Very helpful. Got items fast(2) would use again and recommend highly! Gary from MaineOn 05/15/2024 by G. D. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Brand: Hot Spot, Hot Spring, Limelight
Showing 1–30 of 125 results
-
BACK IN STOCK! Newest IQ 2020 Spa Control System for most Hot Spring and Limelight spas beginning the 3rd quarter of 2012, and all Hot Spring and Limelight spa models beginning in 2013 What's included: Main control board "motherboard" and the heater ...read more$640.88 Select Options -
Sku: 77119IQ 2020 Heater Relay Board
This IQ2020 Heater Relay Circuit Board is the newest revision for the 2001-2009 5 IQ2020 Control Box It's upgraded design provides a more efficient method of connecting the heater's power cord to this board, therefore, reducing fatigue on the two "beefed up" ...read more -
This OEM replacement IQ 2020 control board (motherboard) is for all IQ 2020 Control Boxes (77271) found on all 2001-2009 5 Hot Spring, Tiger River and Limelight spa models It is used on domestic 60hz model spas only -
This is the IQ 2020 heater relay board compatible with the Eagle IQ 2020 spa control system for all forward Hot Spring and Limelight models as well as Tiger River spa retrofits Reference: 1302801-1 -
This is the IQ 2020 spa control system also called "Hawk control box" made for most Hot Spot brand spas built in the 3rd quarter of 2012, and all Hot Spot models beginning in 2013 It houses the electronics and circuitry that interface the spa controls with ...read more$459.68 Select Options -
This IQ 2020 control box is the spa control system for 2006 to 3rd quarter 2012 Hot Spot models and Solana spas beginning in 2006 Please be aware that the control panel that is compatible with this control box unit ("Cedric" system with Invensys circuitry) ...read more -
This OEM replacement IQ 2020 control board is for the Orca Box (76082) which has the Invensys circuitry, 115/220 VAC, used on 2009 Phase 2 through 3rd Quarter 2012 Hot Spring, Tiger River, and Limelight If your circuitry is marked with a blue label that says ...read more -
This Gecko IN YJ 2 control box replaces the now obsolete 76091 control box used on 2003-2005 Hot Spot SX and TX wired for 115v, Solana RX 2003- 2005 and Hot Spot Spring 2010-2011 and Hot Spot Dash 2010-2012 hot tubs This entire retrofit will ...read more -
Sku: 77726-BYPControl Box, 1999-2005 Hot Spot and Solana Retrofit, Gecko IN.YJ 3 Series, 115/230 Volt, 60HZ, After-Market
The Gecko IN YJ 3 control box is part of the retrofit that replaces the discontinued S-Class control system This retrofit is for the following Hot Spot and Solana models: 1 Pump Systems Hot Spot 1999-2000 SE (Y) 1999-2002 RE (Z), RLX (Z/ZQ), SLX ...read more -
Sku: 77726-BUNDLEGecko IN.YJ 3 Series Complete System, 1999-2005 Hot Spot and Solana After-Market Retrofit
The Gecko IN YJ 3 Series complete system is the retrofit used on: Hot Spot 1999-2000 SE (Y); 1999-2002 RE (Z), RLX (Z/ZQ), SLX (Y/YQ); 2001-2002 SLXtra (W/WQ); 2003-2005 Sorrento (SOR/SORS), Tobago (TOB), Trinidad (TRI); 2010-2012 Dash (DAS) Solana ...read more -
Sku: 77726-INTCHWiFi Module, Gecko IN.YJ, inTouch 2
This wireless (WiFi) module allows you to connect your spa's control system to your home WiFi network to provide remote control access from your iPad, iPhone, Android or iPod device Find the in Touch 2 app in the Apple store or Google Play in Touch 2 is ...read more -
This Gecko IN YJ 3 control box used on 2022 Hot Spot Relay and Rhythm This control box is for a 2 pump system wired for 230 volts This entire retrofit will include: Specifications: 2 Pump 230v 60Hz -
This IQ 2020 heater relay board replaces the now obsolete 76071 (Orca with Invensys Circuitry) This IQ 2020 heater relay board is for the 2009 5 to 2012 5 Hot Spring, Tiger River and Limelight spa models using the Orca (Invensys control box system) For ...read more -
Sku: 77271-OPENBOXControl Box, Pug, Retrofit, 60HZ (Open Box)
