I have been doing business with BYP for over 20 years. They have consistently exceeded my expectations, especially in the area that means the most to me; their customer service is second to none. Fair pricing and no shenanigans. You can be confident about spending your hard earned money with this business.On 04/08/2024 by D. P. (verified customer)
Showing 31–60 of 84 results
-
Sku: 31399
Winterizing Insulation Blanket
This radiant barrier cotton insulation blanket is designed to help keep the equipment compartment warm 24" H X 20" W X 1" Note: The old style vinyl backed fiberglass blanket is temporarily unavailable -
Sku: 76549
Fibercore Replacement Kit
This Fibercor Replacement Kit can be used on all Hot Spring Spa models from 2007 to 2018 and all 2019 Limelight and Hot Spot Spa models This Kit contains approximately 8 pounds of material, which is about 4 cubic feet -
Sku: 72714
Hardware Bag #2, Cover Cradle II
This Cover Cradle II hardware bag #2 includes the following: 1/4"-20 x 3/4" Stainless Steel Hex Bolts (Qty 4) #10 x 1-1/2" Stainless Steel Flat Head Screws (Qty 8) #10 x 1-1/2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware ...read more -
Sku: 72361
Fuse, Freshwater III, 1/2A 250V FAST-BLO
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Small size fuse used in the Freshwater 3 Ozonator unit -
Sku: 71360-BYP
Power Cord, Freshwater II & III Ozone Units
Every once in awhile rodents like to nibble on various power cords in the equipment compartment This 4' long cord set is the replacement for all Freshwater 2 and Freshwater 3 ozone units Note: This cord will need to be spliced onto the power cord of your ...read more -
This pivot assembly is for the left side of the Cover Cradle II cover lifter as you're facing the lifter from the front This arm attaches to the side of the cover with a bracket and screws The other end attaches near the base of the spa
-
Sku: 71793
Angle Bracket-Uprite
Angle bracket for Uprite cover lifter -
Sku: 74150
I2 C/RS485, 5-Port Comm Hub, IQ 2020
This 5 port I2C/RS485 adapter is used to "expand" the IQ2020 Controller to allow other accessories to plug into the motherboard If you're adding on an IQ 2020® Navigator RF Remote, Music System, Luminescence Multi-Colored LED Light, etc , you'll need this ...read more -
Sku: 72572
Crosslink Assembly, Cover Cradle
The Crosslink Assembly is the large "U" shaped bar that spans from the right side pivot assembly to the left side on the Cover Cradle and the Cover Cradle II cover lifter -
This pivot assembly is for the right side of the Cover Cradle II cover lifter as you're facing the lifter from the front It attaches to one side of the cover via a bracket and screws, and the other end attaches near the bottom of the edge of the spa
-
This part attaches onto the right side of the spa cover
-
Sku: 73451
Hardware Bag #1, Uprite Cover Lifter
Bag #1 for the upright cover lifter Contains the following: 2 x 1/4 x 20 5/8" Hex Bolts 2 x 1/4 x 1" Fender Washers 2 x 2 Hold Deck Hinge 10 x #10 Washers 8 x #10 1/2" Square Panhead Self Tapping Screws 10 x #10 1 1/2" Square Pan Tapping Screws 12 ...read more -
Right side bracket (as you are facing the spa folding the cover away from you) for the Uprite cover lifter
-
Sku: 71789
Upright Side Bracket Assembly, Left Side
Left side bracket (as you are facing the spa folding the cover away from you) of the Uprite cover lifter -
Sku: 75152
Upright Extension Tube
One pair (quantity of two) of extensions for the Uprite cover lifter -
Sku: 1121801
Flip Up Black speaker
This speaker attaches to the backside of the spa cabinet and flips down behind the spa when the cover is on the spa When the cover is open, the speakers can be flipped up to provide sound directed to the users of the hot tub These speakers typically ...read more -
Sku: 75150
Uprite Channel Pivot Assembly, Left Side
This part attaches onto the left side of the spa cover -
Sku: 74099
Moonlight Music Power Supply
This is the power supply unit used to power the amplifier for the Moon Light sound system used on Hotsprings, Tiger River, and Limelight Spas It provides 12 volts DC -
Sku: 72855
Female Quick Disconnects (10)
These quick disconnects are used to adapt one male spade connector to be able to accept two female spade connectors Used a lot with the sound system installations It should not be used on higher amperage applications -
Sku: 39314
Ozone Injector, Freshwater 1
This red ozone injector is used in conjunction with the Freshwater I Ozonator It designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system -
Sku: 74776
IPod Dock Harness
iPod dock harness for spas beginning in 2009 -
Sku: 74771
IPod Header with Screw
Replacement iPod adapter for the cabinet mounted iPod dock used with some sound systems -
Sku: 74289
Wire Harness, Moonlight Sound System
This wiring harness is used to connect the JBL amplifier used in the Moon Light sound system to the power source as well as the speakers used in the sound system -
Sku: 74281
Moonlight Music Hardware Bag
Kit, Hardware Bag, Moonlight Flip-Up Speaker Mounting Hardware Includes necessary hardware to install the optional Flip-Up Speakers (Part 1121801) directly to the spa siding These speakers attach to the back, or side, of the spa cabinet and flip-down ...read more -
Sku: 73808
Ozone Restrictor, Freshwater 3
Flow restrictor for the Freshwater III ozone unit used to reduce the ozone order and/or to eliminate any "burping" noise emanating from the spa Simply remove the air filter from your Freshwater unit and attach to this flow restrictor as shown in the picture ...read more -
Sku: 72715
Hardware Bag #3, Cover Cradle II
This Cover Cradle II hardware bag #3 is only for spas with removable exterior panels and includes the following: #10 x 2" Stainless Steel Flat Head Screws (Qty 8) #10 x 2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware bag are ...read more -
Sku: 71744
Washer, Gliderite
These washers are used with the ¼” – 20 x 5/8” Hex Head Bolts & ¼” – 20 x 1” Hex Head Bolt on the Gliderite and also used on the Uprite cover lifter -
Sku: 70301
Cover Drain Grommet, Set of 2
Cover drain grommet, set of 2 -
Sku: 74770
MP3 Remote Control
This is the replacement remote control for the integrated MP3 player system that comes with the Moonlight sound system
Showing 31–60 of 84 results