PLUMBING

Find all the plumbing parts you need here. Flexi PVC tubing, Vinyl Tubing, Elbows, Tees, Diverter Valves, Levers & Bezels, Check-Valves, Couplers, and more.

Brand: Hot Spring | Plumbing: Bleedline Adapter, Collar, Reducer, Restrictor, Tubing

Showing 1–30 of 36 results

  • Vinyl Tubing, Thick Walled, 3/8in Inside Diameter x 36in
    3/8" inside diameter (ID) by 36" long section of specially made thick-walled, clear vinyl tubing This thick-walled tubing will stand up to the harsh chlorinated spa environment for years to come Measures 3/8" ID; 9/16" OD Uses 34465 spring clamp 3/4" ...read more
    $7.95
    Add to cart
  • Tubing Kit, Del-Ozone-1/4in with Check valve
    This 1/4" ID (3/8" OD)  ozone-resistant tubing works with UO3 ozone generator It includes an attached 1/4" ozone-resistant check valve, clamps, mounting screws, and new flag terminals This assembly is approx five feet in length Note: There is a small ...read more
    $20.12 View OEM
    Add to cart
  • Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar with Check valve
    This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators It is the replacement for all Freshwater 3 ozonators It includes an attached 1/4" ozone-resistant check valve This assembly is approx six feet ...read more
    $55.00 View Generic
    Add to cart
  • Diverter Valve Retainer and Retrofit, Hot Spring and Tiger River
    This valve retainer (sometimes called sleeve) is used as a retrofit to update the base of the Smart Jet on the 1998 Hot Spring and Tiger River spa models This will allow the replacement valve levers and bezels to fit since the 1998 valve lever and bezel are ...read more
    $32.03
    Add to cart
  • Bleedline Nipple, 1/4in, Hot Spring
    This nipple is glued into various PVC fittings in various places on Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Simply drill out the broken 1/4" barbed fitting with a 19/64" drill bit (only this size drill bit) Then glue this ...read more
    $2.14
    Add to cart
  • Collar, Diverter Valve
    The collar is a fitting that is placed through the bar top of the spa shell and is connected to the diverter valve body
    $9.44
    Add to cart
  • Flexible PVC, 3/4in Inside Dimension X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware store The diameter is measured from the inside (I D ) of the piping Note: This is ...read more
    $13.18
    Add to cart
  • Flexible PVC, 2in inside Diamter X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC This size is usually found coming off of the jet pump or water diverter valves (Smart Jet) It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware ...read more
    $32.85
    Add to cart
  • Bleedline Fitting, Circulation Pump
    Circulation Pump Bleedline Fitting   This special Tee fitting includes 2 X 3/4" barbed fittings, as well as a 1/4" connection   No PVC Glue needed and no assembly required like the 72727-BYP (Elbow, 3/4in X 3/4in Barbed with 1/4in Barbed Nipple)
    $11.10 View Generic
    Add to cart
  • Flexible PVC, 1/2" inside Diameter X 3ft
    Flexible pvc is a ribbed looking white or beige type of pvc It comes in three foot sections and is glued using pvc primer and pvc cement found at your local hardware store The diameter is measure from the inside (I D ) of the piping Note: This is ...read more
    $11.66
    Add to cart
  • Flexible PVC,1-1/2in Inside Diameter X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC This size is usually found coming off of the jet pump or water diverter valves (Smart Jet) It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware ...read more
    $28.35
    Add to cart
  • Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar
    This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators and is also the current replacement tubing for all Freshwater III units   Note:  Tubing only
    $41.58
    Add to cart
  • Flexible PVC, 1in Inside Diameter X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware store The diameter is measured from the inside (I D ) of the piping Note: This is ...read more
    $12.64
    Add to cart
  • Diverter Valve Wallfitting Nut
    This cool gray color collar is used to secure the on/off valve to the shell of the spa in Hotspring and Tiger River spa models that have the  Bella Fontana, Amur, or Soothing Stream water features made beginning in 2004
    $24.52
    Add to cart
  • Manifold, Flow Cone
    Reducer Bushing, 3/4" Spig x 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 3/4" female slip fitting   The connection should be made using PVC primer and cement
    $3.25
    Add to cart
  • Flexible PVC,1-1/4in Inside Diameter X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware store The diameter is measure from the inside (I D ) of the piping
    $12.59
    Add to cart
  • Collar, On and Off Valve
    This collar is used for the on/off valve for the fountain on Hot Springs spas    This collar is used to attach the valve to the bar top of the spa and is held in place by a plastic nut
    $8.68
    Add to cart
  • Reducer, 2in X 1-1/2in Spig X Slip
    Reducer Bushing, 2" Spig x 1-1/2" Slip   This bushing allows for a 1 1/2" male slip fitting or PVC pipe, rigid or flexible, to connect to a 2" female slip fitting   The connection should be made using PVC primer and cement
    $5.95
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Reducing Bushing, 1"Spig X 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Reducer Bushing, 1" Spig x 3/4" Slip   This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Elbow, 3/4in Poly Barbed
    This adapter is used to join a 3/4" PVC male fitting and a 1" PVC male fitting together   PVC primer and cement should be used to adhere the fittings
    $5.46
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Reducer Bushing, 2" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 2" female slip fitting   The connection should be made using PVC primer and cement
    $6.87
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Bleedline Bushing for 2001 Hot Spring Landmark Dream Jet Massage Plumbing System   Fits between the spa shell and the bleedline fitting, part number 30598 The bleedline fitting supplies a small stream of water behind the pillow to prevent water from ...read more
    $9.83
    Add to cart
  • Ozone Restrictor, Freshwater 3
    Flow restrictor for the Freshwater III ozone unit used to reduce the ozone order and/or to eliminate any "burping" noise emanating from the spa Simply remove the air filter from your Freshwater unit and attach to this flow restrictor as shown in the picture ...read more
    $75.82
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing 1-1/2" Spig x 3/4 female iron pipe thread   This bushing allows a 3/4" male pipe threaded fitting to be adapted to fit in a 1 1/2" female slip fitting   The connection should be made using PVC primer and cement on the slip portion of the ...read more
    $7.18
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1-1/2" Spig x 1-1/4" Slip  This bushing reduces a 1 1/2" female slip fitting down to a 1 1/4" female slip fitting   PVC primer and cement should be used to glue the bushing in place
    $4.97
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1-1/4" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1 1/4" female slip fitting   The connection should be made using PVC primer and cement
    $5.05
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This is a PVC coupler that allows two PVC pipes to be joined together using PVC primer and cement   One side of the coupler accepts a 1/2" PVC pipe, either rigid or flexible, and the other side accepts a 3/4" PVC pipe, either rigid or flexible
    $3.83
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1/2" Spig x 3/8" Slip This bushing allows a 3/8" male slip fitting or 3/8" PVC or vinyl pipe, rigid or flexible, to be adapted to fit in a 1/2" female slip fitting   The connection should be made using PVC primer and cement
    $3.31
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer coupling, 2 X 1 5
    $6.80
    Add to cart

Showing 1–30 of 36 results