great company to work with, from tech support to delivery of my parts ( A+)On 05/01/2024 by M. K. (verified customer)
Get high-quality Hot Spring Spa Wood Siding Panels, Equipment Compartment Doors, Wooden Slats, Cover Lifters, Cover Locks, Crack Repair Kits, and other related parts for your spa exterior.
Showing 1–30 of 43 results
-
Sku: 37876
Uprite Cover Lifter (7in Clearance)
The Uprite® Lifter is a favorite for close clearance needs If your spa needs to be nudged up close to the house, fence or gazebo then this lifter is ideal The Uprite® (sometimes spelled upright) only requires seven inches (7") of rear clearance to ...read more -
Sku: 72573
Side Arm Assembly, Cover Cradle
This black side arm is used on the CoverCradle and the CoverCradle II It attaches to the side of the spa cover and then to the side of the spa -
Sku: 71794
Gas Spring-Uprite
The Uprite® Cover Lifter employs two gas shocks that assist in opening the spa cover Sometimes these gas shocks can fall victim to the elements (storms, crazy uncles, frat parties etc ) and need replacing Replacement time is approximately thirty seconds ...read more -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 304564
Brass Door Screw Insert, #10-24x.50″
This brass insert is used on the door frames of various spa models to provide attach a door using a stainless steel screw (304575-1) which screws into this insert -
Sku: 75103
Gas Spring Lock-Uprite
The Gas Spring lock is used to secure the Uprite Lifter in the open position attaching to only one gas shock This part is typically left off when installing the Uprite Cover Lifter unless the spa is located in a windy area -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
Sku: 71793
Angle Bracket-Uprite
Angle bracket for Uprite cover lifter -
This part attaches onto the right side of the spa cover
-
Sku: 73451
Hardware Bag #1, Uprite Cover Lifter
Bag #1 for the upright cover lifter Contains the following: 2 x 1/4 x 20 5/8" Hex Bolts 2 x 1/4 x 1" Fender Washers 2 x 2 Hold Deck Hinge 10 x #10 Washers 8 x #10 1/2" Square Panhead Self Tapping Screws 10 x #10 1 1/2" Square Pan Tapping Screws 12 ...read more -
Right side bracket (as you are facing the spa folding the cover away from you) for the Uprite cover lifter
-
Sku: 71789
Upright Side Bracket Assembly, Left Side
Left side bracket (as you are facing the spa folding the cover away from you) of the Uprite cover lifter -
Sku: 75152
Upright Extension Tube
One pair (quantity of two) of extensions for the Uprite cover lifter -
Sku: 75150
Uprite Channel Pivot Assembly, Left Side
This part attaches onto the left side of the spa cover -
Sku: 71744
Washer, Gliderite
These washers are used with the ¼” – 20 x 5/8” Hex Head Bolts & ¼” – 20 x 1” Hex Head Bolt on the Gliderite and also used on the Uprite cover lifter -
Back corner panel steel color for Hot Spot Propel, Pace and SX models beginning in 2020
-
Back corner panel steel color for Hot Spot Relay and Rhythm models beginning in 2020
-
Back corner panel steel color for Hot Stride and TX models beginning in 2020
-
Front corner panel steel color for Hot Spot Propel, Pace and SX models beginning in 2020
-
Front corner panel steel color for Hot Spot Relay and Rhythm models beginning in 2020
-
Front corner panel steel color for Hot Spot Stide (STD) models beginning in 2020
-
Sku: 78942
Front Corner Panel, Steel, Hot Spot TX
Front corner panel steel color for Hot Spot TX models beginning in 2020 -
This "Z" slat sits between the door panel and corner panel and is where the door panel screws are mounted
-
This "Z" slat sits between the door panel and corner panel and is where the door panel screws are mounted
-
This "Z" slat sits between the door panel and corner panel and is where the door panel screws are mounted
-
Sku: 78164
Upright Lifter and Pro Lifter Spacer
This spacer is used on Upright cover lifters for HSS (Hot Springs Spas) and Pro Lifter Caldera For 2018 and newer Limelight models – spacer kit PN 78164 is required to install an UpRite lifter (PN 37876) to create space needed due to the small corner ...read more -
Sku: W79105
Door Panel Hot Spot TX (TX), Almond
Door panel in Almond color for Hot Spot TX (TX) beginning in 2020$459.93 Select Options -
Sku: W79104
Door Panel Hot Spot TX (TX), Havana
Door panel in Havana color for Hot Spot TX (TX) beginning in 2020$459.93 Select Options -
Sku: W79103
Door Panel Hot Spot TX (TX), Storm
Door panel in Storm color for Hot Spot TX (TX) beginning in 2020$459.93 Select Options -
Sku: W79108
Long Side Panel Hot Spot TX (TX), Almond
Long side panel in Almond color for Hot Spot TX (TX) beginning in 2020$448.90
Showing 1–30 of 43 results