Super service. Thank you.On 05/21/2024 by N. M. (verified customer)
Plumbing: Elbow, Handles Knobs Levers Bezels, On Off Valve, Wallfitting
Showing 31–60 of 61 results
-
Sku: 33026Elbow, 90 Degree 1-1/4in Slip X Slip
This elbow is used to join two 1 1/4" male PVC slip fittings or 1 1/4" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Elbow, 1/4in x 1/4in male iron pipe threaded (Mipt) x slip -
Sku: 31401Elbow, Reducing, 2in X 1-1/2in
Reducing Ell, 90-degree, PVC, 2" X 1-1/2" -
Sku: 31107Elbow, 1-1/2in Spigxspig
This PVC elbow is used on the jet pump inlet of many earlier models of Hotspring spas It will connect to a 1 1/2" female PVC slip connector on either end of it It often is tapped with a 1/4" barbed fitting for a bleedline (Part number 30598) -
Sku: 30658Elbow 45 Degree 1-1/4in Slip X Slip
This elbow is used to join two 1 1/4" male PVC slip fittings or 1 1/4" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30657Elbow, 45 Degree 1in Slip X Slip
This elbow is used to join two 1" male PVC slip fittings or 1" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30655Elbow, 45 degree 1/2in Slip X Slip
This elbow is used to join two 1/2" male PVC slip fittings or 1/2" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Elbow, St 90-degree 1-1/2" male iron pipe thread x slip -
This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" female pipe threaded fitting on one side of the elbow And on the other side, it will accept a bare PVC pipe or male PVC slip fitting -
This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" male pipe threaded fitting on each side of the elbow The fitting should either have Teflon tape wrapped on the threads, or use some sort of pipe thread adhesive, or sealer -
This is a 90-degree elbow, made of PVC, and is made to accept a 3/4" male pipe threaded fitting on each side of the elbow The fitting should either have Teflon tape wrapped on the threads, or use some sort of pipe thread adhesive, or sealer -
Sku: 3064490 Degree Elbow 1in Slip X Slip
This elbow is used to join two 1" male PVC slip fittings or 1" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together Reference: 406-010, D2466, ...read more -
Sku: 30641Elbow, 90 Degree 3/8in Slip X Slip
This elbow is used to join two 3/8" male PVC slip fittings or 3/8" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30614Elbow, 1/2in Barb X 1/2in Threaded
PVC elbow that allows a 1/2" barbed fitting and a 1/2" threaded fitting to be connected at a 90-degree angle Both fittings are male, and the barbed fitting should be secured using hose clamps, and the threaded fitting should be wrapped in Teflon tape ...read more -
This elbow adapts a 1/2" female pipe thread fitting to a 1/2" male barbed fitting So a male pipe thread fitting can be attached to one side of the elbow, and 1/2" tubing on the other side -
Sku: 34145Side Outlet Elbow, Hot Spot Z
Side outlet elbow, Hot Spot Z -
Sku: 34364Elbow, Spigot X Slip Manifold
Elbow, spigot x slip manifold -
Sku: 71117
Wallfitting, Drain Modified
Wallfitting, drain modified -
Sku: 36296
Ell 3/8in barbed x 1/2in Slip
Ell, 3/8in barbed x 1/2 slip -
Sku: 300947
Reducing Elbow 1 In X 1/2 In
Reducing elbow 1 inch by 1/2 inch for Hot Spot models beginning in 2003, Hot Spring models beginning in 2007, and Limelight models beginning in 2008 -
Sku: 36954
Reducing Elbow, 1 Inch x 3/4 Inch
Reducing elbow 1 inch by 3/4 inch for various models and applications -
Sku: 72727-BYPElbow, 3/4in X 3/4in Barbed with 1/4in Barbed Nipple
This item is obsolete and replaced by:
77427This 3/4" elbow with a 1/4" barbed nipple coming off of the curve of the elbow is most often found on the suction side of the Silentflo 5000 and 5002 circulating pumps The 3/4" x 3/4" x 1/4" bleed line fitting has a 1/4" nipple (30598) for the 1/4" vinyl ...read more -
This rear wall fitting is found on the backside of the spa shell and attached to the drain plumbing It has a front wall fitting (30488) and o-ring (30482) that screws into it from the front side of the spa shell The front wall fitting has a female 1-1/2" ...read more -
Sku: 10430Rear Venturi Wallfitting
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Rear wallfitting for the Hydro-Air jet used in all Hot Springs models in 1990 and 1991 -
Sku: 70246Handle, Slide Drain
OBSOLETE This handle is used on the drain valve for Hotspring spas manufactured from 1990 to 1992 It's a gate style valve that is pulled up vertically to open and pushed down to close The valve is made up of a few components that can be replaced when ...read more -
Sku: 70247Drain Valve Handle, Slide Valve Style
Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice This drain valve body has a T shaped white handle that is pulled upwards when it's time to drain the ...read more -
Sku: 33729Wallfitting, Pvc Rear
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com -
Sku: 33728Wallfitting, Front 1-1/2in
Obsolete: Factory replacement suggestion item #74958 and 75146 Used in the 2001-2008 Tiger River & Solana spas The suction fitting style has been updated to 2009 standards and requires the 74958 wall fitting and the 75146 or 75147 grate -
Sku: 33324Front Wallfitting, Jetstream Jet, Gray
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Gray threaded wall fitting nut inserts through the spa shell and screws into the Jetstream Jet body -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" male pipe threaded fitting on one ...read more
Showing 31–60 of 61 results