I have always found the Backyard Plus sales representatives to be knowledgeable and helpful. The prices are great. This is my go to place for my hot tub.On 05/29/2024 by D. F. (verified customer)
Get high-quality Hot Spring Spa Wood Siding Panels, Equipment Compartment Doors, Wooden Slats, Cover Lifters, Cover Locks, Crack Repair Kits, and other related parts for your spa exterior.
Showing 1–30 of 283 results
-
Sku: 37876
Uprite Cover Lifter (7in Clearance)
The Uprite® Lifter is a favorite for close clearance needs If your spa needs to be nudged up close to the house, fence or gazebo then this lifter is ideal The Uprite® (sometimes spelled upright) only requires seven inches (7") of rear clearance to ...read more -
The CoverCradle® is our smoothest operator As the spa cover is folded back the “cradle” design is assisted by dual pneumatic gas shocks lowering it to a gentle rest It only needs twenty-four inches (24") of rear clearance
-
The CoverCradle® II has all the features of its big brother in a single pneumatic gas shock design Our customers who choose either of the CoverCradle® models don't have clearance issues and favor the lower resting point of the cover for increased ...read more
-
The Lift 'N Glide® is easy to install and ready to ship This lifter only requires fourteen inches (14") of rear clearance and three inches (3") on each side
-
Sku: 72573
Side Arm Assembly, Cover Cradle
This black side arm is used on the CoverCradle and the CoverCradle II It attaches to the side of the spa cover and then to the side of the spa -
Sku: 71515
Cover Lock Kit, 4 Sets, Black
Four sets of black cover locks This kit has both the female end (mounts onto the spa) and the male end (attaches to the cover strap) and the mounting screws All four of these sets come standard in this kit This coverlock kit replaces all other colors and ...read more -
Sku: 71794
Gas Spring-Uprite
The Uprite® Cover Lifter employs two gas shocks that assist in opening the spa cover Sometimes these gas shocks can fall victim to the elements (storms, crazy uncles, frat parties etc ) and need replacing Replacement time is approximately thirty seconds ...read more -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 73335
Espresso Slat, Flat
This is a single width slat in synthetic espresso material for use on Hot Springs and Hot Spot models Check your serial number in the Parts Finder above to be sure this part is for your spa -
Sku: 72574
Hardware Bag #1, Cover Cradle
This Cover Cradle & Cover Cradle II hardware bag #1 includes the following: Four Hole Side Hinge (Qty 2) Four Hole Rear Hinge (Qty 2) #10 x 1" Flat Head Screws (Qty 8) #10 x 1-1/2" Flat Head Screws (Qty 8) Note: The items in this hardware bag are ...read more -
Sku: 70322
Key, Cover Lock (Set of 2)
These keys (set of two) lock & unlock the spa covers (latches) cover locks that are located on the end of the four straps The cover locks are lockable to help prevent or discourage unauthorized entry into the spa -
Slat, Flat, Wenge, Synthetic Redwood Color Hot Spring Models 2006-2015 This slat makes up the majority of the Side and Back Panels, including the Door PLEASE NOTE: Normal length of slat is 32 75”; however, only the 30 38” length is available ...read more
-
Sku: 71095
Gas Shock, Cover Cradle
Replacement 40lb gas spring shock for all models of the Cover Cradle cover lifter Gas shock color is black -
Sku: 300040
Brass Door Screw Insert, 1/4in
This brass insert is used on the door frames of various spa models to provide attach a door using a stainless steel screw which screws into this insert -
Sku: 74034
Gas Shock, Cover Cradle II
Replacement 60lb gas spring shock for all Cover Cradle II cover lifters from the makers of Hot Springs spas The gas shock color is black One of these shocks is used on the Cover Cradle II -
Sku: 75103
Gas Spring Lock-Uprite
The Gas Spring lock is used to secure the Uprite Lifter in the open position attaching to only one gas shock This part is typically left off when installing the Uprite Cover Lifter unless the spa is located in a windy area -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
Sku: 30334
Screw, #4 X 1/2in Stainless Steel
Stainless steel screw used in various locations on Hot Spring, Tiger River, Solana, Hot Spot and Limelight spas -
This is a synthetic coastal grey slat in the wenge style used on Hot Springs spas
-
40" long replacement unstained redwood slat found on the 1992-1996 Tiger River 1992-1996 Khyber, Manora and rectangle Tondi spa models also used on 1997-2000 Siberian, Bengal & Sumatran models Location: Everywhere but the corners of the ...read more$37.51 Select Options
-
Sku: 72775-x1-BYP
Intake Vent Screen
This aluminum perforated strip mounts at the bottom of the equipment access door to keep rodents from making their home in the warmth of your Hot Spring or Tiger River spas equipment compartment This screen is cut to length Not available for the Hot Spring ...read more -
This stainless steel screw secures both male and female door fasteners Used on all 1995-2009 Hot Spring spa models Price reflects a quantity of one Also used on the Hot Spring & Tiger River pre-1994 water diverter valve kit
-
This Surewood slat is redwood colored It is used on the sides, back, front and doors of the Tiger River 2001-2004 Siberian, 2001-2010 Bengal, Sumatran, and Caspian spa models Measurements: 31-3/8" x 2-3/4"
-
Flat end slat, tongue and groove, in espresso for the Aria, Grandee and several of the Hot Spot models
-
3-1/4"wide x 32" long replacement unstained redwood slat found on the 1992-1996 Tiger River 1992-1996 Khyber, Manora and rectangle Tondi spa models Also used on 1997-2000 Siberian, Bengal & Sumatran models Location: Corners of skirting Length: ...read more
-
1-1/8" wide 32" long replacement unstained redwood slat found on the 1992-1996 Tiger River 1992-1996 Khyber, Manora and rectangle Tondi spa models also used on 1997-2000 Siberian, Bengal & Sumatran models Commonly used on each side of the equipment door ...read more
-
This Surewood slat is redwood colored It is used on the corners of the Tiger River 2001-2004 Siberian, 2001-2005 Bengal, Sumatran, and Caspian spa models Two on each corner Note: 32" X 4-1/2"
-
Sku: 76549
Fibercore Replacement Kit
This Fibercor Replacement Kit can be used on all Hot Spring Spa models from 2007 to 2018 and all 2019 Limelight and Hot Spot Spa models This Kit contains approximately 8 pounds of material, which is about 4 cubic feet -
Sku: 72714
Hardware Bag #2, Cover Cradle II
This Cover Cradle II hardware bag #2 includes the following: 1/4"-20 x 3/4" Stainless Steel Hex Bolts (Qty 4) #10 x 1-1/2" Stainless Steel Flat Head Screws (Qty 8) #10 x 1-1/2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware ...read more -
This Surewood slat is redwood colored It is the most commonly used slat on the sides, back, front and doors of the Tiger River 2001-2004 Siberian, 2001-current Bengal, Sumatran and Caspian spa models Length: 47" Width: 6-1/2"$67.16 Select Options
Showing 1–30 of 283 results