Great service, great price. When it appeared the shipment might be a day or so late, there was great communication. We will definitely be back as a customer.On 07/03/2024 by G. L. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Showing 1–30 of 67 results
-
BACK IN STOCK! Newest IQ 2020 Spa Control System for most Hot Spring and Limelight spas beginning the 3rd quarter of 2012, and all Hot Spring and Limelight spa models beginning in 2013 What's included: Main control board "motherboard" and the heater ...read more$640.88 Select Options
-
This is the IQ 2020 spa control system also called "Hawk control box" made for most Hot Spot brand spas built in the 3rd quarter of 2012, and all Hot Spot models beginning in 2013 It houses the electronics and circuitry that interface the spa controls with ...read more$459.68 Select Options
-
This IQ 2020 control box is the spa control system for 2006 to 3rd quarter 2012 Hot Spot models and Solana spas beginning in 2006 Please be aware that the control panel that is compatible with this control box unit ("Cedric" system with Invensys circuitry) ...read more
-
This Gecko IN YJ 2 control box replaces the now obsolete 76091 control box used on 2003-2005 Hot Spot SX and TX wired for 115v, Solana RX 2003- 2005 and Hot Spot Spring 2010-2011 and Hot Spot Dash 2010-2012 hot tubs This entire retrofit will need the ...read more
-
Sku: 77726-BYP
Control Box, 1999-2005 Hot Spot and Solana Retrofit, Gecko IN.YJ 3 Series, 115/230 Volt, 60HZ, After-Market
The Gecko IN YJ 3 control box is part of the retrofit that replaces the discontinued S-Class control system This retrofit is for the following Hot Spot and Solana models: 1 Pump Systems Hot Spot 1999-2000 SE (Y) 1999-2002 RE (Z), RLX (Z/ZQ), SLX ...read more -
This Gecko IN YJ 3 control box used on 2022 Hot Spot Relay and Rhythm This control box is for a 2 pump system wired for 230 volts This entire retrofit will include: Specifications: 2 Pump 230v 60Hz
-
Sku: 77726-BUNDLE
Gecko IN.YJ 3 Series Complete System, 1999-2005 Hot Spot and Solana After-Market Retrofit
The Gecko IN YJ 3 Series complete system is the retrofit used on: Hot Spot 1999-2000 SE (Y); 1999-2002 RE (Z), RLX (Z/ZQ), SLX (Y/YQ); 2001-2002 SLXtra (W/WQ); 2003-2005 Sorrento (SOR/SORS), Tobago (TOB), Trinidad (TRI); 2010-2012 Dash (DAS) Solana ...read more -
This is the IQ 2020 spa control system PUG control box retrofit for international spas only (50hz) Hot Spring, Tiger River and Limelight export models Notes from manufacturer: When retrofitting Control Box or Control Panel, must also order appropriate ...read more
-
Sku: 77271-OPENBOX
Control Box, Pug, Retrofit, 60HZ (Open Box)
Replacement for the discontinued IQ 2020 (73223) that was used on all 2001-2009 5 Hot Spring, Tiger River and Limelight spas This control box is also the retrofit upgrade replacement for the discontinued IQ 2000 (71382) that was used on all 1997 Hot Spring ...read moreOpen Box Warning! Read warning -
Factory replacement control box with heater for the now obsolete 71584 control box used on the 1999-2002 Hot Spot RE, RLX, SE, SLX, and 2001-2002 SLXtra and the Solana 2000-2002 X (triangle shaped), 2003-2005 Solana RX, SX, and TX spa models Note ...read more
-
Sku: 72469
Control Box, Hot Spot
Factory replacement control box for the 2003-2005 Hot Spot Mallorca, Sorrento, Trinidad & Tobago, and the 2002-2005 Caldera Oasis I & Oasis II spa models -
Sku: 37335
Control Box, Hot Spot
Factory original control box found on the 1998 Hot Spot RE, RLX, SE, SLX, and SLXtra spa models It comes complete with the circuit board, GFCI, electronic t-stat, high limit thermistor, relays, and heavy-duty power cord -
This jumper is used to bypass the pressure switch on the 2002-forward IQ 2020 spa control system The PDR Titanium Replacement Heater has its own automatic cut-off in the event of a low flow condition thus negating the need for a pressure switch After ...read more
-
Replaces the obsolete 39525 and obsolete 39204 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 ...read more
-
Sku: 79006
Thermistor, Control Thermostat, Watkins No Fault Heater, Hot Spring, Tiger River and Limelight
