Description
SPAGUARD SYSTEM FLUSH removes built-up grime, lotions, body oils, skin and hair care products, and debris from the plumbing system and surface of your spa. Removing this build-up allows your spa chemistry and circulation system to operate efficiently and improves the condition of your spa water.
Directions for use: Read the entire label and use strictly in accordance with precautionary statements and directions.
1.) Use prior to draining, cleaning, and refilling your spa.
2.) Remove cartridge filter and clean with SpaGuard Filter Cleaner per label directions.
3.) Apply contents of bottle (24 oz) directly to the spa water with the pump on.
4.) Circulate water for 15 minutes.
5.) Turn pump off and completely drain spa water
6.) Clean the surface of your spa with Bioguard Off the Wall surface cleaner.
7.) Reinsert cleaned cartridge filter.
8.) Refill the spa, balance the water, and resume use.
STORAGE AND DISPOSAL: Keep this product dry in original tightly closed container when not in use. Store in a cool, dry, well-ventilated area. Keep out of reach of children and pets. Do not resuse container, but place in trash collection or offer for recycling.
PRECAUTIONARY STATEMENTS:
CAUTION: MAY CAUSE EYE AND SKIN IRRITATION. MAY BE HARMFUL IF SWALLOWED OR INHALED. Contains sodium sulfate. Avoid contact with eyes and prolonged skin contact. May be harmful if swallowed. Do not taste or swallow. May cause respiratory irritation. Avoid breathing dust. Wear safety glasses and rubber gloves when handling product. Wash thoroughly after handling.
Reference numbers: RO414; L42650BIO; 42650BIO
Leave feedback about this