It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
All the different jets and their related parts for your Hot Spring spa as well as Tiger River, Limelight, Solana and Hot Spot brands.
Showing 1–30 of 60 results
-
Sku: 37112
O-Ring, Precision Jet
Precision Jet o-ring fits between the interior spa shell and the wall fitting nut to prevent leaks from around the jet The o-ring creates a seal between the jet body and the back of the shell when compressed by the wall fitting nut -
Sku: 36057
Wallfitting, Rear, Precision Jet
Wall fitting (jet body) is installed behind the spa shell for the Precision Jet Both water and air lines feed this fitting The wall fitting nut (not included) inserts through the front of the spa shell and screws into this fitting with an o-ring positioned ...read more -
Sku: 36160
Precision Jet Tee
This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee This tee is not available at the local hardware store -
Sku: 33020
Air Tube O-Ring
This o-ring is used on all moto massage jets It goes on the outside of the blue or red air line that runs alongside the moto massage jet The air line slips over a barbed fitting at the back of the moto massage niche, and this o-ring slides over the air ...read more -
Sku: 36153
O-Ring, Front Wallfitting
Used on the Soothing Seven Jet and various other jets -
Sku: 32395
Tee, Venturi Jetstream
The venturi tee is plumbed with an air line that adds air to the water flowing out of the Jetstream Jet nozzle to increase its force Sometimes a 38390 air check valve is added to this part using a 1/2" PVC coupling -
Sku: 73484-1
Water Feature Valve Assembly O-Ring
O-ring used in various water feature on/off valve assemblies This item is a single o-ring -
White threaded Jet Stream wall fitting nut inserts through the spa shell and screws into the Jet Stream jet body on 1990-1993, 1997-2011 Hot Spring and Tiger River spas
-
Sku: 36058
Wallfitting, Front, Precision Jet
This wall fitting nut inserts through the spa shell from inside the spa and threads (screws) into the Precision Jet body located behind the spa shell This is the correct wall fitting for all the white-colored 1996 through 2003 Hot Spring spa models -
Sku: 36511
Faceplate, Moto-Massage, Cool Gray
This cool gray face place fits Hot Spring models beginning in 1997 and Solana models beginning in 2000 It fits over the Moto-Massage guide body and is held in place with three stainless steel screws Those screws are hidden under plastic screw covers that ...read more -
This charcoal gray face place fits Hot Spot TX and SX models beginning in 2020 It fits over the Moto-Massage guide body and is held in place with three stainless steel screws Those screws are hidden under plastic screw covers that just push into place
-
Sku: 10437
O-Ring, Wall Fitting
Silicone (rubber will break down in chlorinated water) o-ring to seal the wall fitting nut against the spa shell The wall fitting nut screws into the jet body that's located on the back of the spa shell -
Sku: 73537
Faceplate, DX Moto-Massage, Cool Gray
This is the cool grey version of the faceplate used for the motomassage jets on Hotsprings spas with dual motomassages There are two versions of the motomassage There is one that has a single head that goes up and down the center of the back of the ...read more -
Sku: 36087
Wallfitting Front, Soothing Seven Jet
Front Soothing Seven Jet wall fitting that screws into the rear of the jet body This piece is included in the Wallfitting kit (71362) -
Sku: 32420
Wallfitting Nut, Front
The wall fitting threads into the jet body that is located behind the spa shell and has a silicone o-ring on the spa side to prevent leaking Contrary to popular opinion this wall fitting is the least likely location of an internal leak in any Hot Spring spa -
Sku: 73271
Hydrostream Jet O-Ring
This o-ring is used in the Hydrostream jet for Hotsprings spas made from 2004-2011 It is seated between the jet body and the back side of the shell of the spa and makes the seal between the jet and the spa shell -
Sku: 73538
Faceplate, DX Moto-Massage, Warm Gray
This is the warm grey version of the faceplate used for the moto massage jets on Hotsprings spas with dual Moto Massages There are two versions of the Moto Massage There is one that has a single head that goes up and down the center of the back of the ...read more -
Sku: 35977
Wallfitting Front Nut
This white nut threads into the jet body that's located behind the spa shell -
Sku: 35986
O-Ring, Adj/Jet Small, Hot Spring
Small o-ring used on various jets -
Wall fitting nut o-ring
-
Sku: 73101
Wallfitting, Hydrostream Jet
Wallfitting, HydroStream Mid-Jet Hot Spring 2004 - 2011 -
Sku: 71362
Soothing Seven Wallfitting Assembly
This Soothing Seven wallfitting is the complete assembly but doesn't include the actual seven port nozzle (jet face) -
Sku: 36079
Faceplate, Moto-Massage, White
This white faceplate fits all 1997-2010 Hot Spring spas It fits over the Moto-Massage guide body and is held in place with three stainless steel screws Those screws are hidden under plastic screw covers that just push into place -
Sku: 32096
Jet Fitting Quick Change Plugged
Quick change jet fitting -
Sku: 76001
Collar, On and Off Valve
This collar is used for the on/off valve for the fountain on Hot Springs spas This collar is used to attach the valve to the bar top of the spa and is held in place by a plastic nut -
This o-ring rests behind the rear retainer of the nozzle to prevent water from flowing around the nozzle in the pre-1990 Hot Spring directional jet
-
Sku: 77185
Moto-Massage DX Faceplate, Cool Gray
This is the cool grey version of the faceplate used for the dual motomassage jets on Hot Spring spas beginning in 2014 Always use parts finder to be sure this part is for your spa -
O-ring used in various water feature on/off valve assemblies This item is for a package of ten (10) o-rings For a single o-ring use part number 73484-1
-
Sku: 32430
Jet Steam Venturi Tee, Hot Spring
Venturi tee is used in the 1990-1990 Hot Spring Jet Stream jet to siphon in air It is the addition of air the jet which gives it up to 50% more force -
Sku: 74130
Dream Jet O-Ring, Cylinder Base
O-Ring, Cylinder Base 2001 Hot Spring Landmark Dream Jet Massage System
Showing 1–30 of 60 results