It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Showing 1–30 of 48 results
-
BACK IN STOCK! Newest IQ 2020 Spa Control System for most Hot Spring and Limelight spas beginning the 3rd quarter of 2012, and all Hot Spring and Limelight spa models beginning in 2013 What's included: Main control board "motherboard" and the heater ...read more$640.88 Select Options
-
This is the IQ 2020 spa control system also called "Hawk control box" made for most Hot Spot brand spas built in the 3rd quarter of 2012, and all Hot Spot models beginning in 2013 It houses the electronics and circuitry that interface the spa controls with ...read more$459.68 Select Options
-
This IQ 2020 control box is the spa control system for 2006 to 3rd quarter 2012 Hot Spot models and Solana spas beginning in 2006 Please be aware that the control panel that is compatible with this control box unit ("Cedric" system with Invensys circuitry) ...read more
-
This Gecko IN YJ 2 control box replaces the now obsolete 76091 control box used on 2003-2005 Hot Spot SX and TX wired for 115v, Solana RX 2003- 2005 and Hot Spot Spring 2010-2011 and Hot Spot Dash 2010-2012 hot tubs This entire retrofit will need the ...read more
-
This Gecko IN YJ 3 control box used on 2022 Hot Spot Relay and Rhythm This control box is for a 2 pump system wired for 230 volts This entire retrofit will include: Specifications: 2 Pump 230v 60Hz
-
Sku: 77726-BYP
Control Box, 1999-2005 Hot Spot and Solana Retrofit, Gecko IN.YJ 3 Series, 115/230 Volt, 60HZ, After-Market
The Gecko IN YJ 3 control box is part of the retrofit that replaces the discontinued S-Class control system This retrofit is for the following Hot Spot and Solana models: 1 Pump Systems Hot Spot 1999-2000 SE (Y) 1999-2002 RE (Z), RLX (Z/ZQ), SLX ...read more -
Sku: 77726-BUNDLE
Gecko IN.YJ 3 Series Complete System, 1999-2005 Hot Spot and Solana After-Market Retrofit
The Gecko IN YJ 3 Series complete system is the retrofit used on: Hot Spot 1999-2000 SE (Y); 1999-2002 RE (Z), RLX (Z/ZQ), SLX (Y/YQ); 2001-2002 SLXtra (W/WQ); 2003-2005 Sorrento (SOR/SORS), Tobago (TOB), Trinidad (TRI); 2010-2012 Dash (DAS) Solana ...read more -
This is the IQ 2020 spa control system PUG control box retrofit for international spas only (50hz) Hot Spring, Tiger River and Limelight export models Notes from manufacturer: When retrofitting Control Box or Control Panel, must also order appropriate ...read more
-
Sku: 77271-OPENBOX
Control Box, Pug, Retrofit, 60HZ (Open Box)
Replacement for the discontinued IQ 2020 (73223) that was used on all 2001-2009 5 Hot Spring, Tiger River and Limelight spas This control box is also the retrofit upgrade replacement for the discontinued IQ 2000 (71382) that was used on all 1997 Hot Spring ...read moreOpen Box Warning! Read warning -
Factory replacement control box with heater for the now obsolete 71584 control box used on the 1999-2002 Hot Spot RE, RLX, SE, SLX, and 2001-2002 SLXtra and the Solana 2000-2002 X (triangle shaped), 2003-2005 Solana RX, SX, and TX spa models Note ...read more
-
Sku: 72469
Control Box, Hot Spot
Factory replacement control box for the 2003-2005 Hot Spot Mallorca, Sorrento, Trinidad & Tobago, and the 2002-2005 Caldera Oasis I & Oasis II spa models -
Sku: 37335
Control Box, Hot Spot
Factory original control box found on the 1998 Hot Spot RE, RLX, SE, SLX, and SLXtra spa models It comes complete with the circuit board, GFCI, electronic t-stat, high limit thermistor, relays, and heavy-duty power cord -
This jumper is used to bypass the pressure switch on the 2002-forward IQ 2020 spa control system The PDR Titanium Replacement Heater has its own automatic cut-off in the event of a low flow condition thus negating the need for a pressure switch After ...read more
-
This Hot Spot heater electronic pressure switch is a safety device that will shut down the heater if a "low water flow" condition occurs It is used on Hot Spot models (except Sprint & Dash models) and Solana spa models Some symptoms of failure include ...read more
