PLUMBING

Showing 31–60 of 596 results

  • Compression Fitting, 2in with O-Ring
    Sku: 71036

    Compression Fitting, 2in with O-Ring

    This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more
    $12.99
    Add to cart
  • Compression Fitting O-ring, for 1-1/2 inch Union
    Sku: 30237-x2-BYP

    Compression Fitting O-ring, for 1-1/2 inch Union (Qty. of 2)

    1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps   This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump   No Teflon tape is needed for the jet pump ...read more
    $6.36
    Add to cart
  • Compression Fitting O-ring, for 1-1/2 inch Union
    Sku: 30237

    Compression Fitting O-ring, for 1-1/2 inch Union

    1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps   This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump   No Teflon tape is needed for the jet pump ...read more
    $3.26
    Add to cart
  • Compression Fitting, 1-1/2in with O-Ring
    Sku: 71038

    Compression Fitting, 1-1/2in with O-Ring

    This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more
    $9.86
    Add to cart
  • Manifold, Flow Cone
    Sku: 71037

    Compression Fitting, 2in X 1-1/2in with O-Ring

    This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling 1-1/2" Compression Fitting 2" Compression Fitting
    $12.78
    Add to cart
  • Drain Plug, Wavemaster
    Sku: 32267-1

    Drain Plug, Wavemaster

    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Sweep Pump Union, 2in Soc. 90 Degree
    Sku: 301488

    Sweep Pump Union, 2in Soc. 90 Degree

    Two-inch SOC 90deg sweep pump union
    $11.07
    Add to cart
  • Pump Union, 45 Degree
    Sku: 1119401

    Pump Union, 45 Degree

    Pump union (aka compression fitting) can be used to connect to any Wavemaster pump later than 1996   This union accepts a 2" PVC pipe and will attach to a 2" standard pump thread   The fitting for the pipe is at a 45-degree angle
    $10.09
    Add to cart
  • Silicone Grease, 1 oz. Tube
    Sku: ML-1OZ-BYP

    Silicone Grease, 1 oz. Tube

    Silicone grease ideal for lubricating o-rings
    $5.34
    Add to cart
  • Check Valve, Air, with Ball 1/2in
    Sku: 38390

    Check Valve, Air, with Ball 1/2in

    It is used to prevent water from backing into the airlines when the jets are off It is at the back of the Moto-Massage housing and glued into a 90-degree elbow It is also on the jetstream jets
    $1.74
    Add to cart
  • Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.
    Sku: 1044101

    Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.

    Over time an Ozonator check valve will breakdown under the harsh conditions of ozone Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber Rubber diaphragms last about a month before the rubber becomes hard
    $19.53
    Notice: Undefined property: stdClass::$mandatoryoptions in /var/www/vhosts/backyardplus.com/httpdocs/wp-content/plugins/byp/front/theme.php on line 1380
    Add to cart
  • Spring Clamp, 1/2in
    Sku: 31228

    Spring Clamp, 1/2in

    1/2" spring clamp for securing 1/2" ID vinyl tubing (70316) to components Item 70316 has an inner diameter of 1/2" and an outer diameter of 3/4" This clamp fits the 3/4" OD Note: Wear eye protection when squeezing these little rascals Service techs ...read more
    $1.19
    Add to cart
  • Split Nut for 2in Compression Fittings, Heavy Duty
    Sku: 72072

    Split Nut for 2in Compression Fittings, Heavy Duty

    This heavy-duty fiberglass-reinforced polymer split nut comes in two pieces and is designed to replace compression fitting nuts (aka pump union nuts) that have broken due to vibration, age and finally over-tightening The two halves of this fitting are held ...read more
    $19.10
    Add to cart
  • Screw, 8-16 X 1/2in
    Sku: 33850

    Screw, 8-16 X 1/2in

    This screw is used on various air controls and water diverter valve levers & bezels
    $1.28
    Add to cart
  • Precision Jet Tee
    Sku: 36160

    Precision Jet Tee

    This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee This tee is not available at the local hardware store
    $14.43
    Add to cart
  • Coupling, Barbed, 1/4in x 1/4in
    Sku: 70382

    Coupling, Barbed, 1/4in x 1/4in

    Barbed coupling used to splice together 1/4" vinyl tubing
    $3.92
    Add to cart
  • Spring Clamp, 3/8in
    Sku: 34465

