The team at Backyardplus.com are the best for anything Hot Springs. Super friendly and knowledgeable.On 06/05/2024 by S. O. (verified customer)
Brand: Hot Spring, Hot Spring Pre 89, Wavemaster 6000
Showing 1–30 of 162 results
-
Sku: 31239-NO-VOLUTE-BYPPump, Sta-rite 2hp, Hot Spring (without volute cover and clamp)
Sta-rite two horsepower single speed jet pump (minus the volute cover and stainless steel clamp) is the replacement for the pump used on the 1989-1993 Hot Spring Highlife -
This impeller is used on the export Wavemaster® 9000 and Wavemaster® 9200 50-Hz jet pumps This impeller screws onto the pump motor's threaded shaft with regular right-hand threads Specs: 2 0 HP (3 0 HP @ 60 Hz), 48 frame, XP2 pump -
Sku: 71406Impeller, Wavemaster 9000/9200
This impeller is used on the Wavemaster 9000 (ver 2), 9000 (ver 3) and Wavemaster 9200 jet pumps This impeller screws onto the pump motor's threaded shaft with regular right-hand threads -
Sku: 71405Impeller, Wavemaster 2.0 Hp
Impeller for the Wavemaster 8000 (ver 2), Wavemaster 8000 (ver 3) and the Wavemaster 8200 jet pump This impeller screws onto the pump motor's threaded shaft with regular right-hand threads -
Impeller for the Watkins Wavemaster 7000 jet pump (ver 3) This impeller screws onto the pump motor's threaded shaft with regular right-hand threads This black impeller is the replacement for the Watkins Wavemaster 7000 jet pump jet pump 1 65 HP If your ...read more -
This volute o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump This is the large o-ring gasket that sits between the two halves (suction cover and volute) of the wet end This volute o-ring will work on the following pump model ...read more -
Sku: 36675-01DPDrain Plug, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
This drain plug works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" or your model number 36675-01 This drain plug does NOT come with the o-ring See item 36675-01RNG This drain plug will work on the ...read more -
This drain plug o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" marking located on the discharge or your model number 36675-01 This o-ring fits on the wet end drain plug item 36675-01DP -
Sku: 48WUA-WR3536Wear Ring, Watkins Wavemaster Jet Pump, 48 Frame, Vendor Code 3536
This wear ring works on the 48 frame version of the Watkins Wavemaster jet pumps that have a vendor code of 3536 or have a model number that ends in "-03" Only replace your wear ring if you are replacing your impeller Only replace your wear ring if you are ...read more -
Sku: 56WUA-WR3536
Wear Ring, Watkins Wavemaster Jet Pump, 56 Frame, Vendor Code 3536
This wear ring works on the 56 frame version of the Watkins Wavemaster jet pumps that have a vendor code of 3536 or have a model number that ends in "-03" Only replace your wear ring if you are replacing your impeller Only replace your wear ring if you are ...read more -
This black impeller is the replacement for the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump It is 1 5HP, not the OEM 1 65HP The factory no longer sells Vico replacement parts so the alternative is a new jet pump or wet end This impeller ...read more -
Sku: 71404Impeller, Wavemaster 6000
Replacement impeller for the Watkins Wavemaster 6000 jet pump This impeller screws onto the pump motor's threaded shaft with regular right-hand threads Please verify your pump's model number and vendor code when selecting replacement parts -
Sku: IMP-77710Impeller, Watkins Wavemaster 6000 Jet Pump, 1.5 HP, LX
This impeller is used on the Watkins Wavemaster 6000 jet pumps made by LingXiao (LX) brand It is rated for 1 5 horsepower and fits on a pump with a vendor code of 3536 This impeller screws onto the pump motor's threaded shaft with regular right-hand ...read more -
Sku: IMP-77709Impeller, After-Market, 1 HP, LX
This 1 0HP impeller is the after-market impeller used on the Wavemaster 4000 LX brand jet pumps This impeller screws onto the pump motor's threaded shaft with regular right-hand threads -
Sku: 70273Impeller, Wavemaster 5000 1.5Hp 1-Speed
FMHP Series 1 5 horsepower jet pump impeller This impeller screws onto the pump motor's threaded shaft with regular right-hand threads -
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps Please find your pump model number and if your pump is an OEM ...read more -
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps manufactured by LX (Lingxiao) Please find your pump model number and ...read more -
Sku: 36675-01SSShaft Seal, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This shaft seal will only work with the Vico brand wet end An indicator that your Watkins Wavemaster jet pump was made by Vico is the model number will end in "-01" ...read more -
Sku: 71409Wear Ring, Wavemaster
The jet pump wear ring keeps water from back flowing around the impeller which would reduce the jet pressure significantly It fits inside the "wet end" and slides over the impeller with the ridge side farthest away from the front of the impeller (i e , ...read more -
Sku: 70220Wavemaster Wear Ring
The jet pump wear ring keeps water from back flowing around the impeller which would reduce the jet pressure significantly It fits inside the "wet end" and slides over the impeller with the ridge side farthest away from the front of the impeller (i e , ...read more -
Sku: 71410-BYPVolute O-Ring, Wavemaster
This is the largest O-ring used on the current Wavemaster series of wet ends for Hot Springs, Tiger River, Limelight, Solana and Hot Spot model spas This o-ring fits between the suction cover and the volute of the pump series: XP2/XP2E This o-ring is only ...read more -
Sku: 71554Wavemaster Volute O-Ring
GECKO MODEL O-RING Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver 3), 8200, 9000 (ver 3), 9200 jet pumps Will fit on pump series: XP2/XP2e -
Sku: 30240Volute O-ring, Wavemaster
Large o-ring that fits in between the two halves of the "wet end" (volute & volute cover) of the FMHP Series Wavemaster 3000, Wavemaster 5000 & Wavemaster 8000 jet pumps -
GECKO MODEL SCREW This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps -
Sku: 34447-x2-BYPCompression Fitting O-rings, for 2 inch Union (Qty of 2)
(Quantity of 2 o-rings) O-rings used on the pumps 2" compression fittings ( 71036 ) found on most Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Also used on the replacement "Wet End" pump kits and some heaters The 2" measurement refers ...read more -
O-ring used on the 2" compression fittings (71036) on most Hot Spring, Tiger River, Hot Spot, and Solana spa models The 2" measurement refers to the inner diameter of the most narrow part of the compression fitting/union The o-ring that is included measures ...read more -
Sku: 71036Compression Fitting, 2in with O-Ring
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more -
Sku: 30237-x2-BYPCompression Fitting O-ring, for 1-1/2 inch Union (Qty. of 2)
1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump No Teflon tape is needed for the jet pump ...read more -
1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump No Teflon tape is needed for the jet pump ...read more
-
Sku: 71038Compression Fitting, 1-1/2in with O-Ring
This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more
Showing 1–30 of 162 results