It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
Get important tools and hardware you need to maintain or fix your spa. This includes Screws, Bolts, Washers, Hose Clamps, Nuts, Power Cables, Silicone, Glue, Foam, Wrenches, Pliers, Custom Tools, and more.
Showing 1–30 of 47 results
-
Sku: 72961-DIS
Epoxy Dispensing Gun, 1:1 or 2:1 Ratio (2 Part), 50ML
This universal dispenser gun is used to dispense the two-part epoxy sealant Devcon 72961 and the Infinity Bond MMA 300 Fast Set Methacrylate Adhesive (72961-BYP) This dispenser is suitable for 50MIL applications and can dispense 1:1 ratio or 2:1 ratio ...read more -
Sku: 70292
Flow Tool, Meter with Attachments
Flow Tool, Meter with Attachments -
Sku: 71465
Tool, Flow Meter
Tool, Flow Meter -
Sku: 300055
Spring Clamp, 3/4 inch
3/4" spring clamp (aka wire clamp) is used to secure the 3/4 inch vinyl tubing (70315) to various components Note: Wear eye protection when squeezing these little rascals Service techs typically use either needle-nose pliers or hose clamp pliers to ...read more -
Sku: 31134
Spring Clamp, 1/4in
Used to secure 1/4" (ID) vinyl tubing 70318 (OD measure 7/16") to various components Note: Wear eye protection when squeezing these little rascals Service techs typically use either needle-nose pliers or hose clamp pliers to squeeze, then slide this ...read more -
Sku: 31228
Spring Clamp, 1/2in
1/2" spring clamp for securing 1/2" ID vinyl tubing (70316) to components Item 70316 has an inner diameter of 1/2" and an outer diameter of 3/4" This clamp fits the 3/4" OD Note: Wear eye protection when squeezing these little rascals Service techs ...read more -
Sku: 34465
Spring Clamp, 3/8in
3/8" spring clamp (aka wire clamp) is used to secure the 3/8 inch vinyl tubing 70317 (9/16" OD) to various components Note: Wear eye protection when squeezing these little rascals Service techs typically use either needle-nose pliers are hose clamp ...read more -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 1178401
Limelight Point of Light Removal Tool
This is the tool used to remove and reinstall the Points of Light LEDs used in Limelight brand spas -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
Sku: 34017
Equipment Door Fastener, Male Piece
This pointed fastener attaches onto the equipment compartment access door and is inserted into its counter-part fastener that is attached to the door frame of the equipment compartment -
Sku: 300602
Spring Clamp, 1in
1" spring clamp (wire clamp) used to secure 1" vinyl tubing -
Sku: 10057
Jet Spanner Wrench
Service Tool: This spanner wrench is designed to expand to the desired width and insert into the indentations on the outside ring of various jet wall fittings -
Sku: 34016
Door Frame Fastener, Female
This fastener screws onto the top of the equipment compartment door frame and serves as an alignment for the male fastener -
Sku: 72017
Fastener, LED Light (Qty 4)
Fasteners used to hold the housing for the LED light assembly in place on Hotsprings, Tiger River, and Limelight spas These are included if you purchase a replacement light assembly -
Sku: 30105
Romex Clamp 3/4in
This clamp is used as strain relief is used to secure the heater's power cord to the bottom of the IQ Control box The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down -
Non-metallic hinge for all pre-1995 wooden Hot Spring equipment compartment doors (access doors)
-
Sku: 70798
Warning Sign Kit
Warning / Safety Sign for all Watkins Manufacturing Spa Models This sign should be permanently posted near the spa where it is visible to all users of the spa -
Sku: 75007
Heater Flow Test Kit
This is a tool that is used by qualified Hotsprings Service Technicians to check the flow of water through the spa heater, to make sure there is adequate water flow for the heater to operate -
Sku: 1481101
Niche Nipple Repair Tool Blank
Niche nipple repair tool -
Sku: 50554
Spanner Wrench Air Valve
Spanner wrench air valve -
Sku: 70335
Jet Install Tool
Jet tool for the removal of the wall fitting on the 34167 jet -
Sku: 20018
Hinge, 7in
This door hinge was used on the Hot Spring spas -
Sku: 71066
Flow Tool
This flow tool is used to determine if the circulation pump flow is adequate to keep the spa from tripping the heater high-limit One end of this tool is used to unscrew the perforated drain grate and the other end is inserted into the drain The flow of ...read more -
Sku: 70825-BYP
Snap Ring Pliers Tool, Smart Jet Diverter Valve
These snap ring ("c"-ring) pliers can be used to remove the snap ring on Smart Jet diverter valves (71494, 71495, 73768, 73769) found in most hot tubs Made of carbon steel and vinyl grip handles and comes with interchangable straight, 45 degree and 90 degree ...read more -
Sku: 72284
Hand Reamer Tool
Hand reamer tool -
Sku: 20007
Hinge, 3.5in, Ivory
This is a Door Hinge, 3 5", Ivory color This is used on early Home/Personal & Indoor/Outdoor Hot Spring Spas -
Sku: 50017
Red Devil Scraper, 3010
Red Devil scraper, 3010 -
Sku: 70321
Extrusion, Trim
Extrusion, trim -
Sku: 71931
Phone Jack Crimp Tool
Phone jack crimp tool
Showing 1–30 of 47 results