Great serviceOn 04/19/2024 by H. P. (verified customer)
Control panels give you the ability to turn the jets on, adjust the temperature, turn the light on and more. Complete one piece replacements as well individual parts for these panels are available here.
Brand: Tiger River
Showing 1–30 of 45 results
-
This Hot Spring Limelight control panel (aka control head or topside) for all 2012 5-2014 Limelight spa models It is also the Tiger River Spas control panel retrofit option It control panel can only be used with 76836 IQ 2020 spa control system (aka Eagle ...read more -
Sku: 72065Control Panel Ribbon Cable, IQ 2020
This ribbon cable connects the control panel (Tiger River) or control head (Hot Spring) to the IQ 2020 control box The ribbon has connectors on both ends One end clips onto the backside of the control panel's "control head" and the other end onto the IQ ...read more -
Sku: 33934Compression Spring
The compression spring is used on the skimmer weirs to keep tension on the skimmer weir bullet Also used on the 1997 Tiger River Control Panels behind the jet and light button -
This magnetized push button was used on the Tiger River Control Panels from 1992-1997 All Tiger River Model Spas The button is used for both the jet pump activation, and the light activation -
This screw was used to hold the thermostat knob in place on the topside control panel used on Tiger River spas from 1992 to 1994 and the round-shaped air control knob on air valves used on Hotspring spas from 1989 to 1993 5 -
This wiring harness connects the electronic thermostat to the PWA Board on the backside of the 1995-1996 Tiger River Control Panel If there is a communication problem with this wiring harness there will be erratic heating issues in a 1995-1996 Tiger River ...read more -
Sku: 31394Control Panel-Winterizing Plug
Control panel winterizing plug -
Sku: 71986Rj-12 Phone Connector, 25 Pack
25 Pack of the connectors that go on the end of the cable for the replacement aux panels for spas made beginning in 1998 -
Sku: 73739Navigator Battery Plug
This is the plug used to secure the AA Batteries into the Navigator Remote Control It screws into the bottom of the Navigator by fitting a coin into the slot and using the coin to grip the plug -
Sku: 73159Navigator Bracket
This is the plastic holder that can be mounted using two self tapping screws to virtually any surface like the side of the spa, or a post or wall inside indoors, to hold the Navigator Remote Control -
Sku: 36936Light Knob, Dark Gray
Replacement knob in dark grey for adjustment of the brightness of the spa light This was used on Hotsprings spas in 1997 with dark grey control panels Knob connects to the light dimmer built into the spa control panel -
Sku: 35106Control Panel Housing, Tiger River
This plastic housing (plate) is found on all 1993-1997 Tiger River Control Panels It is the base piece that houses the jet & light buttons and temp dial -
This label is used on all 1992-1996 Tiger River topside control panels This can be used as a replacement if the label on the topside is marred or peels off Simply peel off the old label after removing the thermostat knob and jet push buttons, and stick ...read more -
Sku: 35101Temperature Dial, Tiger River
This gray-colored temperature (thermostat dial) dial is found on all 1993-1997 Tiger River spa top-side control panels -
Sku: 35099Adapter, T-Stat Knob
This adapter was used from 1992 to 1997 on all Tiger River topside control panels The adapter accepts the decorative knob that is turned to adjust the temperature and connects to the actual thermostat, which adjusts the thermostat when the knob is turned -
Sku: 35087Standoff, Control Panel 1995-1997
This standoff is used to position the control panel circuit board apart from each other on all 1995-1997 Tiger River spa models -
Sku: 33863Clamp, Control Panel, Tiger River
This clamp attaches to the back side of the 1992-1997 Tiger River topside control with a screw, and when tightened, holds the topside down to the shell of the spa An o-ring is used between the topside and the shell, which is compressed by the clamp pulling ...read more -
Sku: 33859Bezel, Control Panel, Tiger River
This bezel serves two purposes Used on all Tiger River Models from 1992 - 1997, it finishes off the edge around the jets and lights buttons on the control panel for aesthetics, as well as secures the button in place to prevent the button from popping out ...read more -
Sku: 33421Comm Cord, Tiger River Pre-1995
This communication cord looks like a Cat5 cable It communicates to the main control box circuit board (70374 or 70375) from the control panels PCB board in the 1992-1994 Tiger River Khyber, Manora & Tondi spa models -
Sku: 33275O-Ring, Control Panel .07 X .07
These o-rings used on 1992 to 1997 Tiger River control panels, fit around the posts on which the buttons for the jets and lights glide up and down The o-rings serve as pads to soften the stop of the button when it is pushed all the way down -
Sku: 33138Spring, Control Panel 1/8in X 1-1/4in
Spring used on the button on Tiger River Control Panels from 1992-1994 This spring resides behind the button to help the button rebound after being pressed to activate the jets or lights -
Sku: 33132Push on Retainer, .094
Push on retainer, 094 -
Sku: 32425Switch, Toggle
This toggle switch was used on the 1991-1993 Grandee to turn off the "Timed Jets" feature an also used on the 115 volt Hot Spring and Tiger River spa models to activate the "Summer Mode" (aka Summer Timer) -
Sku: 30360Screw, 10 X 1/2in Stainless Steel
This screw used to mount bracket for Navigator Remote Control -
This screw is used to hold in place the standoffs (35087) that secure the thermostat board (71340)to the topside control panel in Tiger River spas made from 1995 to 1997 -
Sku: 300859Nut, 2.5mm
This nut is used to secure the circuit board to the back of the control panel bezel on Tiger River spas from 1992-1997 It replaces a small spring clamp that used to do the same job The posts that the nut screws on to are actually plastic and are not ...read more -
Two of these screws are used to hold the thermostat in place to the circuit board on the topside control panel for Tiger River spas from 1992 to 1994 -
This retainer ring is used to hold the thermostat knob in place on the Tiger River topside control panel -
Sku: 34009Screw, Control Panel, Tiger River
This screw is used to mount Tiger River control panels to the shell of the spa on the bar top It secures a flip-out tab that clamps the control panel to the shell from the backside of the shell It was used on all models from 1992-1997 -
Sku: 71811Interlock Switch Bypass Kit
Interlock switch bypass kit
Showing 1–30 of 45 results