PLUMBING

Find all the plumbing parts you need here. Flexi PVC tubing, Vinyl Tubing, Elbows, Tees, Diverter Valves, Levers & Bezels, Check-Valves, Couplers, and more.

Plumbing: Bushing, Compression Fitting, Plug

Showing 1–30 of 44 results

  • Compression Fitting O-rings, for 2 inch Union (Qty of 2)
    Sku: 34447-x2-BYP

    Compression Fitting O-rings, for 2 inch Union (Qty of 2)

    (Quantity of 2 o-rings) O-rings used on the pumps 2" compression fittings ( 71036 ) found on most Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Also used on the replacement "Wet End" pump kits and some heaters The 2" measurement refers ...read more
    $3.42
    Add to cart
  • Compression Fitting O-ring, for 2 inch Union
    Sku: 34447

    Compression Fitting O-ring, for 2 inch Union

    O-ring used on the 2" compression fittings (71036) on most Hot Spring, Tiger River, Hot Spot, and Solana spa models The 2" measurement refers to the inner diameter of the most narrow part of the compression fitting/union The o-ring that is included measures ...read more
    $1.80
    Add to cart
  • Compression Fitting, 2in with O-Ring
    Sku: 71036

    Compression Fitting, 2in with O-Ring

    This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more
    $12.99
    Add to cart
  • Compression Fitting O-ring, for 1-1/2 inch Union
    Sku: 30237-x2-BYP

    Compression Fitting O-ring, for 1-1/2 inch Union (Qty. of 2)

    1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps   This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump   No Teflon tape is needed for the jet pump ...read more
    $6.36
    Add to cart
  • Compression Fitting O-ring, for 1-1/2 inch Union
    Sku: 30237

    Compression Fitting O-ring, for 1-1/2 inch Union

    1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps   This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump   No Teflon tape is needed for the jet pump ...read more
    $3.26
    Add to cart
  • Compression Fitting, 1-1/2in with O-Ring
    Sku: 71038

    Compression Fitting, 1-1/2in with O-Ring

    This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more
    $9.86
    Add to cart
  • Manifold, Flow Cone
    Sku: 71037

    Compression Fitting, 2in X 1-1/2in with O-Ring

    This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling 1-1/2" Compression Fitting 2" Compression Fitting
    $12.78
    Add to cart
  • Drain Plug, Wavemaster
    Sku: 32267-1

    Drain Plug, Wavemaster

    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    Sku: 38398

    Manifold Plug, 3/4in Slip X 1/4in closed nipple

    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart
  • 449-020 2in Plug
    Sku: 11080

    449-020 2in Plug

    This is a 2" PVC plug   It can be used to plug any 2" female PVC fitting and should be installed using PVC primer and cement   You can get PVC cement at your local hardware store
    $4.69
    Add to cart
  • Compression Fitting Split Nut, Heater, 2in
    Sku: 33761

    Compression Fitting Split Nut, Heater, 2in

    This replacement compression fitting split nut (AKA Split Union Nut-2") is used to connect heaters on the 1993-1994 Hot Spot Z, all 1998-current Hot Spot models, Solana models beginning in 2000 and all 1992-1994 Tiger River spas It is designed in two half ...read more
    $8.86
    Add to cart
  • Manifold, Flow Cone
    Sku: 30675

    Reducer Bushing, 3/4in – 1/2in Spig X Slip

    Reducer Bushing, 3/4" Spig x 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 3/4" female slip fitting   The connection should be made using PVC primer and cement
    $3.25
    Add to cart
  • Manifold, Flow Cone
    Sku: 30548

    Starite Compression Fitting, 1-1/2″

    1-1/2" compression coupling assembly (pump union) for all Starite pumps used on Hot Spring spas
    $62.52
    Add to cart
  • Manifold, Flow Cone
    Sku: 30681

    Bushing, 1-1/2in X 1in Sp X Slip

    This bushing is used to adapt a 1" male PVC slip fitting to fit in a 1 1/2" female slip fitting, or to allow a 1 1/2" female slip fitting to accept a 1" male slip fitting
    $2.99
    Add to cart
  • Compression Fitting with Check Valve, Tiger River
    Sku: 71368

