great company to work with, from tech support to delivery of my parts ( A+)On 05/01/2024 by M. K. (verified customer)
All the different jets and their related parts for your Hot Spring spa as well as Tiger River, Limelight, Solana and Hot Spot brands.
Showing 1–30 of 40 results
-
Sku: 37112
O-Ring, Precision Jet
Precision Jet o-ring fits between the interior spa shell and the wall fitting nut to prevent leaks from around the jet The o-ring creates a seal between the jet body and the back of the shell when compressed by the wall fitting nut -
Sku: 36057
Wallfitting, Rear, Precision Jet
Wall fitting (jet body) is installed behind the spa shell for the Precision Jet Both water and air lines feed this fitting The wall fitting nut (not included) inserts through the front of the spa shell and screws into this fitting with an o-ring positioned ...read more -
Sku: 33020
Air Tube O-Ring
This o-ring is used on all moto massage jets It goes on the outside of the blue or red air line that runs alongside the moto massage jet The air line slips over a barbed fitting at the back of the moto massage niche, and this o-ring slides over the air ...read more -
Sku: 36153
O-Ring, Front Wallfitting
Used on the Soothing Seven Jet and various other jets -
Sku: 73484-1
Water Feature Valve Assembly O-Ring
O-ring used in various water feature on/off valve assemblies This item is a single o-ring -
White threaded Jet Stream wall fitting nut inserts through the spa shell and screws into the Jet Stream jet body on 1990-1993, 1997-2011 Hot Spring and Tiger River spas
-
Sku: 36058
Wallfitting, Front, Precision Jet
This wall fitting nut inserts through the spa shell from inside the spa and threads (screws) into the Precision Jet body located behind the spa shell This is the correct wall fitting for all the white-colored 1996 through 2003 Hot Spring spa models -
Sku: 10437
O-Ring, Wall Fitting
Silicone (rubber will break down in chlorinated water) o-ring to seal the wall fitting nut against the spa shell The wall fitting nut screws into the jet body that's located on the back of the spa shell -
Sku: 36087
Wallfitting Front, Soothing Seven Jet
Front Soothing Seven Jet wall fitting that screws into the rear of the jet body This piece is included in the Wallfitting kit (71362) -
Sku: 32420
Wallfitting Nut, Front
The wall fitting threads into the jet body that is located behind the spa shell and has a silicone o-ring on the spa side to prevent leaking Contrary to popular opinion this wall fitting is the least likely location of an internal leak in any Hot Spring spa -
Sku: 73271
Hydrostream Jet O-Ring
This o-ring is used in the Hydrostream jet for Hotsprings spas made from 2004-2011 It is seated between the jet body and the back side of the shell of the spa and makes the seal between the jet and the spa shell -
Sku: 35977
Wallfitting Front Nut
This white nut threads into the jet body that's located behind the spa shell -
Sku: 35986
O-Ring, Adj/Jet Small, Hot Spring
Small o-ring used on various jets -
Wall fitting nut o-ring
-
Sku: 73101
Wallfitting, Hydrostream Jet
Wallfitting, HydroStream Mid-Jet Hot Spring 2004 - 2011 -
Sku: 71362
Soothing Seven Wallfitting Assembly
This Soothing Seven wallfitting is the complete assembly but doesn't include the actual seven port nozzle (jet face) -
Sku: 32096
Jet Fitting Quick Change Plugged
Quick change jet fitting -
This o-ring rests behind the rear retainer of the nozzle to prevent water from flowing around the nozzle in the pre-1990 Hot Spring directional jet
-
O-ring used in various water feature on/off valve assemblies This item is for a package of ten (10) o-rings For a single o-ring use part number 73484-1
-
Sku: 74130
Dream Jet O-Ring, Cylinder Base
O-Ring, Cylinder Base 2001 Hot Spring Landmark Dream Jet Massage System -
Sku: 5024
JET, DUO BLASTER WALL FITTING
Jet wallfitting for the duo blaster jet used on the 2003-2005 Hot Spot spa models -
Sku: 70336
Wallfitting, Gray, Tiger River
The wall fitting (nut) fits through the jet cut-out in the spa shell and screws into the jet body that's located behind the spa shell This wall fitting has a silicone o-ring between it and the spa shell -
Sku: 36223
Jet Cover Gray
Trim set, Jet (Gray) Adjustable Jetstream Jet, 1994 - 1997 3 piece set, includes faceplate, eyeball nozzle, and eyeball retainer -
Sku: 34483
Front Butterfly Wallfitting, Gray
Jet Stream front wall fitting inserts through the cut hole in the spa shell and screws into the jet body that's located behind the spa shell This fitting is covered up by the jet face once the jet is installed -
Sku: 34422
Wallfitting, Jetstream
This adjustable Jetstream Jet wall fitting nut is used on the 1994-1997 and Hot Spring and Tiger River spa models and was originally white It inserts through the drilled hole in the spa shell and threads into the jet body The white-colored wall fitting is ...read more -
Sku: 31103
Wallfitting, Front Flanged
Wallfitting for jetstream jet on Hotspring models in 1989 -
Sku: 72982
Mini Jet Front O-Ring
Mini jet front o-ring -
Sku: 30491
Wallfitting Nut, Hot Spring
This wall fitting nut screws into the jet body with the spa shell sandwiched between in the pre-1990 Hot Spring spa models -
This wall fitting nut inserts through the spa shell from inside the spa and threads (screws) into the Precision Jet body located behind the spa shell
-
Obsolete by factory: Use 36058 This is the Taupe color of the front portion of the wallfitting for the precision jets used on Solana and Hotspring spas from 2000 to 2003 It screws into the rear wallfitting to hold the assembly in place and sandwich the ...read more
Showing 1–30 of 40 results