859) as well as the Hawk control box (76840) for Hot Spot tubs
    $3.78
    Add to cart
  • Power Jumper, Heater Relay Board, 2-pin
    2-pin metal jumper is one of two different jumpers that are used on all years of the IQ 2020 Heater Relay Board
    $7.37
    Add to cart
  • Power Jumpers, Heater Relay Board, 3-Pin (pkg of 2)
    Package of two 3-pin metal jumpers is one of two different jumpers that are used on the original 73355 Heater Relay Board On the new style Heater Relay Board there are two of these 3 pin jumpers The jumpers are inserted flat on the top edge of the heater ...read more
    $7.37
    Add to cart
  • Power Jumper, Heater Relay Board, 3-Pin
    The 3-pin metal jumper is one of two different jumpers that are used on the original 73355 Heater Relay Board On the new style heater relay board, there are two of these 3 pin jumpers The jumpers are inserted flat just above the gray terminal block numbered ...read more
    $3.78
    Add to cart
  • Power Jumper, Heater Relay Board, 2-Pin
    This 2-pin metal jumper is one of two different jumpers that are used on all years of the IQ 2020 Heater Relay Board The 3-pin jumper is also used depending on the spa model and whether it's wired 120v or 240v
    $3.78
    Add to cart
  • Plug, Hole, 0.50
    This plug is used to fill openings found on the back of the IQ2000 and IQ2020 Control box that can be used to allow wiring to enter the control box These plugs cover the openings that are not in use to help prevent dust, dirt, and insects from entering the ...read more
    $1.28
    Add to cart
  • Surge Protector, Relay Connection
    Relay surge protector (aka transient suppressor) used on all 1990-1993 Hot Spring spa models and on the third quarter 1995 220volt Hot Spring models This is one of two types of surge protectors used in the Hot Spring brand The second style is 31458
    $11.50
    Add to cart
  • Control Box Plug, for 0.875 Hole
    Black plastic plug used on the IQ 2000 and IQ 2020 Control Boxes to seal off an unused port helping to prevent bugs, dirt and debris from making a home inside the control box
    $1.28
    Add to cart
  • Power Jumper, Terminal Block, IQ 2000
    Jumpers used on the IQ 2000 control box terminal block for 120-volt operation or converting from 120 volt to 230 volt
    $7.63
    Add to cart
  • Power Jumper, Terminal Block, IQ 2000
    Kit of three jumpers used for configuring the voltage on the IQ2000 control system used from 1997 to 2000 on Hot Springs and Tiger River spa The configuration of the jumpers allows for conversion between 120 volt and 230 volt operation
    $22.13
    Add to cart
  • Pwa Relay Switch Input 12Volt DC-Hot Spot
    This 12Volt DC PWA Switch Relay controls the low-speed pump when the thermostat calls for heat on the 1995-1997 Hot Spot Z (round) and Y (rectangle shape) spa models   Note: There should be 10v -19v DC between the two red wires coming from the thermostat in ...read more
    $25.71
    Add to cart
  • Resistor/Jumper Upgrade for Hot Spot Z (Round)
    This upgrade kit is needed for the Hot Spot Z (round) model prior to Z-240133 (2nd quarter 1994) and comes with instructions for replacement From Z-330001 to Z-240133
    $70.63
    Add to cart
  • O-Ring, T-Stat Adapter, Tiger River
    This o-ring is used on the t-stat adapter where the knob for adjusting the thermostat attaches to Tiger River control panels from 1992 to 1997   The stem from the thermostat sticks into this adapter and the knob on the control panel sits on the adapter
    $8.25
    Add to cart
  • Control Box Plug, 1.093 Diameter
    Plastic plug used to seal the largest unused round holes in the bottom of the IQ 2020 Control Box on all 2012 5 Hot Spring and Limelight spas These plugs keep critters from crawling into the control box
    $3.62
    Add to cart
  • Dimmer Switch, Hot Spring
    This 115volt dimmer switch is used in all 1990-1996 Hot Spring spas This is one of two types of dimmers used in Hot Spring spa models The second choice is the 30189 used in all pre-1990 Hot Springs Note: Do not use a floodlight larger than 100 watts ...read more
  • Surge Protector, Hot Spring, Hot Spot, Tiger River
    Obsolete by factory: no replacement Surge protector used in '94-'96 Hot Spring, '92-'94 Tiger River on the GFCI and in all '93-'97 Hot Spot spa models This is one of two types of surge protectors used in Hot Spring, Tiger River, & Hot Spot brands The ...read more
  • Resistor, Hot Spot
    Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice This resistor was only used on the 1993-1994 Hot Spot Z (round) model spa Most Watkins Techs ...read more
  • Rubber Plug #11
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com
  • Rubber Plug # 2, 9545K14
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com

Showing all 25 results