Very easy to work with. It got here on time very. GoodOn 10/09/2023 by L. C. (verified customer)
Brand: Hot Spring
Showing 151–180 of 219 results
-
Lock washer for the diffuser screw on a Wavemaster 7000 (ver 2) and Wavemaster 9000 jet pump -
Sku: 70126Pump Mounting Bracket, Starite 2HP
Pump mounting bracket used to secure the 2HP Sta-rite Max-E-Glas jet pump to the floor of the Hot Spring equipment compartment -
Sku: 70031Pump Mounting Bracket, Starite 1HP
Pump mounting bracket used to secure the 1HP Sta-rite Max-E-Glas jet pump to the floor of the Hot Spring equipment compartment -
Sku: 70946Impeller Screw, Wavemaster 9000
This stainless steel screw holds the impeller onto the Wavemaster 9000 jet pump shaft -
Flat Volute washer for the Wavemaster 7000 version 2 and he Wavemaster 9000 -
Sku: 71066Flow Tool
This flow tool is used to determine if the circulation pump flow is adequate to keep the spa from tripping the heater high-limit One end of this tool is used to unscrew the perforated drain grate and the other end is inserted into the drain The flow of ...read more -
Sku: 73740Leak Detection Kit
For Technicians Only Leak detection kit for Hot Spring, Hot Spot, and Limelight models -
Sku: Ceramic-Disk-BYPCeramic Pump Seal Disk
This ceramic piece is part of most pump seal kits -
Sku: 71400Motor, 1.5Hp, XP
This is a replacement motor for a Wavemaster 5000 used on Tiger River and Hotsprings spas It can be wired 110 volts or 220 volts and is a single speed motor Will accept 48y frame wet ends -
Sku: 70959Base, Wavemaster 9000
Black plastic base that serves two purposes: The first is to support the pump & motor and the second is to secure the base to the equipment compartment floor If you have a 48 frame pump, you will need the rubber pad 70958 that inserts/sits in the plastic ...read more -
This hex screw runs through the flange of the motor into the seal plate on a Wavemaster 7000, second version and a Wavemaster 9000 jet pump They are used to hold the seal plate in place against the motor -
This stainless steel screw secures the diffuser to the seal plate on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump -
Bolt that secures the suction flange onto the front of the Wavemaster 7000 (v 1) -
Sku: 70121Run Capacitor, Starite 2HP
Run capacitor used on all 2HP Starite Max-E-Glas jet pumps on Hot Spring spas -
Sku: 30549Union, 1-1/2in Slip x Threaded
Union, 1-1/2in slip x threaded -
This screw is used to secure the volute to the pump base 70959 -
Sku: 70958Rubber Motor Pad, Wavemaster 9000
Rubber pad between the motor and the base to keep vibrations to a minimum It's used with item 70959 plastic pump base If you use a 48 frame pump, you need this rubber pad to fill the gap that is left between the motor and the base If you have a 56 frame ...read more -
One of two volute washers on the Wavemaster 7000 (second version) and the Wavemaster 9000 jet pump -
This nut goes onto the volute bolt that secures the seal place to the volute -
Sku: 77820
Pump Shroud
Pump shroud for 72991 jet pumps with vendor number 3536 -
This Wavemaster® 5000 1 5HP jet pump was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models Also included is the bleedline nipple (item 32267) -
This Wavemaster® 3000/5000 is a 115v jet pump is the current replacement for the 1993-2002 Hot Spot Round, Hot Spot RE and 1995-2000 Hot Spot2 and Hot Spot SE spa models Also the replacement for the 1990-1996 Hot Spring Jetsetter and Prodigy and the 3rd ...read more -
Sku: 35522-1Pump, Wavemaster 7000 (ver. 2)
This is the second version of the Wavemaster® 7000 jet pump It was used on the 1995-1996 Hot Spring Grandee, Sovereign and the 1995-1996 Hot Spring 220volt only Sovereign (IH) model This pump can be used in place of 36070 -
Sku: 34462Pump, Wavemaster 9000 (ver.2)
Obsolete: No longer available from Factory This Wavemaster® 9000 jet pump is the replacement for the Wavemaster 9000 ver 1 and ver 2 for Hot Spring 1994-1996 Highlife, 1995-1996 Summit, and Landmark spa models Also included is the bleedline nipple ...read more -
Sku: 56WUA500-VWavemaster 9000/9200, 8000/8200 Volute O-Ring
LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 56-frame LX wet ends item 77713 and 77712 -
Sku: 48WUA-V
Wavemaster Volute O-Ring
LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 48-frame LX wet ends item 77711, 77710, and 77709 Stamped on wet-end: PP-GF30; B436-14 (03) Reference models (see ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com PART # HAS CHANGED TO 300349 (obsolete) Used on the base of the Wavemaster 8000 (ver 3), 8200, 9000 ...read more -
Sku: 70032Seal Plate, Starite
This Sta-rite seal plate is the part of the "wet end" that bolts onto the pump motor This seal plate is the replacement for both the 1hp and 2hp Starite Max-E-Glas jet pumps used on Hot Spring models prior to 1993 Note: Includes a new shaft seal and ...read more -
Sku: 70071Insert, Seal Plate, Starite
Copper insert (heat sink) used on all 1HP and 2HP Starite Max-E-Glas jet pumps on Hot Spring spas Use with 30224 shaft seal -
Replacement Sta-rite impeller for the 2Hp pumps used on the Hot Spring Highlife prior to 1992
Showing 151–180 of 219 results