Plumbing Fittings

Plumbing: Air Manifold, Plug, Reducer

Showing 1–30 of 39 results

  • Drain Plug, Wavemaster
    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart
  • 449-020 2in Plug
    This is a 2" PVC plug   It can be used to plug any 2" female PVC fitting and should be installed using PVC primer and cement   You can get PVC cement at your local hardware store
    $4.69
    Add to cart
  • 5 Port Air Manifold, 1in x 3/8in
    PVC air manifold, 1" X 3/8", 5-Port
    $3.89
    Add to cart
  • Manifold, Flow Cone
    Reducer Bushing, 3/4" Spig x 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 3/4" female slip fitting   The connection should be made using PVC primer and cement
    $3.25
    Add to cart
  • Air Manifold, PVC 1inx3/8in, 4 Port
    PVC air manifold, 1" X 3/8", 4-Port
    $3.36
    Add to cart
  • Air Manifold, 4 Port, 3/8in Barbs
    This four-port manifold is typically used to feed air to the Precision Jets in a Hot Spring and Tiger River spa This 4 port manifold comes with one end capped off and the other end is 1" slip Depending on the current configuration of yours, the 1" may need ...read more
    $11.94
    Add to cart
  • Reducer, 2in X 1-1/2in Spig X Slip
    Reducer Bushing, 2" Spig x 1-1/2" Slip   This bushing allows for a 1 1/2" male slip fitting or PVC pipe, rigid or flexible, to connect to a 2" female slip fitting   The connection should be made using PVC primer and cement
    $5.95
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Plug, PVC, 3/4" Spig   This plug is made out of PVC and fits in a female PVC slip fitting   It can be used to plug an extra port on a manifold or tee that is not needed   Or cap off a piece of plumbing that is no longer used
    $5.05
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Reducing Bushing, 1"Spig X 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Reducer Bushing, 1" Spig x 3/4" Slip   This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Elbow, 3/4in Poly Barbed
    This adapter is used to join a 3/4" PVC male fitting and a 1" PVC male fitting together   PVC primer and cement should be used to adhere the fittings
    $5.46
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Reducer Bushing, 2" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 2" female slip fitting   The connection should be made using PVC primer and cement
    $6.87
    Add to cart
  • 2 Port Air Manifold, 1in PVC Barb Adapter 3/8
    PVC air manifold, 1" Barb Adap, 3/8", 2-Port
    $4.32
    Add to cart
  • 8-Port Air Manifold
    8-port PVC air manifold
    $8.57
    Add to cart
  • 10 Port Air Manifold
    Air manifold: 10" long with 1/2" barbed in and 3/8" barbed out x 10
    $23.65
    Add to cart
  • 7 Port Air Manifold, 1in X 1in X 3/8in
    This 6 port air manifold is used in various spa models It's a one-inch slip with six 3/8" barbed nipples to connect the 3/8" tubing For the 1/2" version see part 38397
    $9.11
    Add to cart
  • 6 Port Air Manifold, 1/2in X 1/2in X 3/8in
    This 6 port air manifold is used in various spa models It's half-inch slip with six 3/8" barbed nipples to connect the 3/8" tubing For the 1" version see part 39703
    $12.16
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This PVC fitting is used to plug 1 1/2" female PVC slip fittings   It should be attached using PVC primer and cement, which is available at your local hardware store   It is made out of white PVC plastic
    $14.63
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This is a 1" PVC plug   It is used to plug a 1" female PVC fitting and should be attached using PVC cement and PVC primer   This will usually be used when a fitting has multiple openings, and not all of the openings are being used
    $5.74
    Add to cart
  • Plug 1/2in Spig
    Plug, PVC, 1/2" Spig
    $5.54
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing 1-1/2" Spig x 3/4 female iron pipe thread   This bushing allows a 3/4" male pipe threaded fitting to be adapted to fit in a 1 1/2" female slip fitting   The connection should be made using PVC primer and cement on the slip portion of the ...read more
    $7.18
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1-1/2" Spig x 1-1/4" Slip  This bushing reduces a 1 1/2" female slip fitting down to a 1 1/4" female slip fitting   PVC primer and cement should be used to glue the bushing in place
    $4.97
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1-1/4" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1 1/4" female slip fitting   The connection should be made using PVC primer and cement
    $5.05
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This is a PVC coupler that allows two PVC pipes to be joined together using PVC primer and cement   One side of the coupler accepts a 1/2" PVC pipe, either rigid or flexible, and the other side accepts a 3/4" PVC pipe, either rigid or flexible
    $3.83
    Add to cart
  • 10 Port Air Manifold
    This manifold allows 10 air lines to be connected to one air valve   It is used mostly on Hot Spot brand spas but is used on other brands as well   The PVC fittings are 3/4" slip and PVC primer and cement should be used to bond them   And the 10 fittings ...read more
    $10.28
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This black hole plug is used on most Hot Spot spas to plug unused holes provided for electrical conduit   Usually, there are two holes predrilled, so that the conduit can enter the equipment compartment of the spa from either side   This plug is used to ...read more
    $1.39
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1/2" Spig x 3/8" Slip This bushing allows a 3/8" male slip fitting or 3/8" PVC or vinyl pipe, rigid or flexible, to be adapted to fit in a 1/2" female slip fitting   The connection should be made using PVC primer and cement
    $3.31
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer coupling, 2 X 1 5
    $6.80
    Add to cart
  • Reducing Bushing 2 1/2 In x 2 In
    Reducing bushing 2 1/2 inch by 2 inch for Hot Spot models beginning in 2003, Hot Spring models beginning in 2007, and Limelight models beginning in 2019
    $17.06
    Add to cart

Showing 1–30 of 39 results