I’ve used Backyard plus many times and they are incredibly friendly and helpful. Shoutout to Craig!On 03/21/2024 by N. C. (verified customer)
Showing 61–90 of 104 results
-
Sku: 71965
Threaded Insert (Qty-6)
These threaded inserts are used on the equipment door of the Solana TX in the years 2000-2010 These screws are mounted on the frame of the spa and accept the stainless steel screws that are used to secure the equipment door in place -
Sku: 36018
IQ Control Box Bracket
This aluminum bracket attaches to the spa door frame to enable the IQ Control Box to mount securely to this bracket The bracket does not come with the two 36898 screws that attach it to the control box Simple wood screws are used to attach it to the wood ...read more -
This screw was used to hold the thermostat knob in place on the topside control panel used on Tiger River spas from 1992 to 1994 and the round-shaped air control knob on air valves used on Hotspring spas from 1989 to 1993 5
-
Sku: 30120
Lug, Grounding
Used on various components in the equipment compartment to provide a place for the grounding wire to attach to -
Sku: 30105
Romex Clamp 3/4in
This clamp is used as strain relief is used to secure the heater's power cord to the bottom of the IQ Control box The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down -
Sku: 73451
Hardware Bag #1, Uprite Cover Lifter
Bag #1 for the upright cover lifter Contains the following: 2 x 1/4 x 20 5/8" Hex Bolts 2 x 1/4 x 1" Fender Washers 2 x 2 Hold Deck Hinge 10 x #10 Washers 8 x #10 1/2" Square Panhead Self Tapping Screws 10 x #10 1 1/2" Square Pan Tapping Screws 12 ...read more -
Sku: 39281
Screw, Hot Spot Door, Cream
This screw is used on Hot Spot spas from 1998 to 2010 It is a stainless steel Phillips head screw with a pan head that has been painted to match the color of the skirting and door of the spa -
Sku: 72855
Female Quick Disconnects (10)
These quick disconnects are used to adapt one male spade connector to be able to accept two female spade connectors Used a lot with the sound system installations It should not be used on higher amperage applications -
Sku: 73256
Clarion Brackets
These brackets are used to mount the Clarion Light Bars to the spa or step or where ever desired Five sets of left and right pairs are included in each pack -
Sku: 72715
Hardware Bag #3, Cover Cradle II
This Cover Cradle II hardware bag #3 is only for spas with removable exterior panels and includes the following: #10 x 2" Stainless Steel Flat Head Screws (Qty 8) #10 x 2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware bag are ...read more -
Sku: 37752
Wing Nut,10-24 Stainless Steel
This wing nut is used to hold the bulb clamp in place on the heater body in Tiger River spas from 1992 to 1994 The bulb clamp holds the copper thermostat and hi-limit bulbs to the side of the heater where they are used to monitor the temperature of the spa ...read more -
Sku: 33275
O-Ring, Control Panel .07 X .07
These o-rings used on 1992 to 1997 Tiger River control panels, fit around the posts on which the buttons for the jets and lights glide up and down The o-rings serve as pads to soften the stop of the button when it is pushed all the way down -
Sku: 33138
Spring, Control Panel 1/8in X 1-1/4in
Spring used on the button on Tiger River Control Panels from 1992-1994 This spring resides behind the button to help the button rebound after being pressed to activate the jets or lights -
Sku: 33132
Push on Retainer, .094
Push on retainer, 094 -
Heavy-duty 12 gauge insulated power cord with a 90-degree three-pronged plug on the end found only on Hot Spot and Tiger River spa models that had the GFCI mounted in the control box and not on the end of the power cord
-
Sku: 31560
Screw, #6-32 X 5/8in
This screw is used to hold the standoff in place in the control box for the main circuit board as well for holding the circuit board to the standoff on 1992-1994 Tiger River spas -
Sku: 30360
Screw, 10 X 1/2in Stainless Steel
This screw used to mount bracket for Navigator Remote Control -
6 of these screws are used in the jet selector valve/diverter valve for pre-1994 Hotsprings and Tiger River spas to hold the valve kit ( 20339 ) into the valve body (30502 ) These screws are included in the valve kit
-
This screw is used to hold in place the standoffs (35087) that secure the thermostat board (71340)to the topside control panel in Tiger River spas made from 1995 to 1997
-
Sku: 300859
Nut, 2.5mm
This nut is used to secure the circuit board to the back of the control panel bezel on Tiger River spas from 1992-1997 It replaces a small spring clamp that used to do the same job The posts that the nut screws on to are actually plastic and are not ...read more -
Sku: 33366
Screw, #8-32 X 3/8in Hex Washer-Hd
The screw used on the Freshwater II Ozonator -
Two of these screws are used to hold the thermostat in place to the circuit board on the topside control panel for Tiger River spas from 1992 to 1994
-
Sku: 34009
Screw, Control Panel, Tiger River
This screw is used to mount Tiger River control panels to the shell of the spa on the bar top It secures a flip-out tab that clamps the control panel to the shell from the backside of the shell It was used on all models from 1992-1997 -
Sku: 78817
Plastic Panel Clip
Plastic Panel Clip for Limelight beginning in 2019 -
Siding screw, stainless steel with gray finish for Hot Spot 2019 and Limelight 2019 302637- Stainless Steel 302637-1- Gray 302637-2- Espresso 302637-3- Teak 302637-4- Charcoal 302637-5- Sable 302637-6- Dark Espresso 302637-10- Brown
-
Siding screw, stainless steel with espresso finish for Hot Spot 2019 and Limelight 2019 302637- Stainless Steel 302637-1- Gray 302637-2- Espresso 302637-3- Teak 302637-4- Charcoal 302637-5- Sable 302637-6- Dark Espresso 302637-10- Brown
-
Siding screw, stainless steel with teak finish for Hot Spot 2019 and Limelight 2019 302637- Stainless Steel 302637-1- Gray 302637-2- Espresso 302637-3- Teak 302637-4- Charcoal 302637-5- Sable 302637-6- Dark Espresso 302637-10- Brown
-
Sku: 75105
Hardware Bag #4 for Upright Cover Lifter
Hardware for the upright spa cover lifter -
This diffuser lock washer is used with the screws and nuts that belong to heater 20286 50-BYP and 20286 75-BYP
-
Sku: 56WUA500-V
Wavemaster 9000/9200, 8000/8200 Volute O-Ring
LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 56-frame LX wet ends item 77713 and 77712
Showing 61–90 of 104 results