I’ve used Backyard plus many times and they are incredibly friendly and helpful. Shoutout to Craig!On 03/21/2024 by N. C. (verified customer)
Brand: Hot Spring, Spaudio System, Tiger River
Showing 61–90 of 148 results
-
This label is used on all 1992-1996 Tiger River topside control panels This can be used as a replacement if the label on the topside is marred or peels off Simply peel off the old label after removing the thermostat knob and jet push buttons, and stick ...read more -
Sku: 35101Temperature Dial, Tiger River
This gray-colored temperature (thermostat dial) dial is found on all 1993-1997 Tiger River spa top-side control panels -
Sku: 35099Adapter, T-Stat Knob
This adapter was used from 1992 to 1997 on all Tiger River topside control panels The adapter accepts the decorative knob that is turned to adjust the temperature and connects to the actual thermostat, which adjusts the thermostat when the knob is turned -
Sku: 35087Standoff, Control Panel 1995-1997
This standoff is used to position the control panel circuit board apart from each other on all 1995-1997 Tiger River spa models -
Sku: 34412Control Panel Light Knob, White
This knob is a replacement for the light dimmer knob used on the Hotsprings Classic spa with the white version of the control panel, built from 1994 to 1997 Knob attaches to the standoff on the dimmer to adjust the brightness of the spa light -
Phillip head stainless steel screw, 8-18 x 3/8in for control panels on Hot Spring models 1994-1997 -
Sku: 34301Lens, Cleanup Cycle Light
Clear round lens inserts into the front control panel on all 1994-1997 Hot Spring spa models It is illuminated by the red L E D light behind it -
Sku: 33863Clamp, Control Panel, Tiger River
This clamp attaches to the back side of the 1992-1997 Tiger River topside control with a screw, and when tightened, holds the topside down to the shell of the spa An o-ring is used between the topside and the shell, which is compressed by the clamp pulling ...read more -
Sku: 33859Bezel, Control Panel, Tiger River
This bezel serves two purposes Used on all Tiger River Models from 1992 - 1997, it finishes off the edge around the jets and lights buttons on the control panel for aesthetics, as well as secures the button in place to prevent the button from popping out ...read more -
Sku: 33421Comm Cord, Tiger River Pre-1995
This communication cord looks like a Cat5 cable It communicates to the main control box circuit board (70374 or 70375) from the control panels PCB board in the 1992-1994 Tiger River Khyber, Manora & Tondi spa models -
Sku: 33368Screw, 10-32 x 3/8in
This screw is used on Hotsprings Spas made from 1994 to 1996 to hold the plastic stand-off in place on the mounting plate from behind This stand-off accepts the screws from the front of the control panel that are used to hold the control panel in place -
Sku: 33275O-Ring, Control Panel .07 X .07
These o-rings used on 1992 to 1997 Tiger River control panels, fit around the posts on which the buttons for the jets and lights glide up and down The o-rings serve as pads to soften the stop of the button when it is pushed all the way down -
Sku: 33138Spring, Control Panel 1/8in X 1-1/4in
Spring used on the button on Tiger River Control Panels from 1992-1994 This spring resides behind the button to help the button rebound after being pressed to activate the jets or lights -
Sku: 33132Push on Retainer, .094
Push on retainer, 094 -
Sku: 32425Switch, Toggle
This toggle switch was used on the 1991-1993 Grandee to turn off the "Timed Jets" feature an also used on the 115 volt Hot Spring and Tiger River spa models to activate the "Summer Mode" (aka Summer Timer) -
Knob spring, for the rear side of the control panel, found on Hot Spring models from 1994-1997 -
Sku: 30369Screw, #6 X 5/8in Stainless Steel
Stainless steel screw, #6 x 5/8in, for the control panel on Hot Spring Models from 1989-1993 -
Sku: 30361Screw, Metal #10 X 3/4in
Metal screw, #10 x 3/4in, found on the control panel of Hot Spring models from 1989-1993 -
Sku: 30360Screw, 10 X 1/2in Stainless Steel
This screw used to mount bracket for Navigator Remote Control -
This screw is used to hold in place the standoffs (35087) that secure the thermostat board (71340)to the topside control panel in Tiger River spas made from 1995 to 1997 -
Sku: 300859Nut, 2.5mm
This nut is used to secure the circuit board to the back of the control panel bezel on Tiger River spas from 1992-1997 It replaces a small spring clamp that used to do the same job The posts that the nut screws on to are actually plastic and are not ...read more -
Sku: 33570Washer, #10 .200 X .359 X .063
Washer, #10 200 X 359 X 063 -
Two of these screws are used to hold the thermostat in place to the circuit board on the topside control panel for Tiger River spas from 1992 to 1994 -
This retainer ring is used to hold the thermostat knob in place on the Tiger River topside control panel -
Sku: 34009Screw, Control Panel, Tiger River
This screw is used to mount Tiger River control panels to the shell of the spa on the bar top It secures a flip-out tab that clamps the control panel to the shell from the backside of the shell It was used on all models from 1992-1997 -
Mounting plate found on the backside of all 1994-1997 Hot Spring Classic spas control panels -
Sku: 34322Control Panel Lock O-ring
Control panel lock o-ring, found on Hot Spring Models from 1994-1997 -
Sku: 34359Screw, #8-16 X 1/2in
Screw, #8-16 X 1/2in, found on control panels on Hot SPring models from 1994-1997 -
(Package of 5) The standoffs are plastic pins used to mount this circuit board onto the inside of the control box This keeps the backside of circuit boards from touching the metal case of the control box in all 1990-1993 Hot Spring spa models -
Sku: 71811Interlock Switch Bypass Kit
Interlock switch bypass kit
Showing 61–90 of 148 results