Very easy to work with. It got here on time very. GoodOn 10/09/2023 by L. C. (verified customer)
Showing 151–180 of 391 results
-
This stainless steel screw secures the diffuser to the seal plate on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump
-
Bolt that secures the suction flange onto the front of the Wavemaster 7000 (v 1)
-
Universal Bushing, 0 875 inch, found in Hot Spot Control Box Assembly (37335) This Bushing protects the Electronic T-Stat (75089) from the metal control box housing This part can be found on the 1998 Hot Spot models
-
Sku: 37752
Wing Nut,10-24 Stainless Steel
This wing nut is used to hold the bulb clamp in place on the heater body in Tiger River spas from 1992 to 1994 The bulb clamp holds the copper thermostat and hi-limit bulbs to the side of the heater where they are used to monitor the temperature of the spa ...read more -
Phillip head stainless steel screw, 8-18 x 3/8in for control panels on Hot Spring models 1994-1997
-
Sku: 34182
Gasket, Silicone Jet 2-1/2in
Red silicone gasket (rubber gaskets dissolve in chlorinated water) fits behind the wall fitting nut and the spa shell on the 1993-1994 Hot Spot Z model spa and is used on the jet assembly on the 1995-1999 Hot Spring Dream Pillow Jet -
Sku: 33368
Screw, 10-32 x 3/8in
This screw is used on Hotsprings Spas made from 1994 to 1996 to hold the plastic stand-off in place on the mounting plate from behind This stand-off accepts the screws from the front of the control panel that are used to hold the control panel in place -
Sku: 33275
O-Ring, Control Panel .07 X .07
These o-rings used on 1992 to 1997 Tiger River control panels, fit around the posts on which the buttons for the jets and lights glide up and down The o-rings serve as pads to soften the stop of the button when it is pushed all the way down -
Sku: 33253
Nut, Speed Narrow
Nut, speed narrow -
Sku: 33138
Spring, Control Panel 1/8in X 1-1/4in
Spring used on the button on Tiger River Control Panels from 1992-1994 This spring resides behind the button to help the button rebound after being pressed to activate the jets or lights -
Sku: 33132
Push on Retainer, .094
Push on retainer, 094 -
Heavy-duty 12 gauge insulated power cord with a 90-degree three-pronged plug on the end found only on Hot Spot and Tiger River spa models that had the GFCI mounted in the control box and not on the end of the power cord
-
Hex bolt, 1/4in-20 x 1-1/2in stainless steel
-
Sku: 32748
Lag Bolt 3in
3in lag bolt -
Sku: 32736
Nut, Lock 1/4in (Thin)
1/4in lock nut -
Sku: 31560
Screw, #6-32 X 5/8in
This screw is used to hold the standoff in place in the control box for the main circuit board as well for holding the circuit board to the standoff on 1992-1994 Tiger River spas -
Knob spring, for the rear side of the control panel, found on Hot Spring models from 1994-1997
-
Sku: 30377
Screw, Nylon #6-32 X 1/4in
Nylon screw, #6-21 x 1/4in -
Sku: 30369
Screw, #6 X 5/8in Stainless Steel
Stainless steel screw, #6 x 5/8in, for the control panel on Hot Spring Models from 1989-1993 -
Sku: 30361
Screw, Metal #10 X 3/4in
Metal screw, #10 x 3/4in, found on the control panel of Hot Spring models from 1989-1993 -
Sku: 30360
Screw, 10 X 1/2in Stainless Steel
This screw used to mount bracket for Navigator Remote Control -
Nylon pan head slotted screw 10-24 x 1 1/2in
-
6 of these screws are used in the jet selector valve/diverter valve for pre-1994 Hotsprings and Tiger River spas to hold the valve kit ( 20339 ) into the valve body (30502 ) These screws are included in the valve kit
-
Sku: 30335
Screw, #6 X 1/2in Stainless Steel
Stainless steel screw, #6 x 1/2In -
Sku: 30332
Screw, #6-32 X 3/8in Stainless Steel
Stainless steel screw, #6-32 x 3/8in -
This screw is used to hold in place the standoffs (35087) that secure the thermostat board (71340)to the topside control panel in Tiger River spas made from 1995 to 1997
-
Sku: 30102
Bushing, Snap 3/8in Outside Diameter
This bushing is used around openings through the control box used on pre-1997 Hot Springs spas where the copper tubes for the temperature probes and the cable for the spa power on light pass through -
Sku: 300859
Nut, 2.5mm
This nut is used to secure the circuit board to the back of the control panel bezel on Tiger River spas from 1992-1997 It replaces a small spring clamp that used to do the same job The posts that the nut screws on to are actually plastic and are not ...read more -
Sku: 20355
Timer Standoff,with Screw
Timer standoff with a screw -
Sku: 20033
Hinge, 7in Ivory
Door Hinge on Pre-1989 Hot Spring Grandee Spas
Showing 151–180 of 391 results