Replacement for the discontinued IQ 2020 (73223) that was used on all 2001-2009 5 Hot Spring, Tiger River and Limelight spas This control box is also the retrofit upgrade replacement for the discontinued IQ 2000 (71382) that was used on all 1997 Hot Spring ...read moreOpen Box Warning! Read warning -
Heater connection wire kit, 8" long, 10 gauge wire, qty of 2 Connects from Hot Spot heater to board of S-Class series control box -
Grounding bar for the Hot Spot heater (after-market Gecko S-Class) 5 Position, 14-6 AWG This grounding bar is attached to the heater on Hot Spot and Solana brand spas and allows the pump and other accessories to have a secondary ground tied into the ...read more -
Factory replacement control box with heater for the now obsolete 71584 control box used on the 1999-2002 Hot Spot RE, RLX, SE, SLX, and 2001-2002 SLXtra and the Solana 2000-2002 X (triangle shaped), 2003-2005 Solana RX, SX, and TX spa models Note ...read more -
This jumper is used to bypass the pressure switch on the 2002-forward IQ 2020 spa control system The PDR Titanium Replacement Heater has its own automatic cut-off in the event of a low flow condition thus negating the need for a pressure switch After ...read more -
Replaces the obsolete 39525 and obsolete 39204 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 ...read more -
Sku: 79006Thermistor, Control Thermostat, Watkins No Fault Heater, Hot Spring, Tiger River and Limelight
Replaces the obsolete 39530 and obsolete 39205 Newly designed and includes o-ring This control thermistor is a safety device that measures the water temperature of your spa and communicates that temperature reading to the Motherboard It simply screws ...read more -
Replaces 38415 Newly designed and includes o-ring This control thermostat thermistor sensor detects the spa waters temperature and relays that information back to the system It simply screws into the No Fault Heater Housing (hand tight only) and plugs ...read more -
Replaces 38416 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F It simply screws ...read more -
Sku: 34878O-Ring, Control Thermistor
Control Thermostat Thermistor o-ring for the 79006 and 78970 thermistors This o-ring is located on the "inlet" side of the heater and is the larger of the two thermistor o-rings For the outlet side of the heater see the part# 34879 o-ring -
Sku: 34879O-Ring, Hi-Limit Thermistor
High-Limit Thermistor o-ring for the 79005 and 78969 thermistors This o-ring is located on the "outlet" side of the heater and is the smaller of the two thermistor o-rings For the "inlet" side of the heater see part 34878 -
This Hot Spot heater electronic pressure switch is a safety device that will shut down the heater if a "low water flow" condition occurs It is used on Hot Spot models (except Sprint & Dash models) and Solana spa models Some symptoms of failure include ...read more -
Sku: 74723Relay, IQ 2000 Control Box
This 30amp 18volt DC coil relay is used in the 1997 and 1998-2000 Hot Spring & Tiger River IQ 2000 Control Box There are two of these relays located in the upper left corner of the IQ 2000 control box One is the heater relay and one is the heater ...read more -
Sku: 1306501Power jumper, 2 pin, 15mm, Hawk
This 2 pin jumper is used in the Cedric Control box (73859) as well as the Hawk control box (76840) for Hot Spot tubs -
Sku: 39192-X2-BYPPower Jumper, Heater Relay Board, 2-pin
2-pin metal jumper is one of two different jumpers that are used on all years of the IQ 2020 Heater Relay Board -
Sku: 39193-X2-BYPPower Jumpers, Heater Relay Board, 3-Pin (pkg of 2)
Package of two 3-pin metal jumpers is one of two different jumpers that are used on the original 73355 Heater Relay Board On the new style Heater Relay Board there are two of these 3 pin jumpers The jumpers are inserted flat on the top edge of the heater ...read more -
Sku: 39193Power Jumper, Heater Relay Board, 3-Pin
The 3-pin metal jumper is one of two different jumpers that are used on the original 73355 Heater Relay Board On the new style heater relay board, there are two of these 3 pin jumpers The jumpers are inserted flat just above the gray terminal block numbered ...read more
Showing 1–30 of 125 results