Ordered from them many times before. Correct parts, good prices and always Great customer service. Will be a customer for life as long as they stay this great.On 04/01/2024 by R. R. (verified customer)
Brand: Hot Spring
Showing 31–60 of 196 results
-
Stainless steel screw used to secure the heater to the equipment compartment floor on Hot Spring & Tiger River spa models Also used on the SilentFlo 5000 Circulation pump and to hold the Ozonator to the wall of the equipment compartment -
The best way to deliver easy-to-manage, longer-lasting hot tub water is to start with the cleanest water possible This can be achieved with the new FreshWater Clean Screen pre filter This one-of-a-kind pre-filter traps organic contaminants, metals (such as ...read more -
Sku: 78415LED Light Bulb Lens Kit
This LED light bulb lens kit replaces the 78051 LED bulb kit This LED light bulb lens kit is designed for accessibility from the front (front access) on Hot Spring models beginning in 2017 For the clear plastic housing on older models, see item 74415 -
Sku: 78052LED Point of Light Harness
LED point of light harness This is the front serviceable light found behind the pillows and moto-massage area For the light bulb with lens, see item 78415 -
Sku: 74415Pillow Light, Clear Housing
This is a set of two clear lenses for the LED lights used for the underpillow lighting on 2007 to the end of 2016 Hotsprings brand spas Each of these lenses will hold one multicolor LED light for accent lighting behind the spa pillows See also ...read more -
Sku: 75103Gas Spring Lock-Uprite
The Gas Spring lock is used to secure the Uprite Lifter in the open position attaching to only one gas shock This part is typically left off when installing the Uprite Cover Lifter unless the spa is located in a windy area -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP -
Sku: 30334Screw, #4 X 1/2in Stainless Steel
Stainless steel screw used in various locations on Hot Spring, Tiger River, Solana, Hot Spot and Limelight spas -
Sku: 76035Cup Holder, Hot Spring, Warm Gray
This warm gray colored cup holder is used in place of the pop-up speakers on 2009-2013 Hot Spring spas For cool gray, see item 76036 -
This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators and is also the current replacement tubing for all Freshwater III units Note: Tubing only -
Sku: 34449Screw Cover, Teal, Dream Pillow
These are the screw covers hide the five stainless steel screws that hold the Dream Jet Pillow in place This item is for a quantity of one Five of these are used on each pillow -
This coupling is made from an ozone resistant plastic called Kynar It is connected to the side of the newest style of Freshwater III Ozonator, 72602 The ozone tubing connects onto this barbed fitting If your barbed fitting breaks off, this factory ...read more -
Sku: 34368Cap Retainer, Dream Pillow
Nylon retainer (washer) used between the stainless steel screw that secures the Dream Pillow Bladder in place on the 1995-1999 Hot Spring Landmark and the 1995-1996 Hot Spring Summit -
Sku: 36586Clip, Extruded Air Valve
Used to hold the air intake for the Freshwater II Ozonator in place on the wall in the equipment compartment near the Ozonator Found in Hotspring and Tiger River Spas with Freshwater II Ozonators -
Sku: 76078ACE Chlorine Generator Cell
This is the replacement cell for the ACE Chlorine Generator cell This cell uses electrolysis to convert salt that is dissolved in the hot tub water into usable chlorine to sanitize the spa water Once the chlorine is used up, it basically recombines into ...read more -
Sku: 77044Ace Cleaning Bottle
The cleaning bottle used to clean the Ace cartridge This bottle is the proper size to fit the Ace Chlorine Generation Cell for cleaning with vinegar or water with pH decreaser added, ie, acid The bottle is large enough for the entire cell to be submerged ...read more -
Sku: 76036Cup Holder, Hot Spring, Cool Gray
This cool gray colored cup holder is used in place of the pop-up speakers on 2009-2013 Hot Spring spas For warm gray, see item 76035 -
Sku: 74893Speakers, Oval Pop-Up (Set of 2)
These speakers are used on Hotsprings spas made from 2009 5 for use with any available sound system compatible with the 2009 5 Hotsprings spas Please use the Parts Finder to confirm this part is for your spa There are two oval-shaped cup holders ...read more -
Sku: 31399Winterizing Insulation Blanket
This radiant barrier cotton insulation blanket is designed to help keep the equipment compartment warm 24" H X 20" W X 1" Note: The old style vinyl backed fiberglass blanket is temporarily unavailable -
Sku: 76549Fibercore Replacement Kit
This Fibercor Replacement Kit can be used on all Hot Spring Spa models from 2007 to 2018 and all 2019 Limelight and Hot Spot Spa models This Kit contains approximately 8 pounds of material, which is about 4 cubic feet -
Sku: 72714Hardware Bag #2, Cover Cradle II
This Cover Cradle II hardware bag #2 includes the following: 1/4"-20 x 3/4" Stainless Steel Hex Bolts (Qty 4) #10 x 1-1/2" Stainless Steel Flat Head Screws (Qty 8) #10 x 1-1/2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware ...read more -
Sku: 76079ACE Chlorine Generator Controller
This is a component of the ACE Chlorine Saltwater water sanitizer system This controller interfaces between the control box of the hot tub, the power supply for the chlorine generator cell and the chlorine generator cell itself This system is compatible ...read more -
Sku: 74880Ace Multizone Power Supply
This is the power supply for the multizone lighting controller which controls the lighting behind the pillows, moto-massage niche as well as around the valve lever used from 2009-2012 It is also the power supply for the Ace Chlorine Generator -
Sku: 71360-BYPPower Cord, Freshwater II & III Ozone Units
Every once in awhile rodents like to nibble on various power cords in the equipment compartment This 4' long cord set is the replacement for all Freshwater 2 and Freshwater 3 ozone units Note: This cord will need to be spliced onto the power cord of your ...read more -
This is the replacement filter standpipe used in all Tiger River and Limelight Spas from 1997 to 2013 It is able to accept filter part number 71827 as well as hold a Freshwater AG+ Silver Ion Cartridge (PN 71325) inside this standpipe -
This pivot assembly is for the left side of the Cover Cradle II cover lifter as you're facing the lifter from the front This arm attaches to the side of the cover with a bracket and screws The other end attaches near the base of the spa -
Sku: 74414Pillow Light Harness
Pillow light harness -
Sku: 77401Controller, Ace
Newer style ace controller for beginning in 2015, for tubs utilizing the ACE system -
Sku: 71793Angle Bracket-Uprite
Angle bracket for Uprite cover lifter -
Sku: 74150I2 C/RS485, 5-Port Comm Hub, IQ 2020
This 5 port I2C/RS485 adapter is used to "expand" the IQ2020 Controller to allow other accessories to plug into the motherboard If you're adding on an IQ 2020® Navigator RF Remote, Music System, Luminescence Multi-Colored LED Light, etc , you'll need this ...read more
Showing 31–60 of 196 results