Replaces the obsolete 39530 and obsolete 39205 Newly designed and includes o-ring This control thermistor is a safety device that measures the water temperature of your spa and communicates that temperature reading to the Motherboard It simply screws ...read more -
Replaces 38415 Newly designed and includes o-ring This control thermostat thermistor sensor detects the spa waters temperature and relays that information back to the system It simply screws into the No Fault Heater Housing (hand tight only) and plugs ...read more
-
Replaces 38416 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F It simply screws ...read more
-
This newly designed high limit thermistor replaces the original black plastic-tipped version It is a safety device that will shut down power to the spa if the water temperature exiting the heater is too hot This would indicate a "low water flow" condition ...read more
-
This Control Thermostat Thermistor communicates the actual water temperature to the controller (control box motherboard) to shut off the heater when the spa reaches the target temperature It is used on all 73859, 72469, 76840 and 76091 control boxes
-
Sku: 34-01395-K
Thermistor, Control & Hi-Limit Sensor Kit, After Market
The after-market thermistor kit (1 control and 1 hi-limit sensor included with o-rings as well as adapters) that fit with either the 4kW or 6kW after-market PDR Titanium double-barrel heater These sensors can plug in directly to the motherboard located ...read more -
Sku: 30-01395-K
Thermistor Adapters, After-Market
The after-market thermistor adapters work to allow the after-market thermistors to connect to the outside of the control box instead of connecting directly to the motherboard of the control box -
This Hot Spot heater electronic pressure switch is a safety device that will shut down the heater if a "low water flow" condition occurs It is used on Hot Spot models (except Sprint & Dash models) and Solana spa models Some symptoms of failure include ...read more
-
Sku: 30208
Hi-Limit, Spa, 120 Degree, Hot Spring
This Spa Hi-Limit thermostat (aka spa reset or tub reset) is a safety device designed to prevent damage to the spa that would occur if the spa overheated The probe of this high-limit resides in a "drywell" along with the thermostat probe The spa high-limit ...read more -
This after-market heater pressure switch (looks like a radiator thermostat) is a safety device that screws into the heater that will shut down the heater if a "low water flow" condition occurs It is used on all 1999-2005 Hot Spot spa models as well as all ...read more
-
This Hot Spot heater pressure switch (looks like a radiator thermostat) is a safety device that screws into the heater that will shut down the heater if a "low water flow" condition occurs It is used on all 1999-2005 Hot Spot spa models as well as all ...read more
-
This is the replacement thermistor for the 1999-2002 Hot Spot RE, RLX, SE, SLX, and the 2001-2002 SLXtra (wood-sided) spa models Also the Solana 2000-2002 X, 2003-2005 RX, SX, and TX models This thermistor communicates the actual water temperature to the ...read more
-
This is the after-market replacement thermistor for the 1999-2002 Hot Spot RE, RLX, SE, SLX, and the 2001-2002 SLXtra (wood-sided) spa models Also the Solana 2000-2002 X, 2003-2005 RX, SX, and TX models This thermistor communicates the actual water ...read more
-
Sku: 36044
Plug, Hole, 0.50
This plug is used to fill openings found on the back of the IQ2000 and IQ2020 Control box that can be used to allow wiring to enter the control box These plugs cover the openings that are not in use to help prevent dust, dirt, and insects from entering the ...read more -
This pressure switch is a safety device that screws into the heater and connects to the control box's main circuit board The main circuit board (motherboard) will shut down the heater if a "low water flow" condition occurs as monitored by this pressure ...read more
-
Sku: 36043
Control Box Plug, for 0.875 Hole
Black plastic plug used on the IQ 2000 and IQ 2020 Control Boxes to seal off an unused port helping to prevent bugs, dirt and debris from making a home inside the control box
Showing 1–30 of 67 results