The team at Backyardplus.com are the best for anything Hot Springs. Super friendly and knowledgeable.On 06/05/2024 by S. O. (verified customer)
Plumbing: Barbed Fitting, Compression Fitting, O Ring, Wear Ring
Showing 1–30 of 49 results
-
This volute o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump This is the large o-ring gasket that sits between the two halves (suction cover and volute) of the wet end This volute o-ring will work on the following pump model ...read more -
Sku: 36675-01DPDrain Plug, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
This drain plug works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" or your model number 36675-01 This drain plug does NOT come with the o-ring See item 36675-01RNG This drain plug will work on the ...read more -
This drain plug o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" marking located on the discharge or your model number 36675-01 This o-ring fits on the wet end drain plug item 36675-01DP -
Sku: 48WUA-WR3536Wear Ring, Watkins Wavemaster Jet Pump, 48 Frame, Vendor Code 3536
This wear ring works on the 48 frame version of the Watkins Wavemaster jet pumps that have a vendor code of 3536 or have a model number that ends in "-03" Only replace your wear ring if you are replacing your impeller Only replace your wear ring if you are ...read more -
Sku: 56WUA-WR3536
Wear Ring, Watkins Wavemaster Jet Pump, 56 Frame, Vendor Code 3536
This wear ring works on the 56 frame version of the Watkins Wavemaster jet pumps that have a vendor code of 3536 or have a model number that ends in "-03" Only replace your wear ring if you are replacing your impeller Only replace your wear ring if you are ...read more -
Sku: SK-WM-7000-V3-BYPComplete Seal Kit, Wavemaster 7000 (ver.3)
Wet End Seal Kit for the Wavemaster 7000 (ver 3) Jet Pump These parts only fit the pumps with a vendor number ending in 4081 All the replacement parts necessary when opening up the "wet end" to cure a leaking pump Since the impeller typically breaks when ...read more -
Sku: 71409Wear Ring, Wavemaster
The jet pump wear ring keeps water from back flowing around the impeller which would reduce the jet pressure significantly It fits inside the "wet end" and slides over the impeller with the ridge side farthest away from the front of the impeller (i e , ...read more -
Sku: 70220Wavemaster Wear Ring
The jet pump wear ring keeps water from back flowing around the impeller which would reduce the jet pressure significantly It fits inside the "wet end" and slides over the impeller with the ridge side farthest away from the front of the impeller (i e , ...read more -
Sku: 71410-BYPVolute O-Ring, Wavemaster
This is the largest O-ring used on the current Wavemaster series of wet ends for Hot Springs, Tiger River, Limelight, Solana and Hot Spot model spas This o-ring fits between the suction cover and the volute of the pump series: XP2/XP2E This o-ring is only ...read more -
Sku: 71554Wavemaster Volute O-Ring
GECKO MODEL O-RING Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver 3), 8200, 9000 (ver 3), 9200 jet pumps Will fit on pump series: XP2/XP2e -
Sku: 72137Volute O-ring, Tobago Jet Pump
Replacement volute o-ring for the 1 5hp Tobago FMCP (center discharge) jet pump used from 2003-2007 -
Sku: 34447-x2-BYPCompression Fitting O-rings, for 2 inch Union (Qty of 2)
(Quantity of 2 o-rings) O-rings used on the pumps 2" compression fittings ( 71036 ) found on most Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Also used on the replacement "Wet End" pump kits and some heaters The 2" measurement refers ...read more -
O-ring used on the 2" compression fittings (71036) on most Hot Spring, Tiger River, Hot Spot, and Solana spa models The 2" measurement refers to the inner diameter of the most narrow part of the compression fitting/union The o-ring that is included measures ...read more -
Sku: 71036Compression Fitting, 2in with O-Ring
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more -
Sku: 30237-x2-BYPCompression Fitting O-ring, for 1-1/2 inch Union (Qty. of 2)
1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump No Teflon tape is needed for the jet pump ...read more -
1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump No Teflon tape is needed for the jet pump ...read more
-
Sku: 71038Compression Fitting, 1-1/2in with O-Ring
This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more -
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling 1-1/2" Compression Fitting 2" Compression Fitting -
Hot Spring, Hot Spot & Solana spas only This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple The ...read more -
For Tiger River and Limelight spas only This 1/2" barbed adapter fitting is located on the front of Wavemaster Jet Pumps on Tiger River and Limelight spas Teflon tape should be used on the threads of this fitting for installation -
-
Sku: ML-1OZ-BYPSilicone Grease, 1 oz. Tube
Silicone grease ideal for lubricating o-rings -
Sku: 71409-E
XP2E Wear Ring
This is the XP2E wear ring for the after-market impellers 71406-SW, 71405-SB and 71404-SY Please check the dots at the end of your impeller Item 71406-SW (Silver, White), item 71405-SB (Silver, Blue) and item 71404-SY (Silver, Yellow) -
This is the largest o ring on the Wavemaster 7000 (v 1) jet pump It fits between the cover and the seal plate -
Sku: 30222Sta Rite Diffuser O-Ring
Diffuser o-ring for the 1hp & 2hp Sta-rite jet pumps used in Hot Spring models prior to 1993 -
Sku: 30220Volute O-Ring, Starite
Volute O-ring used on the Sta-rite 1HP and 2HP Max-E-Glas jet pump on Hot Spring spa models prior to 1993 -
This o-ring fits onto the front of the diffuser on the Wavemaster 7000 (v 1) jet pump and also between the suction flange and the suction cover on the front of the pump -
Largest o ring on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump seal plate -
O-ring that mounts onto the front of the pump diffuser -
This replacement compression fitting split nut (AKA Split Union Nut-2") is used to connect heaters on the 1993-1994 Hot Spot Z, all 1998-current Hot Spot models, Solana models beginning in 2000 and all 1992-1994 Tiger River spas It is designed in two half ...read more
Showing 1–30 of 49 results