great company to work with, from tech support to delivery of my parts ( A+)On 05/01/2024 by M. K. (verified customer)
Brand: Hot Spring Pre 89, Limelight
Showing 1–30 of 35 results
-
Sku: 73307Moto Massage Jet Assembly, Warm Gray
The Warm Gray colored Moto Massage Jet is the current factory replacement for some Hot Spring and Hot Spot spa models This jet comes complete with the Silicone Air Tube (70307), Cap (30723) and O-ring -
Sku: 73542Moto Massage DX (Dual) Jet, Warm Gray
This is the replacement warm gray colored Moto Massage Jet used on the 2005-2013 Hot Spring spa models equipped with the Dual Moto Massage Jet (DX) and used on the Limelight Gleam model beginning in 2013 The manifold air supply (73540) is sold separately ...read more -
Sku: 73540Manifold, DX Moto Massage Jet
Air supply tube with attached manifold for the dual Moto Massage Jet DX The DX Moto-Massage is found on Hot Spring models and the Limelight Gleam If you have already tried running the jets with all the filters removed and the DX Jet still doesn't travel, ...read more -
Sku: 70307Silicone Air Tube, Moto Massage Jet
This silicone air tube attaches onto the Moto Massage Jet If it breaks or splits, the Moto Massage Jet won't receive the proper air mixture which in turn will cause it to stop traveling The o-ring (33020) and the cap (30723) are included -
Cool Gray-colored screw cover fits over the stainless steel screw that secures the Moto Massage faceplate to its guide body on 1997-2008 Hot Spring spas Three of these are used for each Moto Massage faceplate Priced individually -
This stainless steel screw is used to secure the Moto-Massage faceplate to its guide body on many Hot Spring and Solana spa models Also used on the 1995-1999 Hot Spring Dream Pillow Jet Check your serial number in the parts finder to be sure this part ...read more -
Sku: 30365Screw, 1/4in-20 X 3/4in Stainless Steel
Stainless steel screw used for various purposes including securing the Moto-Massage guide body to the spa shell and the Moto-Massage Face Plate to the guide body Also used on some skimmer weirs to secure them to the spa shell and replaces the 33514 door ...read more -
Sku: 73539Air Tube, DX Moto-Massage Jet
Silicone air tube used on the Dual Moto-Massage Jet replacement (73542) for select Hot Spring Models from 2005 to 2018, and the Limelight Gleam from 2013 to 2017 It comes with the O-Ring (33020) and Plastic Cap (30723) -
Sku: 33020Air Tube O-Ring
This o-ring is used on all moto massage jets It goes on the outside of the blue or red air line that runs alongside the moto massage jet The air line slips over a barbed fitting at the back of the moto massage niche, and this o-ring slides over the air ...read more -
Sku: 30723Moto-Massage Air Tube Cap
This cap holds the small blue silicone air tube (70307) onto the Moto-Massage Jet -
White-colored screw cover fits over the stainless steel screw that secures the Moto Massage faceplate to its guide body on all 1997-2008 white-colored Hot Spring spas Three of these are used for each moto massage faceplate Priced individually -
White-colored screw cover fits over the stainless steel screw that secures the Moto Massage faceplate to its guide body on all 1989-1996 white-colored Hot Spring spas Two of these are used for each moto massage faceplate Priced individually -
Sku: 36511Faceplate, Moto-Massage, Cool Gray
This cool gray face place fits Hot Spring models beginning in 1997 and Solana models beginning in 2000 It fits over the Moto-Massage guide body and is held in place with three stainless steel screws Those screws are hidden under plastic screw covers that ...read more -
Sku: 73564Dual Moto-Massage Niche Fitting
This is the fitting that screws into the rear wall in the motomassage niche for spas with the motomassage DX, which has two heads that move up and down This fitting accepts the air line that supplies the air for the motomassage -
Sku: 73537Faceplate, DX Moto-Massage, Cool Gray
This is the cool grey version of the faceplate used for the motomassage jets on Hotsprings spas with dual motomassages There are two versions of the motomassage There is one that has a single head that goes up and down the center of the back of the ...read more -
Sku: 36557Extrusion Shim, Moto-Massage Long
This shim is installed in the back of the Motomassage niche above where the Motomassage jet connects to the water supply and helps regulate the motion of the Motomassage jet Replacement for Short Extrusion Shim (36143) -
Sku: 36079Faceplate, Moto-Massage, White
This white faceplate fits all 1997-2010 Hot Spring spas It fits over the Moto-Massage guide body and is held in place with three stainless steel screws Those screws are hidden under plastic screw covers that just push into place -
(Set of 3) Taupe colored Moto-Massage screw covers hide the stainless steel screws that secure the Moto-Massage faceplate to its guide body on 2002-2003 Hot Spring spas -
Sku: 31234Guide Body, Moto-Massage Jet
Replacement Moto-Massage Guide Body for all 1993-1996 white-colored Hot Spring spa models -
Sku: 31019Sticker, Moto-Massage, Blue
This sticker was used on Pre-1994 Hot Spring spas with a moto massage jet It is applied to the handle of the air valve that allows the airflow for the moto massage jet to be turned up and down -
Sku: 73306Screw Cover, Moto-Massage Faceplate, Warm Gray
This item is obsolete and replaced by:
36510Temporarily on Backorder from the factory Warm Gray-colored Moto-Massage screw covers hide the stainless steel screws that secure the Moto-Massage faceplate to its guide body on Hot Spring spas beginning in 2006 Three of these are used for each ...read more -
Sku: 20011Guide Body, Moto-Massage Jet
Obsolete: No factory replacement available Replacement Moto-Massage Guide Body for all 1983-1993 white-colored Hot Spring spa models -
Obsolete: use 36511 in cool gray This warm gray face place fits Hot Spring and Solana spas It fits over the Moto-Massage guide body and is held in place with three stainless steel screws Those screws are hidden under plastic screw covers that just push ...read more -
OBSOLETE- Use 36202 This white face plate fits over the Moto-Massage guide body and is held in place with two stainless steel screws Fits all 1989-1996 Hot Springs -
OBSOLETE Use the 73307 Warm Gray color (light beige) -
OBSOLETE- Use the 73305 This taupe colored face place fits all 1997 forward Hot Spring and 2000 forward Solana spas It fits over the Moto-Massage guide body and is held in place with three stainless steel screws Those screws are hidden under plastic screw ...read more -
OBSOLETE-Use the warm gray standard faceplate 73305 This taupe colored Moto-Massage faceplate is an option for those of us who like variety This face place generates a completely different massage Fits on all 1997 forward Hot Spring and 2000 forward ...read more -
OBSOLETE: Use the 73307 Warm Gray (ie, Light Beige) This off white (ivory color) Moto-Massage Jet is the factory replacement for all white-colored 1989-2008 Hot Spring spa models This jet comes complete with the silicone air tube (70307 ) and the cap ...read more -
OBSOLETE , use 36557 as an alternative This shim is installed in the back of the motomassage niche above where the motomassge jet connects to the water supply and helps regulate the motion of the motomassage jet -
Sku: 30414Washer, Poly 1/4in X 5/8in
OBSOLETE at the factory Available at hardware stores
Showing 1–30 of 35 results