Plumbing Fittings

Plumbing: Injector, Plug, Reducer, Wallfitting

Showing 1–30 of 46 results

  • Injector, Freshwater Ozone, Black
    The injector fits in-line after the Silentflo 5000 (discharge side and after the heater) This Kynar plastic "venturi" injector is ozone resistant and is used with the Freshwater III High Output Ozonator by Watkins manufacturing, item 72602
    $45.47
    Add to cart
  • Injector, Freshwater Ozone, Red
    This red ozone injector was used with the Freshwater I & Freshwater III (for Hot Spot & Solana spas) It is designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system The injector is matched to the ...read more
    $43.86
    Add to cart
  • Drain Plug, Wavemaster
    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart
  • 449-020 2in Plug
    This is a 2" PVC plug   It can be used to plug any 2" female PVC fitting and should be installed using PVC primer and cement   You can get PVC cement at your local hardware store
    $4.69
    Add to cart
  • Wallfitting, Rear
    This fitting is used on many different Hot Spring spa models in various places including the grill style filter compartment as part of the filter assembly Also used in the filter compartment of all 1992-1996 Tiger River spa models
    $21.92
    Add to cart
  • Wallfitting without Knockout, Tiger River
    This threaded wall fitting is located in the bottom of the filter compartment on all 1997-2010 Tiger River Bengal, Caspian, Sumatran & Siberian spa models This is where the filter standpipe screws into
    $15.37
    Add to cart
  • Manifold, Flow Cone
    Reducer Bushing, 3/4" Spig x 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 3/4" female slip fitting   The connection should be made using PVC primer and cement
    $3.25
    Add to cart
  • Manifold, Flow Cone
    Wall fitting, rear drain, 1/2" drilled, Hot Spring   Rear wall fitting located in the footwell of the spa   Front wall fitting part 30488
    $19.31
    Add to cart
  • Reducer, 2in X 1-1/2in Spig X Slip
    Reducer Bushing, 2" Spig x 1-1/2" Slip   This bushing allows for a 1 1/2" male slip fitting or PVC pipe, rigid or flexible, to connect to a 2" female slip fitting   The connection should be made using PVC primer and cement
    $5.95
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Plug, PVC, 3/4" Spig   This plug is made out of PVC and fits in a female PVC slip fitting   It can be used to plug an extra port on a manifold or tee that is not needed   Or cap off a piece of plumbing that is no longer used
    $5.05
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Reducing Bushing, 1"Spig X 1/2" Slip   This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Reducer Bushing, 1" Spig x 3/4" Slip   This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting   The connection should be made using PVC primer and cement
    $4.72
    Add to cart
  • Elbow, 3/4in Poly Barbed
    This adapter is used to join a 3/4" PVC male fitting and a 1" PVC male fitting together   PVC primer and cement should be used to adhere the fittings
    $5.46
    Add to cart
  • Red Ozone Injector FreshWater III
    Ozone Injector assembly including tubing and check valve for Hot Spot and Solana model spas without dedicated circulation pumps   This injector is designed for when a 2-speed jet pump is used to circulate the water through the heater
    $79.70
    Add to cart
  • Elbow, 3/4in Poly Barbed
    Gray wallfitting, for Hot Spring
    $19.55
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Reducer Bushing, 2" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 2" female slip fitting   The connection should be made using PVC primer and cement
    $6.87
    Add to cart
  • Ozone Injector, Freshwater 1
    This red ozone injector is used in conjunction with the Freshwater I Ozonator It designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system
    $48.72
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Air injector
    $19.55
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This PVC fitting is used to plug 1 1/2" female PVC slip fittings   It should be attached using PVC primer and cement, which is available at your local hardware store   It is made out of white PVC plastic
    $14.63
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This is a 1" PVC plug   It is used to plug a 1" female PVC fitting and should be attached using PVC cement and PVC primer   This will usually be used when a fitting has multiple openings, and not all of the openings are being used
    $5.74
    Add to cart
  • Plug 1/2in Spig
    Plug, PVC, 1/2" Spig
    $5.54
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing 1-1/2" Spig x 3/4 female iron pipe thread   This bushing allows a 3/4" male pipe threaded fitting to be adapted to fit in a 1 1/2" female slip fitting   The connection should be made using PVC primer and cement on the slip portion of the ...read more
    $7.18
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1-1/2" Spig x 1-1/4" Slip  This bushing reduces a 1 1/2" female slip fitting down to a 1 1/4" female slip fitting   PVC primer and cement should be used to glue the bushing in place
    $4.97
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1-1/4" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1 1/4" female slip fitting   The connection should be made using PVC primer and cement
    $5.05
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This is a PVC coupler that allows two PVC pipes to be joined together using PVC primer and cement   One side of the coupler accepts a 1/2" PVC pipe, either rigid or flexible, and the other side accepts a 3/4" PVC pipe, either rigid or flexible
    $3.83
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    This black hole plug is used on most Hot Spot spas to plug unused holes provided for electrical conduit   Usually, there are two holes predrilled, so that the conduit can enter the equipment compartment of the spa from either side   This plug is used to ...read more
    $1.39
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer Bushing, 1/2" Spig x 3/8" Slip This bushing allows a 3/8" male slip fitting or 3/8" PVC or vinyl pipe, rigid or flexible, to be adapted to fit in a 1/2" female slip fitting   The connection should be made using PVC primer and cement
    $3.31
    Add to cart
  • Wallfitting, Drain Modified
    Wallfitting, drain modified
    $15.52
    Add to cart
  • Pump, Wavemaster 5000 1.5HP V2
    Reducer coupling, 2 X 1 5
    $6.80
    Add to cart

Showing 1–30 of 46 results