Description
What’s Included: Watkins Wavemaster® 3000/5000 (FMHP Series) Jet Pump with power cord and vent shroud. Also included is the bleedline nipple (item 32267) which comes installed on the wet end.
Specs: 115v./60hz, 2 speed, 1.0 HP, 48 frame, 1-1/2″ intake/discharge. Â
Description: This Wavemaster® 3000/5000 jet pump is the current replacement for the 1993-1997 Hot Spot Round, Hot Spot RE and 1998-2000 Hot Spot2 and Hot Spot SE spa models. Also the replacement for the 1989-1996 Hot Spring Jetsetter and Prodigy. If you have a pre-1997 Tiger River Manora or Tondi spa model and your tub is wired 230v, then use the 33980-BYP pump.
Installation note: This pump ships with a standard four-wire power cord (as shown) with flag terminals on the ends. If you have a pre-1998 Hot Spot, you may need the optional power cord with connector 70885 or use the power cord from your old pump. Both the suction and discharge on this jet pump are 1.5″, if your current jet pump has a 2″ suction you may need the 34470 adapter, or you may need a different jet pump.
Important information for replacement parts:
Please check vendor code on your pump before ordering replacement parts.
| Vendor Code: 4081 Model: 34677AA, 34677 |
|||
|---|---|---|---|
| Wet End | Impeller | Shaft Seal | Wear Ring |
| 33980-WETEND* | 70457** | 71447-BYP | 70220 |
*Stamped on volute: 92770501A. Stamped on suction cover: 9123130.
**(Dots: orange)
| Vendor Code: 3861 Model: 34677-02 |
|||
|---|---|---|---|
| Wet End | Impeller | Shaft Seal | Wear Ring |
| Please call 805-541-9000 or text us photos of your pump’s labels | |||
If the vendor code is “3861” or has a “-01, or –02” at the end of the model number, please call 805-541-9000 or text us photos of your pump’s labels or stickers.
| After-Market 34677-BYP Model: 02110000-1010 |
|||
|---|---|---|---|
| Wet End | Impeller | Shaft Seal | Wear Ring |
| 33980-WETEND* | 70457** | 71447-BYP | 70220 |
*Stamped on volute: 92770501A. Stamped on suction cover: 9123130.
**70457 Dots: orange (use 70220 wear ring)
If you can’t determine the dots on your impeller, buy the entire wet-end kit. The installation time is about the same.
Be the first to review “Pump, Wavemaster 3000/5000”