great company to work with, from tech support to delivery of my parts ( A+)On 05/01/2024 by M. K. (verified customer)
Get Watkins Wavemaster Pumps, Circulation Pumps, Wet-end Kits, Impellers, Shaft Seals, O-rings, Compression Fittings, and other parts related to your pumps.
Showing 1–30 of 47 results
-
Sku: 72201
Pump, Wavemaster 6000
This recently redesigned Wavemaster® 6000 jet pump is the current replacement for the original pump found on all spa models listed below Pump comes with a choice of discharge positions, 12 o'clock, 3 o'clock and 9'clock Select your option before adding to ...read more -
Sku: 31239-BYP
Pump, Sta-rite 2hp for Hot Spring
This two horsepower single speed pump assembly was used on the Hot Spring Highlife model from 1989-1993 -
Sku: 31239-NO-VOLUTE-BYP
Pump, Sta-rite 2hp, Hot Spring (without volute cover and clamp)
Sta-rite two horsepower single speed jet pump (minus the volute cover and stainless steel clamp) is the replacement for the pump used on the 1989-1993 Hot Spring Highlife -
Sku: 77710-BYP
Wet End Kit, Watkins Wavemaster 6000 Jet Pump, 48 Frame, 1.5HP, SD, 2″MBT, After-Market
This is the after-market "Wet End" is for the Watkins Wavemaster® 6000 jet pump as well as the Wavemaster® 5000 (1 5 HP) that was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models -
Sku: 71404
Impeller, Wavemaster 6000
Replacement impeller for the Watkins Wavemaster 6000 jet pump This impeller screws onto the pump motor's threaded shaft with regular right-hand threads Please verify your pump's model number and vendor code when selecting replacement parts -
Sku: IMP-77710
Impeller, Watkins Wavemaster 6000 Jet Pump, 1.5 HP, LX
This impeller is used on the Watkins Wavemaster 6000 jet pumps made by LingXiao (LX) brand It is rated for 1 5 horsepower and fits on a pump with a vendor code of 3536 This impeller screws onto the pump motor's threaded shaft with regular right-hand ...read more -
Sku: 30237-x2-BYP
Compression Fitting O-ring, for 1-1/2 inch Union (Qty. of 2)
1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump No Teflon tape is needed for the jet pump ...read more -
1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump No Teflon tape is needed for the jet pump ...read more
-
Sku: 30413
Mounting Bolt Washer, Wavemaster
Stainless steel washer used with the bolts that secure a pump to the pump stand and the pump stand to the floor of the equipment compartment 5/16" -
This after-market impeller is used on the after-market Wavemaster 5000 and 6000 jet pumps This 1 5 HP impeller screws onto the pump motor's threaded shaft with regular right-hand threads
-
Sku: 30215-Motor-BYP
1HP Starite Energy Effiecient Motor
The is the energy efficient replacement motor for the 1hp Sta-Rite pump used in some pre-1994 Hot Spring spas This motor was discontinued by Hot Spring and comes from another vendor -
Sku: 31239-Motor-BYP
Motor Only, Sta-rite 2hp
This motor replaces the two horsepower single speed energy efficient motor used on the 2HP Sta-Rite pump found on the 1989-1993 Hot Spring Highlife The "wet end" only your existing pump can be installed on this replacement motor If you require the entire ...read more -
Sku: 30217
Volute, Starite
This Sta-rite volute is the front part of the "wet end" of the 1HP and 2HP Max-E-Glas jet pumps used on the Hot Spring spa models prior to 1993 -
Sku: 30223
Impeller, 1Hp Starite
Impeller for the 1hp Sta-rite used in Hot Spring spas prior to 1993 -
Sku: 70035
Bolt, Hex Hd 3/8in-16 X 1-3/4in, Starite
Stainless steel bolt used to secure the 1HP and 2HP Sta-rite Max-E-Glas jet pump motor to the mounting bracket in the Hot Spring equipment compartment -
Sku: 70059
Bolt, #3/8in-16 X 1in Hex, Starite
Stainless steel bolt used to connect the seal plate to the electric motor on both 1HP and 2HP Sta-rite Max-E-Glas jet pumps -
Diffuser screw washer used in addition to the diffuser screw that secures the diffuser in place on the 1HP and 2HP Sta-rite Max-E-Glas jet pumps used on Hot Spring models prior to 1993
-
Sku: 70036
Diffuser Screw, #8-32 X 7/8in, Starite
Diffuser screws used to secure the diffuser in place on the 1HP and 2HP Sta-ite Max-E-Glas jet pumps used on Hot Spring models prior to 1993 -
Sku: 30219
Volute Clamp, Starite without Nut
This stainless steel volute clamp is used to bind the volute and seal plate together on all 1HP and 2HP Starite Max-E-Glas jet pumps that were used on Hot Spring spa models -
Sku: 30297
Nut, Volute Clamp, Starite
Used to tighten the volute clamp that binds the volute and seal plate together on all 1HP and 2HP Starite Max-E-Glas jet pumps that were used on some Hot Spring spa models prior to 1994 -
Sku: 70032-BYP
Seal Plate Kit, Starite- After Market
This after-market (Sta-rite) seal plate is the part of the "wet end" that bolts onto the pump motor This seal plate is the replacement for both the 1hp and 2hp Starite Max-E-Glas jet pumps used on Hot Spring models prior to 1993 Please note, the pump ...read more -
Sku: 30224
Starite Shaft Seal
Sta-rite shaft seal used on the 1HP and 2HP jet pumps that use a copper heat sink on Hot Spring spas Reference number: U109-93SS -
Sku: 70120-BYP
Impeller, 2Hp Starite
After Market replacement Sta-rite impeller for the 2Hp pumps used on the Hot Spring Highlife prior to 1992 -
Sku: 30220
Volute O-Ring, Starite
Volute O-ring used on the Sta-rite 1HP and 2HP Max-E-Glas jet pump on Hot Spring spa models prior to 1993 -
Sku: 70039
Slinger, Starite
Water slinger used on the 1HP and 2HP Sta-rite Max-E-Glas jet pump on Hot Spring spas The slinger prevents water, that may be leaking from the shaft seal, from dripping back into the windings of the electric motor and corroding that motor -
Sku: 30221
Diffuser, Starite
Sta-rite Diffuser used on the 1HP and 2HP Max-E-Glas jet pumps on Hot Spring spa models -
Sku: 30221-BYP
Diffuser, Starite- After Market
After-market Sta-rite Diffuser used on the 1HP and 2HP Max-E-Glas jet pumps on Hot Spring spa models -
This pad goes between the motor base and the plastic base buffer against noisy motor vibrations
-
Sku: 30548
Starite Compression Fitting, 1-1/2″
1-1/2" compression coupling assembly (pump union) for all Starite pumps used on Hot Spring spas
Showing 1–30 of 47 results