    Spring Clamp, 3/8in

    3/8" spring clamp (aka wire clamp) is used to secure the 3/8 inch vinyl tubing 70317 (9/16" OD) to various components Note: Wear eye protection when squeezing these little rascals Service techs typically use either needle-nose pliers are hose clamp ...read more
    $1.27
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    Sku: 38398

    Manifold Plug, 3/4in Slip X 1/4in closed nipple

    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart
  • Adapter, 3/4in Barbed X 3/4in Slip
    Sku: 31417

    Adapter, 3/4in Barbed X 3/4in Slip

    This barbed fitting is primarily used to connect 3/4" vinyl tubing to various places within the circulating/heating system of Hot Spring & Tiger River from 1990 forward This PVC fitting is often found glued into a 90-degree elbow rising from the floor of ...read more
    $1.74
    Add to cart
  • Diverter Body, 2-Port
    Sku: 37704

    Diverter Body, 2-Port

    This is a replacement valve body for 1994-2008 Hot Spring, Tiger River and all Limelight spa models with two-port diverter valves This valve body has 2" diameter ports and replaces the original black valve body
    $30.05
    Add to cart
  • 6 Port Diverter Valve Body
    Sku: 37297

    6 Port Diverter Valve Body

    This 6 port diverter valve body is used on the Hot Spring and Tiger River spa models that utilize a four-position valve
    $46.00
    Add to cart
  • O-ring, Large, Diverter Valve (Smart Jet Valve)
    Sku: 34318

    O-ring, Large, Diverter Valve (Smart Jet Valve)

    This is the large o-ring found on all water diverter valves beginning in 1994 (Smart Jet Valve) Typically, by the time this o-ring needs to be replaced the entire valve needs to be replaced The valves will warp and/or score with debris over time making the ...read more
    $1.95
    Add to cart
  • Water Feature On-Off Valve Assembly
    Sku: 73920

    Water Feature On-Off Valve Assembly

    This on-off valve assembly is found on Hot Spot and Limelight spa models from 2006 through 2014 It is used to turn on and off the bar top Amur water feature that runs off one of the jet pumps in the spa This valve turns 270 degrees, for 2014 tubs, please ...read more
    $51.30
    Add to cart
  • O-ring, Small, Diverter Valve
    Sku: 34473

    O-ring, Small, Diverter Valve

    Small 0-ring for all 1994 to now Smart Jet Selector Valves (i e diverter valves)
    $2.18
    Add to cart
  • On/Off Valve, Water Feature, 1.5in
    Sku: 73003

    O Ring, Hydroflow, 3way Valve

    O-ring for Hydroflow 3way valve
    $1.74
    Add to cart
  • On/Off Valve Insert
    Sku: 73356

    On/Off Valve Insert

    This insert is used on the on/off valve for the soothing stream fountain used on certain Hotsprings spas between 2003-2009   This valve should be replaced if the fountain will not turn off completely when the valve is closed
    $48.92
    Add to cart
  • On/Off Valve .75
    Sku: 73351

    On/Off Valve .75

    This on/off valve is used on Hotsprings spas to turn on and off the Soothing Stream water feature, which runs off the 24-hour circulation pump   If the valve fails to shut off the water supply, remove the black internal section from the valve body, and ...read more
    $61.06
    Add to cart
  • Valve, On/Off 90 degree, Coastal Gray, Hot Spot and Limelight
    Sku: 77430

    Valve, On/Off 90 degree, Coastal Gray, Hot Spot and Limelight

    This Coastal Gray On/Off Valve is used for the water feature on Hot Spot and Limelight tubs This valve turns 90 degrees, for 2014 tubs, please verify how far your existing valve turns If it turns 90 degrees, this is the correct replacement If your existing ...read more
    $28.43
    Add to cart
  • Water Diverter Valve Kit, 2-Position, Hot Spot, Sorrento
    Sku: 39230

    Water Diverter Valve Kit, 2-Position, Hot Spot, Sorrento

    This 2-position (3 and 9 o'clock) Diverter Valve Kit is located under the diverter lever on the top lip of the spa Its purpose is to divert water to different jet combinations when you rotate the lever from 3 o'clock to 9 o'clock Replacement is necessary ...read more
    $15.80
    Add to cart
  • On/Off Valve, Water Feature, 1.5in
    Sku: 73350

    On/Off Valve, Water Feature, 1.5in

    This valve is used to turn on and off the Bella Fontana Water Feature in Hotspring Spas and the Amur Water Feature in Tiger River Spas  
    $81.81
    Add to cart

Showing 31–60 of 596 results