Good company. Honest. ThanksOn 06/03/2024 by D. S. (verified customer)
Light lenses, LED spa lights, wiring harnesses, and other related parts for Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models.
Showing 1–30 of 41 results
-
The silicone gasket/o-ring fits on the light lens on all 2000-forward Hot Spring & Tiger River spas as well as the lens that's part of the retrofit kit for all 1989-1999 Hot Spring & Tiger River spa models This is the o-ring only If you need the ...read more
-
The lens includes silicone o-ring and replaces the light lens on all 2000-forward Hot Spring & Tiger River spas as well as the lens that's part of the retrofit kit for all 1989-1999 Hot Spring & Tiger River spa models This lens has threads and ...read more
-
Sku: 72961
Repair Adhesive Kit (for light lens)
NOT AVAILABLE TO ALASKA OR HAWAII RESIDENTS This is the newest special underwater, chlorine resistant epoxy that's formulated to bond the light lens to the spa shell's thermoplastic It is also used to repair small cracks and comes with two mixing nozzles ...read more -
NOT AVAILABLE TO ALASKA OR HAWAII RESIDENTS Comparable to Devcon chlorine resistant epoxy, the Infinity Bond MMA 300 is formulated to bond the light lens to the spa shell's thermoplastic It is also used to repair small cracks and comes with two mixing ...read more
-
Replaces the original lens found on all white-colored 1989-1999 Hot Spring spa models with this retro-fit lens The newest special underwater, chlorine resistant epoxy that's formulated to bond the light lens to the spa shell's thermoplastic, can be added ...read more
-
Sku: 37603
L.E.D. Hot Spring Control Panel Light
L E D control panel light that connects onto the 37611 fiber optic strip (filament) to produce the blue light This item is found on all 1998-2009 5 Hot Spring control panels This light plugs into the control head (73225) and emits light that illuminates ...read more -
This Hot Spring/Tiger River light lens wallfitting is epoxied onto the equipment side of the spa shell for the lens (71830) to screw into the inside threads The bezel (trim piece) then screws onto the outside threads
-
Sku: 74415
Pillow Light, Clear Housing
This is a set of two clear lenses for the LED lights used for the underpillow lighting on 2007 to the end of 2016 Hotsprings brand spas Each of these lenses will hold one multicolor LED light for accent lighting behind the spa pillows See also ...read more -
Sku: 71922
Light Lens Bezel, Hot Spring, Cool Gray
This Cool Gray light lens bezel screws onto the outside of the lens wall fitting assembly (71923) and the 71925 wall fitting and serves as a trim piece for a finished look of the lens itself (71830) on all 2000-2011 Hot Spring spa models that use cool gray ...read more -
Replacement lens for non-white colored spa shells on 1996-1999 Hot Spring spas
-
Sku: 38859
Housing, Led Light
Black plastic housing that holds the LED light circuit board and mounts to the spa This housing is included with the LED Multi-colored light (Luminescence) item 72642 on all 2001 forward Hot Spring, Tiger River, and Limelight spa models This listing is for ...read more -
Sku: 76534
Light Lens Bezel with Escutcheon
This is the bezel trim ring for the light lens used on 2012-2013 Hot Springs spas It has a Stainless Steel Escutcheon -
This trim ring is for the light lens used on all Hot Springs spas beginning in 2014 It has a Stainless Steel Escutcheon (outer trim piece) Check your serial number in the parts finder to be sure this part is for your spa
-
Sku: 73628
Soothing Stream LED Harness
Light harness with low voltage power connector for the Soothing Stream (aka Wellspring) water feature on all 2005 forward Hot Spring Grandee, Sovereign, and Vanguard, spa models Note: If used as a replacement for the 2004 LED Harness (p/n 73399), you must ...read more -
Sku: 74880
Ace Multizone Power Supply
This is the power supply for the multizone lighting controller which controls the lighting behind the pillows, moto-massage niche as well as around the valve lever used from 2009-2012 It is also the power supply for the Ace Chlorine Generator -
Sku: 71923
Wallfitting Assembly, White
ON BACKORDER WITH THE FACORY - NO CURRENT ETA This is a white colored replacement retrofit light lens wallfitting It is epoxied onto the spa shell so the lens can then screw into the inside threads of this part The bezel (exterior trim ring) then screws ...read more -
Sku: 74414
Pillow Light Harness
Pillow light harness -
Sku: 74150
I2 C/RS485, 5-Port Comm Hub, IQ 2020
This 5 port I2C/RS485 adapter is used to "expand" the IQ2020 Controller to allow other accessories to plug into the motherboard If you're adding on an IQ 2020® Navigator RF Remote, Music System, Luminescence Multi-Colored LED Light, etc , you'll need this ...read more -
Sku: 71292
Lampholder, Hot Spring
This lamp holder was used for all Hot Spring spa models from 1995-2000 to connect the blue flood light bulb to the control box -
Sku: 72017
Fastener, LED Light (Qty 4)
Fasteners used to hold the housing for the LED light assembly in place on Hotsprings, Tiger River, and Limelight spas These are included if you purchase a replacement light assembly -
Sku: 30262
Lampholder, Hot Spring, Pre-1995
Lampholder for all Hot Spring spa models prior to 1995 -
Sku: 74413
Pillow Light Control Board
This board is used inside the IQ2020 control box from 2008 to 2009 5 Hot Springs spas to enable the lighting behind the pillows to be connected to the control box -
Sku: 74697
Clarion LED Light Bars (3 to a kit)
The Clarion® lighting system There is something about cobalt blue lighting that mellows the soul Is it that resemblance to a black light Who knows One thing for certain though, when your friends see your spa glowing in the night there is a WOW factor The ...read more -
Sku: 73256
Clarion Brackets
These brackets are used to mount the Clarion Light Bars to the spa or step or where ever desired Five sets of left and right pairs are included in each pack -
Sku: 73161
Adapter Board, Clarion
This adapter board is used to expand the number of pins available in a 2004-2008 IQ 2020 Control Box to enable the Clarion LED Light Bars accessory a space to plug in to -
Sku: 30314
Lampholder Gasket
Lampholder gasket found on Hot Spring models from 1998-1994 -
Sku: 71001
Lamp Wire Guard, 1/2in, Hot Spring
Wire Guard, 1/2 inch This Wire Guard protects the wiring for the Hot Spring Lampholder, Hot Spring Models from 1995 - 2000 -
Sku: 74928
Soothing Stream LED Harness
This is the LED light harness for the current soothing stream waterfall -
Sku: 39884
Light Lens Bezel, Taupe
Taupe light lens bezel -
Sku: 72642
Luminescence Multi-Colored LED Light
Obsolete "Eye massage" That's what our customers say about the Luminescence® and its many settings The favored of all modes is to set the Luminescence colors into a slow soothing loop, transitioning to the red, then blue, then green and amber and back ...read more
Showing 1–30 of 41 results