-
This control thermostat was mounted in the control box directly behind the temperature dial on all Hot Spring models from 1989-1993 It was mounted on the under the top-side control panel on all Tiger River models from 1992-1994
-
Sku: 30208
Hi-Limit, Spa, 120 Degree, Hot Spring
This Spa Hi-Limit thermostat (aka spa reset or tub reset) is a safety device designed to prevent damage to the spa that would occur if the spa overheated The probe of this high-limit resides in a "drywell" along with the thermostat probe The spa high-limit ...read more -
This after-market heater pressure switch (looks like a radiator thermostat) is a safety device that screws into the heater that will shut down the heater if a "low water flow" condition occurs It is used on all 1999-2005 Hot Spot spa models as well as all ...read more
-
This Hot Spot heater pressure switch (looks like a radiator thermostat) is a safety device that screws into the heater that will shut down the heater if a "low water flow" condition occurs It is used on all 1999-2005 Hot Spot spa models as well as all ...read more
-
Sku: 36044
Plug, Hole, 0.50
This plug is used to fill openings found on the back of the IQ2000 and IQ2020 Control box that can be used to allow wiring to enter the control box These plugs cover the openings that are not in use to help prevent dust, dirt, and insects from entering the ...read more -
This pressure switch is a safety device that screws into the heater and connects to the control box's main circuit board The main circuit board (motherboard) will shut down the heater if a "low water flow" condition occurs as monitored by this pressure ...read more
-
Sku: 33249
Thermostat, Control, Hot Spot
This Control Thermostat is the replacement for the 1993-1994 Hot Spot Z (round spa) spa model -
Sku: 36043
Control Box Plug, for 0.875 Hole
Black plastic plug used on the IQ 2000 and IQ 2020 Control Boxes to seal off an unused port helping to prevent bugs, dirt and debris from making a home inside the control box -
Sku: 34806
Hi-Limit, Spa, Hot Spot
This Spa High-Limit ( red spa reset or tub reset button) is a safety device designed to shut off all power to the spa should the water temperature reach 120 degrees (plus or minus 4 degrees F) This will prevent damage to the spa or injury to bathers from ...read more -
Sku: 33248
Hi-Limit, Spa, Tiger River and Hot Spot
This Spa Hi-Limit thermostat (red spa reset or tub reset button) is the factory replacement for the 1992-1994 Tiger River Khyber, Manora, and Tondi Also for the 1993-1994 Hot Spot Z model Notes: The Spa Hi-Limit is a safety device designed to shut off ...read more -
Sku: 33232
Pressure Switch, Hot Spot
This replacement pressure switch is for the 1993-1994 Hot Spot Z (round spa) as well as the 1998 Hot Spot RE, RLX, SE, and SLX Notes: When the pressure switch senses proper water flow, the switch remains closed However, if the pressure switch senses a ...read more -
This Heater High-Limit (red heater reset button) is the replacement for the Hot Spring Classic (Model D)
-
Sku: 1316901
Control Box Plug, 1.093 Diameter
Plastic plug used to seal the largest unused round holes in the bottom of the IQ 2020 Control Box on all 2012 5 Hot Spring and Limelight spas These plugs keep critters from crawling into the control box -
Sku: 1412901
Control Box Bracket
Bracket for control box -
This IQ 2020 spa control system is the replacement for the discontinued IQ 2020 control box (73223 Invensys circuitry) that was used on all 2001-2009 5 Hot Spring, Tiger River, and Limelight spas This control box is also the retrofit upgrade replacement for ...read more
-
Sku: 30209
Hi-Limit, Heater, 150 degree, Hot Spring
OBSOLETE: This Heater Hi-Limit (red "heater reset" button) is designed to kill power to the heater if the core temperature exceeds 150 deg The probe of this high-limit is inserted into the end of the heater element and surrounded with plumbers putty to ...read more
Showing 1–30 of 48 results