Plumbing Fittings

Plumbing: Check Valve, Plug, Restrictor, Tubing

Showing all 25 results

  • Drain Plug, Wavemaster
    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart
  • Flexible PVC, 3/4in Inside Dimension X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware store The diameter is measured from the inside (I D ) of the piping Note: This is ...read more
    $13.18
    Add to cart
  • 449-020 2in Plug
    This is a 2" PVC plug   It can be used to plug any 2" female PVC fitting and should be installed using PVC primer and cement   You can get PVC cement at your local hardware store
    $4.69
    Add to cart
  • Flexible PVC, 2in inside Diamter X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC This size is usually found coming off of the jet pump or water diverter valves (Smart Jet) It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware ...read more
    $32.85
    Add to cart
  • Flexible PVC, 1/2" inside Diameter X 3ft
    Flexible pvc is a ribbed looking white or beige type of pvc It comes in three foot sections and is glued using pvc primer and pvc cement found at your local hardware store The diameter is measure from the inside (I D ) of the piping Note: This is ...read more
    $11.66
    Add to cart
  • Hartford Loop Assembly
    This retrofit kit is used to replace the air check valve that was used in some Hot Spring spa models This kit replaces the obsolete 72342 Check your serial number in the parts finder above to be sure this part is for your spa
    $71.07
    Add to cart
  • Flexible PVC,1-1/2in Inside Diameter X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC This size is usually found coming off of the jet pump or water diverter valves (Smart Jet) It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware ...read more
    $28.35
    Add to cart
  • Check Valve, Safety Suction
    This check valve's function is to "open" when someone puts their hand over the jet pumps suction fitting within the filter intake This check valve will "open" drawing air into it from the equipment compartment, thereby stopping suction of the jet pump This ...read more
    $43.01
    Add to cart
  • Flexible PVC,1-1/4in Inside Diameter X 3ft
    Flexible PVC is a ribbed looking white or beige type of PVC It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware store The diameter is measure from the inside (I D ) of the piping
    $12.59
    Add to cart
  • Compression Fitting with Check Valve, Tiger River
    This compression fitting (aka pump union, quick disconnect, coupling) is used on the discharge side of the Tiger River Wavemaster Pumps to ensure that the small Silentflo 5000 or 5002 circulation pump pulls water through the filter when the jet pump is off ...read more
    $48.62
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Plug, PVC, 3/4" Spig   This plug is made out of PVC and fits in a female PVC slip fitting   It can be used to plug an extra port on a manifold or tee that is not needed   Or cap off a piece of plumbing that is no longer used
    $5.05
    Add to cart
  • Elbow, 3/4in Poly Barbed
    The four pieces of this pump inlet assembly come pre-assembled and include the check valve This assembly was used on the jet pump on the 1989 Hot Spring Jetsetter, Prodigy, and Sovereign Also used on the 1991-1992 Grandee
    $75.72
    Add to cart
  • Ozone Restrictor, Freshwater 3
    Flow restrictor for the Freshwater III ozone unit used to reduce the ozone order and/or to eliminate any "burping" noise emanating from the spa Simply remove the air filter from your Freshwater unit and attach to this flow restrictor as shown in the picture ...read more
    $75.82
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This PVC fitting is used to plug 1 1/2" female PVC slip fittings   It should be attached using PVC primer and cement, which is available at your local hardware store   It is made out of white PVC plastic
    $14.63
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This is a 1" PVC plug   It is used to plug a 1" female PVC fitting and should be attached using PVC cement and PVC primer   This will usually be used when a fitting has multiple openings, and not all of the openings are being used
    $5.74
    Add to cart
  • Plug 1/2in Spig
    Plug, PVC, 1/2" Spig
    $5.54
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This black hole plug is used on most Hot Spot spas to plug unused holes provided for electrical conduit   Usually, there are two holes predrilled, so that the conduit can enter the equipment compartment of the spa from either side   This plug is used to ...read more
    $1.39
    Add to cart
  • 3/4 IN Check Valve
    3/4" check valve found on many Hot Spring models beginning in 2007, Hot Spot beginning in 2019, and Limelight models beginning in 2019
    $16.50
    Add to cart
  • Plug, Drain Slide 1-1/2in
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com 1-1/2' male threaded PVC plug Available at most hardware stores in various forms
  • Plug, Freeze Pump
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This plug is used to close off the threaded fittings that are built into most jet pump volutes   These ...read more
  • Flow Restricter Valve Assembly
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This flow restrictor is installed inline with the airflow through the Freshwater II Ozonator to prevent ...read more
  • Ozone Flow Restrictor, Freshwater
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com A flow restrictor reduces the amount of ozone that will be sucked into the injector through the ...read more
  • Flow Restrictor Assembly, Freshwater 2
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Flow restrictor reduces the ozone flow rate into the injector thus quieting the spa in the unlikely event ...read more
  • Rubber Plug Set
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Rubber plug set

Showing all 25 results