PLUMBING

Find all the plumbing parts you need here. Flexi PVC tubing, Vinyl Tubing, Elbows, Tees, Diverter Valves, Levers & Bezels, Check-Valves, Couplers, and more.

Plumbing: Check Valve, Tee

Showing 1–30 of 57 results

  • Tubing Kit, Del-Ozone-1/4in with Check valve
    This 1/4" ID (3/8" OD)  ozone-resistant tubing works with UO3 ozone generator It includes an attached 1/4" ozone-resistant check valve, clamps, mounting screws, and new flag terminals This assembly is approx five feet in length Note: There is a small ...read more
    $20.12 View OEM
    Add to cart
  • Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar with Check valve
    This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators It is the replacement for all Freshwater 3 ozonators It includes an attached 1/4" ozone-resistant check valve This assembly is approx six feet ...read more
    $55.00 View Generic
    Add to cart
  • Water Check Valve, 3/4 inch
    This 3/4" water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the backflow of water through the circulation pump once the jet pump is activated All water check valves have arrows stamped on the outside to indicate ...read more
    $8.25
    Add to cart
  • Check Valve (Air), Hot Spring, Tiger River, Limelight, Hot Spot
    Air check valve for Hot Spring, Tiger River, and Hot Spot spa models This check valve is located in the equipment compartment under the bartop Its primary function is to prevent water from back flowing into the equipment compartment should a hydrotherapy ...read more
    $20.09
    Add to cart
  • Check Valve, Air, with Ball 1/2in
    It is used to prevent water from backing into the airlines when the jets are off It is at the back of the Moto-Massage housing and glued into a 90-degree elbow It is also on the jetstream jets
    $1.74
    Add to cart
  • Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.
    Over time an Ozonator check valve will breakdown under the harsh conditions of ozone Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber Rubber diaphragms last about a month before the rubber becomes hard
    $19.53
    Add to cart
  • Precision Jet Tee
    This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee This tee is not available at the local hardware store
    $14.43
    Add to cart
  • Air Check Valve Tiger River and Hot Spring Pre-1997
    This air check valve is located in the equipment compartment, up high, under the bar top If a hydrotherapy jet should become obstructed (like when a guest sticks their finger in the jet), this item becomes critical in preventing water from back flowing into ...read more
    $24.28
    Add to cart
  • Hartford Loop Assembly
    This retrofit kit is used to replace the air check valve that was used in some Hot Spring spa models This kit replaces the obsolete 72342 Check your serial number in the parts finder above to be sure this part is for your spa
    $71.07
    Add to cart
  • Bypass Tee
    This assembly is found on all Tiger River spas This 3/4" x 1/2" tee has 3/4" male barbed fittings on each end and a 1/2" barbed male fitting on the elbow It is located in front of the circulation pump between the check valve (35233) and the inlet of the ...read more
    $23.43
    Add to cart
  • Water Check Valve, 1-1/2" Inside Diameter, 2in Outside Diameter
    This "Jet System" check valve is used on all Hot Spring models and all Tiger River spas This check valve engages when the diverter valve is changed to different positions For convenience, the inside diameter of this check valve is 1-1/2" and the outside ...read more
    $29.48
    Add to cart
  • Check Valve, Safety Suction
    This check valve's function is to "open" when someone puts their hand over the jet pumps suction fitting within the filter intake This check valve will "open" drawing air into it from the equipment compartment, thereby stopping suction of the jet pump This ...read more
    $43.01
    Add to cart
  • Tee, 1/4in X 1/4in X 1/4in Black Polybarb
    Barbed tee 1/4" on all three sides Used with 1/4" vinyl tubing and 1/4" clamps
    $3.89
    Add to cart
  • Check Valve, with Spring, 1-1/2in
    1-1/2" spring style check valve is commonly found between the jet pump and filter housing on Tiger River spas This check valve automatically closes when the Tiger River spas jet pump is turned off so the circulation pump (Silentflo 5000) can then draw water ...read more
    $37.41
    Add to cart
  • Diverter Valve Wallfitting Nut
    Tee, Barbed, Black Poly, 1/2" x 1/2" x 1/2"
    $3.60
    Add to cart
  • Tee, 1/2in Slip X Slip X Slip
    This PVC tee will accept 1/2" male rigid or flexible PVC pipe or male PVC fittings   1/2" schedule 40 thick-walled clear vinyl PVC can also be glued directly to this fitting   PVC primer and cement should be used on this fitting   Failing to use primer ...read more
    $4.64
    Add to cart
  • Manifold, Flow Cone
    PVC tee, 2" X 1-1/2" X 1-1/2" slip
    $9.22
    Add to cart
  • Manifold, Flow Cone
    Tee for 2 position diverter valve
    $18.34
    Add to cart
  • Manifold, Flow Cone
    This tee allows three 2" male PVC slip connections, or 2" PVC pipe (rigid or flexible) to be joined together, one of which is perpendicular to the other two connections   PVC primer and glue should be used to adhere to the male connections tog the fitting
    $6.39
    Add to cart
  • Cap, Air Valve Lever, Taupe
    This is a regular 3/4"Slip x 3/4" Slip x 3/4" Slip pvc fitting available at most hardware stores
    $3.38
    Add to cart
  • Cap, Air Valve Lever, Taupe
    This elbow is used to join two 2" male PVC slip fittings or 2" PVC rigid or flex pipes together at a 45 degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $6.39
    Add to cart
  • Cap, Air Valve Lever, Taupe
    This PVC tee has three connections   The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting   The other connection, perpendicular to the other connections accepts a 1 1/2" PVC pipe or ...read more
    $20.19
    Add to cart
  • Check Valve, Flow Control
    This check valve is plumbed in line with the Bella Fontana and Amur water features in Hotsprings and Tiger River spas to keep the water flow through the fountain the same when the jet pumps are changed from low speed to high speed and vice versa
    $54.79
    Add to cart
  • Compression Fitting with Check Valve, Tiger River
    This compression fitting (aka pump union, quick disconnect, coupling) is used on the discharge side of the Tiger River Wavemaster Pumps to ensure that the small Silentflo 5000 or 5002 circulation pump pulls water through the filter when the jet pump is off ...read more
    $48.62
    Add to cart
  • Air Check Valve, Hot Spring Grandee
    This one-way check valve was used in the Hot Spring Grandee from 1989-1993 for the Jet Stream Jet air intake All jets in a Hot Spring have both an air and water mixture If someone put their finger in a jet nozzle and restricted the water flow, water could ...read more
    $30.28
    Add to cart
  • Check Valve, Air, Hot Spring Classic
    Air check-valve used the 1991-1993 Classic spa only for the JetStream Jet For the '89-'93 Grandee see part  70326
    $17.52
    Add to cart
  • Cap, Air Valve Lever, Taupe
    This Tee accepts three 1 inch PVC pipe connections or male PVC fittings   All connections should be made using both PVC primer and PVC cement   The connections are oriented in a T style layout
    $4.92
    Add to cart
  • Check Valve (Water) 1/2in
    This 1/2" water check valve is used on the discharge side of the old Laing circ pumps in pre-1990 Hot Spring 115volt Sovereign, Classic, Prodigy & Jetsetter models This is for 1/2" plumbing If your plumbing is 3/4" then use part 35233
    $52.54
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Tee, PVC, 3/4" X 1/2" X 1/2"
    $4.61
    Add to cart
  • Tee, 2in X 2in X 1in Slip X Slip X Slip
    This PVC tee has three connections   The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting   The other connection, perpendicular to the other connections accepts a 1" PVC pipe or male ...read more
    $13.49
    Add to cart

Showing 1–30 of 57 results