    Compression Fitting with Check Valve, Tiger River

    This compression fitting (aka pump union, quick disconnect, coupling) is used on the discharge side of the Tiger River Wavemaster Pumps to ensure that the small Silentflo 5000 or 5002 circulation pump pulls water through the filter when the jet pump is off ...read more
    $48.62
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Sku: 30697

    Plug, 3/4in Spig

    Plug, PVC, 3/4" Spig   This plug is made out of PVC and fits in a female PVC slip fitting   It can be used to plug an extra port on a manifold or tee that is not needed   Or cap off a piece of plumbing that is no longer used
    $5.05
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Sku: 30676

    Bushing, Reducer, 1in X 1/2in Spig X Slip

    Reducing Bushing, 1"Spig X 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Sku: 71387

    Fitting, Comp 45 Degree with O-Ring

    This is a 2" pump union with a 45 degree offset street fitting   It is used to connect the jet pump to the plumbing of the spa and allows the plumbing to come towards the pump from a 45-degree angle   It glues into a 2" female PVC slip fitting using PVC ...read more
    $16.60
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Sku: 31420

    Bushing, 1-1/2in X 3/4in Slip X Slip

    This bushing accepts a 3/4" male PVC slip fitting or 3/4" PVC pipe, rigid or flexible, and will connect to a 1 1/2" female PVC slip fitting
    $5.64
    Add to cart
  • Bushing, 1-1/2in X 3/4in Sp X Slip
    Sku: 30680

    Bushing, 1-1/2in X 3/4in Sp X Slip

    This bushing accepts a 3/4" male PVC slip fitting and will fit into a 1 1/2" female PVC slip fitting   PVC primer and cement should be used to adhere this fitting
    $2.99
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Sku: 30677

    Bushing, Reducer, 1in X 3/4in Spig X Slip

    Reducer Bushing, 1" Spig x 3/4" Slip   This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Sku: 30685

    Bushing, 2in X 1in Spig X Slip

    This bushing accepts a 1" male PVC slip fitting and will fit into a 2" female PVC slip fitting   PVC primer and cement should be used to adhere to this fitting
    $6.87
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Sku: 37681

    Red Bushing, 2in X 3/4in (437-248)

    Reducer Bushing, 2" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 2" female slip fitting   The connection should be made using PVC primer and cement
    $6.87
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Sku: 74135

    Bleedline Bushing, Hot Spring

    Bleedline Bushing for 2001 Hot Spring Landmark Dream Jet Massage Plumbing System   Fits between the spa shell and the bleedline fitting, part number 30598 The bleedline fitting supplies a small stream of water behind the pillow to prevent water from ...read more
    $9.83
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Sku: 31485

    Bushing, 1-1/4in X 1in

    This bushing accepts a 1" pipe or male PVC fitting and will fit into a 1 1/4" female PVC fitting   PVC primer and cement should be used to adhere the fittings together
    $3.81
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Sku: 30699

    Plug, 1-1/2in Spig

    This PVC fitting is used to plug 1 1/2" female PVC slip fittings   It should be attached using PVC primer and cement, which is available at your local hardware store   It is made out of white PVC plastic
    $14.63
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Sku: 30698

    Plug, 1in Spig

    This is a 1" PVC plug   It is used to plug a 1" female PVC fitting and should be attached using PVC cement and PVC primer   This will usually be used when a fitting has multiple openings, and not all of the openings are being used
    $5.74
    Add to cart
  • Plug 1/2in Spig
    Sku: 30696

    Plug 1/2in Spig

    Plug, PVC, 1/2" Spig
    $5.54
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Sku: 30689

    Bushing, 2in X 1/2in Spigot (Spig) X Female Iron Pipe Threaded (Fipt)

    This bushing accepts a 1/2" male pipe thread fitting and will connect to a 2" female PVC slip fitting   PVC primer and cement should be used for the slip fitting side of this bushing   Plumbers tape should be used on the 1/2" male pipe thread before it is ...read more
    $11.54
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Sku: 30688

    Bushing, Reducer, 1-1/2in X 3/4in Threaded

    Reducer Bushing 1-1/2" Spig x 3/4 female iron pipe thread   This bushing allows a 3/4" male pipe threaded fitting to be adapted to fit in a 1 1/2" female slip fitting   The connection should be made using PVC primer and cement on the slip portion of the ...read more
    $7.18
    Add to cart

Showing 1–30 of 44 results