Plumbing Fittings

Plumbing: Assembly Kit, Plug, Reducer, Wye

Showing 1–30 of 43 results

  • Drain Plug, Wavemaster
    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart
  • 449-020 2in Plug
    This is a 2" PVC plug   It can be used to plug any 2" female PVC fitting and should be installed using PVC primer and cement   You can get PVC cement at your local hardware store
    $4.69
    Add to cart
  • Diverter Valve Wallfitting Nut
    Drain Valve used on most 2004 and some 2005 Tiger River and Hot Spring spas It is opened by twisting the hose bib counter-clockwise and pulling the bib forward, and then removing the protective cap   The cap also served as a way to grip the big   Closed by ...read more
    $41.26
    Add to cart
  • Wye, 3/4in, 475-007
    Wye, PVC, 3/4" X 3/4" X 3/4" (Slip X Slip X Slip)
    $7.11
    Add to cart
  • Manifold, Flow Cone
    Reducer Bushing, 3/4" Spig x 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 3/4" female slip fitting   The connection should be made using PVC primer and cement
    $3.25
    Add to cart
  • Reducer, 2in X 1-1/2in Spig X Slip
    Reducer Bushing, 2" Spig x 1-1/2" Slip   This bushing allows for a 1 1/2" male slip fitting or PVC pipe, rigid or flexible, to connect to a 2" female slip fitting   The connection should be made using PVC primer and cement
    $5.95
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Plug, PVC, 3/4" Spig   This plug is made out of PVC and fits in a female PVC slip fitting   It can be used to plug an extra port on a manifold or tee that is not needed   Or cap off a piece of plumbing that is no longer used
    $5.05
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Reducing Bushing, 1"Spig X 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Reducer Bushing, 1" Spig x 3/4" Slip   This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Elbow, 3/4in Poly Barbed
    This adapter is used to join a 3/4" PVC male fitting and a 1" PVC male fitting together   PVC primer and cement should be used to adhere the fittings
    $5.46
    Add to cart
  • Elbow, 3/4in Poly Barbed
    The three pieces of this pump inlet assembly come pre-assembled and include the check valve This assembly was used on the jet pump on the 1989-1990 Hot Spring Grandee (G 191001 to G 109999)
    $51.10
    Add to cart
  • Elbow, 3/4in Poly Barbed
    This part can be found on many Hot Spring, Limelight, Hot Spot models beginning in 2003
    $15.55
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Reducer Bushing, 2" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 2" female slip fitting   The connection should be made using PVC primer and cement
    $6.87
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Wye, PVC, 1" X 1" X 1" (Slip X Slip X Slip) 22 5 Degrees
    $13.80
    Add to cart
  • Drain Assembly, Hot Spot
    This drain assembly is used on the Wavemaster 3000 and has a 1-1/2" union coupling (compression fitting) on one end, a slip 1-12" PVC fitting and then a 3/4" male hose fitting for draining on the 1995-1996 Hot Spot spa models This assembly connects onto the ...read more
    $48.92
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Air injector
    $19.55
    Add to cart
  • Drain Assembly, Hot Spot Z
    This drain assembly is used on the Wavemaster 3000 and has a 1-1/2" union coupling (compression fitting) on each end and a 3/4" male hose fitting for draining the 1993-1994 Hot Spot Round (Z model) spa This assembly connects onto the jet pump and the Hot ...read more
    $69.84
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Barbed PVC "Y" 1/2in
    $10.80
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This PVC fitting is used to plug 1 1/2" female PVC slip fittings   It should be attached using PVC primer and cement, which is available at your local hardware store   It is made out of white PVC plastic
    $14.63
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This is a 1" PVC plug   It is used to plug a 1" female PVC fitting and should be attached using PVC cement and PVC primer   This will usually be used when a fitting has multiple openings, and not all of the openings are being used
    $5.74
    Add to cart
  • Plug 1/2in Spig
    Plug, PVC, 1/2" Spig
    $5.54
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing 1-1/2" Spig x 3/4 female iron pipe thread   This bushing allows a 3/4" male pipe threaded fitting to be adapted to fit in a 1 1/2" female slip fitting   The connection should be made using PVC primer and cement on the slip portion of the ...read more
    $7.18
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1-1/2" Spig x 1-1/4" Slip  This bushing reduces a 1 1/2" female slip fitting down to a 1 1/4" female slip fitting   PVC primer and cement should be used to glue the bushing in place
    $4.97
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1-1/4" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1 1/4" female slip fitting   The connection should be made using PVC primer and cement
    $5.05
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This is a PVC coupler that allows two PVC pipes to be joined together using PVC primer and cement   One side of the coupler accepts a 1/2" PVC pipe, either rigid or flexible, and the other side accepts a 3/4" PVC pipe, either rigid or flexible
    $3.83
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This black hole plug is used on most Hot Spot spas to plug unused holes provided for electrical conduit   Usually, there are two holes predrilled, so that the conduit can enter the equipment compartment of the spa from either side   This plug is used to ...read more
    $1.39
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1/2" Spig x 3/8" Slip This bushing allows a 3/8" male slip fitting or 3/8" PVC or vinyl pipe, rigid or flexible, to be adapted to fit in a 1/2" female slip fitting   The connection should be made using PVC primer and cement
    $3.31
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Wye, 1-1/2in sp x slip x 3/4in slip
    $14.32
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer coupling, 2 X 1 5
    $6.80
    Add to cart

Showing 1–30 of 43 results