Super service. Thank you.On 05/21/2024 by N. M. (verified customer)
Plumbing: Bleedline Adapter, Elbow, Valve Body, Y
Showing 31–60 of 64 results
-
Sku: 30652Elbow, 90 degree, 1-1/2in Spig X Slip
This is a 1 1/2" 90-degree street elbow made of PVC plastic It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting This allows for the elbow to be used in tighter spaces -
Sku: 20180Barbed Adapter Elbow, Outlet 1/2in
This elbow adapts a 1/2" male pipe thread fitting to a 1/2" male barbed fitting So a female pipe thread fitting can be attached to one side of the elbow, and 1/2" tubing on the other side -
Sku: 38411427-015 Street Elbow 1-1/2 45 Degree
427-015 street elbow 1-1/2 45 degree -
Sku: 74833Comfort Control Valve Body Nut
Nut that holds the 2009 Comfort Control (aka air control valve) body in place -
Sku: 300033PVC Y 2in X 2in X 2in
Wye Plumbing Fitting, 2"x2"x2" -
Sku: 74135Bleedline Bushing, Hot Spring
Bleedline Bushing for 2001 Hot Spring Landmark Dream Jet Massage Plumbing System Fits between the spa shell and the bleedline fitting, part number 30598 The bleedline fitting supplies a small stream of water behind the pillow to prevent water from ...read more -
Sku: 70088Elbow with 1/4″ Barbed Nipple
This kit includes a 90-degree elbow 3/4" barbed on one end and 3/4" female threads on the other Also included is a 1/4" nipple which is then glued into either side of the elbow All that is needed is a hole drilled into either side of the elbow using a ...read more -
Reducing elbow, 1x 3/4 slip x slip -
Sku: 33026Elbow, 90 Degree 1-1/4in Slip X Slip
This elbow is used to join two 1 1/4" male PVC slip fittings or 1 1/4" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Elbow, 1/4in x 1/4in male iron pipe threaded (Mipt) x slip -
Sku: 31401Elbow, Reducing, 2in X 1-1/2in
Reducing Ell, 90-degree, PVC, 2" X 1-1/2" -
Sku: 31107Elbow, 1-1/2in Spigxspig
This PVC elbow is used on the jet pump inlet of many earlier models of Hotspring spas It will connect to a 1 1/2" female PVC slip connector on either end of it It often is tapped with a 1/4" barbed fitting for a bleedline (Part number 30598) -
Sku: 30658Elbow 45 Degree 1-1/4in Slip X Slip
This elbow is used to join two 1 1/4" male PVC slip fittings or 1 1/4" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30657Elbow, 45 Degree 1in Slip X Slip
This elbow is used to join two 1" male PVC slip fittings or 1" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30655Elbow, 45 degree 1/2in Slip X Slip
This elbow is used to join two 1/2" male PVC slip fittings or 1/2" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Elbow, St 90-degree 1-1/2" male iron pipe thread x slip -
This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" female pipe threaded fitting on one side of the elbow And on the other side, it will accept a bare PVC pipe or male PVC slip fitting -
This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" male pipe threaded fitting on each side of the elbow The fitting should either have Teflon tape wrapped on the threads, or use some sort of pipe thread adhesive, or sealer -
This is a 90-degree elbow, made of PVC, and is made to accept a 3/4" male pipe threaded fitting on each side of the elbow The fitting should either have Teflon tape wrapped on the threads, or use some sort of pipe thread adhesive, or sealer -
Sku: 3064490 Degree Elbow 1in Slip X Slip
This elbow is used to join two 1" male PVC slip fittings or 1" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together Reference: 406-010, D2466, ...read more -
Sku: 30641Elbow, 90 Degree 3/8in Slip X Slip
This elbow is used to join two 3/8" male PVC slip fittings or 3/8" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30614Elbow, 1/2in Barb X 1/2in Threaded
PVC elbow that allows a 1/2" barbed fitting and a 1/2" threaded fitting to be connected at a 90-degree angle Both fittings are male, and the barbed fitting should be secured using hose clamps, and the threaded fitting should be wrapped in Teflon tape ...read more -
This elbow adapts a 1/2" female pipe thread fitting to a 1/2" male barbed fitting So a male pipe thread fitting can be attached to one side of the elbow, and 1/2" tubing on the other side -
Fitting, 3/16in barbed x 3/8in male iron pipe threaded
-
Sku: 34145
Side Outlet Elbow, Hot Spot Z
Side outlet elbow, Hot Spot Z -
Sku: 34364Elbow, Spigot X Slip Manifold
Elbow, spigot x slip manifold -
Sku: 36296
Ell 3/8in barbed x 1/2in Slip
Ell, 3/8in barbed x 1/2 slip -
Sku: 300947
Reducing Elbow 1 In X 1/2 In
Reducing elbow 1 inch by 1/2 inch for Hot Spot models beginning in 2003, Hot Spring models beginning in 2007, and Limelight models beginning in 2008 -
Sku: 36954
Reducing Elbow, 1 Inch x 3/4 Inch
Reducing elbow 1 inch by 3/4 inch for various models and applications -
Sku: 72727-BYPElbow, 3/4in X 3/4in Barbed with 1/4in Barbed Nipple
This item is obsolete and replaced by:
77427This 3/4" elbow with a 1/4" barbed nipple coming off of the curve of the elbow is most often found on the suction side of the Silentflo 5000 and 5002 circulating pumps The 3/4" x 3/4" x 1/4" bleed line fitting has a 1/4" nipple (30598) for the 1/4" vinyl ...read more
Showing 31–60 of 64 results