It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
Plumbing: O Ring, Seal, Seal Plate, Shaft Seal, Slinger
Showing 1–30 of 57 results
-
This volute o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump This is the large o-ring gasket that sits between the two halves (suction cover and volute) of the wet end This volute o-ring will work on the following pump model ...read more -
Sku: 36675-01DPDrain Plug, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
This drain plug works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" or your model number 36675-01 This drain plug does NOT come with the o-ring See item 36675-01RNG This drain plug will work on the ...read more -
This drain plug o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" marking located on the discharge or your model number 36675-01 This o-ring fits on the wet end drain plug item 36675-01DP -
Sku: SK-WM-7000-V3-BYPComplete Seal Kit, Wavemaster 7000 (ver.3)
Wet End Seal Kit for the Wavemaster 7000 (ver 3) Jet Pump These parts only fit the pumps with a vendor number ending in 4081 All the replacement parts necessary when opening up the "wet end" to cure a leaking pump Since the impeller typically breaks when ...read more -
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps Please find your pump model number and if your pump is an OEM ...read more -
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps manufactured by LX (Lingxiao) Please find your pump model number and ...read more -
Sku: 36675-01SSShaft Seal, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This shaft seal will only work with the Vico brand wet end An indicator that your Watkins Wavemaster jet pump was made by Vico is the model number will end in "-01" ...read more -
Sku: 71410-BYPVolute O-Ring, Wavemaster
This is the largest O-ring used on the current Wavemaster series of wet ends for Hot Springs, Tiger River, Limelight, Solana and Hot Spot model spas This o-ring fits between the suction cover and the volute of the pump series: XP2/XP2E This o-ring is only ...read more -
Sku: 71554Wavemaster Volute O-Ring
GECKO MODEL O-RING Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver 3), 8200, 9000 (ver 3), 9200 jet pumps Will fit on pump series: XP2/XP2e -
Sku: 72137Volute O-ring, Tobago Jet Pump
Replacement volute o-ring for the 1 5hp Tobago FMCP (center discharge) jet pump used from 2003-2007 -
Sku: 34447-x2-BYPCompression Fitting O-rings, for 2 inch Union (Qty of 2)
(Quantity of 2 o-rings) O-rings used on the pumps 2" compression fittings ( 71036 ) found on most Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Also used on the replacement "Wet End" pump kits and some heaters The 2" measurement refers ...read more -
O-ring used on the 2" compression fittings (71036) on most Hot Spring, Tiger River, Hot Spot, and Solana spa models The 2" measurement refers to the inner diameter of the most narrow part of the compression fitting/union The o-ring that is included measures ...read more -
Sku: 71036Compression Fitting, 2in with O-Ring
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more -
Sku: 71038Compression Fitting, 1-1/2in with O-Ring
This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more -
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling 1-1/2" Compression Fitting 2" Compression Fitting -
Hot Spring, Hot Spot & Solana spas only This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple The ...read more -
Sku: ML-1OZ-BYPSilicone Grease, 1 oz. Tube
Silicone grease ideal for lubricating o-rings -
This is the largest o ring on the Wavemaster 7000 (v 1) jet pump It fits between the cover and the seal plate -
Sku: 30222Sta Rite Diffuser O-Ring
Diffuser o-ring for the 1hp & 2hp Sta-rite jet pumps used in Hot Spring models prior to 1993 -
Sku: 70032-BYPSeal Plate Kit, Starite- After Market
This after-market (Sta-rite) seal plate is the part of the "wet end" that bolts onto the pump motor This seal plate is the replacement for both the 1hp and 2hp Starite Max-E-Glas jet pumps used on Hot Spring models prior to 1993 Please note, the pump ...read more -
Sku: 70032-SPSeal Plate only
This after-market (Sta-rite) seal plate is the part of the "wet end" that bolts onto the pump motor This seal plate is the replacement for both the 1hp and 2hp Starite Max-E-Glas jet pumps used on Hot Spring models prior to 1993 Note: DOES NOT INCLUDE ...read more -
Sku: 70400-BYPShaft Seal, Wavemaster 7000 (v.1)
This shaft seal is for the Wavemaster 7000 (v 1) Sta-rite 5/8" shaft seal used on the 1HP and 2HP jet pumps that were built from 1998 forward This seal is used with the seal plate that DOES NOT require the copper heater sink If you are repairing a pump ...read more -
Sku: 30224Starite Shaft Seal
Sta-rite shaft seal used on the 1HP and 2HP jet pumps that use a copper heat sink on Hot Spring spas Reference number: U109-93SS -
Sku: 30220Volute O-Ring, Starite
Volute O-ring used on the Sta-rite 1HP and 2HP Max-E-Glas jet pump on Hot Spring spa models prior to 1993 -
This o-ring fits onto the front of the diffuser on the Wavemaster 7000 (v 1) jet pump and also between the suction flange and the suction cover on the front of the pump -
Largest o ring on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump seal plate -
This is the after-market 3/4" Replacement Shaft Seal for the Wavemaster 7000 version 2 and the Wavemaster 9000 -
Sku: 71030Shaft Seal, Wavemaster 7000 (version 2) and 9000
This item is obsolete and replaced by:
71030-BYPReplacement Shaft Seal for the Wavemaster 7000 version 2 and the Wavemaster 9000 See item 71030-BYP for after-market shaft seal -
O-ring that mounts onto the front of the pump diffuser -
Sku: 70039Slinger, Starite
Water slinger used on the 1HP and 2HP Sta-rite Max-E-Glas jet pump on Hot Spring spas The slinger prevents water, that may be leaking from the shaft seal, from dripping back into the windings of the electric motor and corroding that motor
Showing 1–30 of 57 results