Very helpful. Got items fast(2) would use again and recommend highly! Gary from MaineOn 05/15/2024 by G. D. (verified customer)
Plumbing: Clamp, Shaft Seal, Volute
Showing all 27 results
-
Sku: SK-WM-7000-V3-BYPComplete Seal Kit, Wavemaster 7000 (ver.3)
Wet End Seal Kit for the Wavemaster 7000 (ver 3) Jet Pump These parts only fit the pumps with a vendor number ending in 4081 All the replacement parts necessary when opening up the "wet end" to cure a leaking pump Since the impeller typically breaks when ...read more -
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps Please find your pump model number and if your pump is an OEM ...read more -
Sku: 36675-01SSShaft Seal, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This shaft seal will only work with the Vico brand wet end An indicator that your Watkins Wavemaster jet pump was made by Vico is the model number will end in "-01" ...read more -
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps manufactured by LX (Lingxiao) Please find your pump model number and ...read more -
Sku: 30240Volute O-ring, Wavemaster
Large o-ring that fits in between the two halves of the "wet end" (volute & volute cover) of the FMHP Series Wavemaster 3000, Wavemaster 5000 & Wavemaster 8000 jet pumps -
Sku: 30217Volute, Starite
This Sta-rite volute is the front part of the "wet end" of the 1HP and 2HP Max-E-Glas jet pumps used on the Hot Spring spa models prior to 1993 -
Sku: 70032-BYPSeal Plate Kit, Starite- After Market
This after-market (Sta-rite) seal plate is the part of the "wet end" that bolts onto the pump motor This seal plate is the replacement for both the 1hp and 2hp Starite Max-E-Glas jet pumps used on Hot Spring models prior to 1993 Please note, the pump ...read more -
Sku: 70400-BYPShaft Seal, Wavemaster 7000 (v.1)
This shaft seal is for the Wavemaster 7000 (v 1) Sta-rite 5/8" shaft seal used on the 1HP and 2HP jet pumps that were built from 1998 forward This seal is used with the seal plate that DOES NOT require the copper heater sink If you are repairing a pump ...read more -
Sku: 30224Starite Shaft Seal
Sta-rite shaft seal used on the 1HP and 2HP jet pumps that use a copper heat sink on Hot Spring spas Reference number: U109-93SS -
This is the after-market 3/4" Replacement Shaft Seal for the Wavemaster 7000 version 2 and the Wavemaster 9000 -
Sku: 71030Shaft Seal, Wavemaster 7000 (version 2) and 9000
This item is obsolete and replaced by:
71030-BYPReplacement Shaft Seal for the Wavemaster 7000 version 2 and the Wavemaster 9000 See item 71030-BYP for after-market shaft seal -
Volute for the Wavemaster 7000 version 2 and the Wavemaster 9000 v 1 -
Sku: Ceramic-Disk-BYPCeramic Pump Seal Disk
This ceramic piece is part of most pump seal kits -
Sku: 71448-BYP3/4″ Shaft Seal
3/4" Shaft seal for Wave Master pumps Please call one of our technicians before ordering this part to ensure it is the correct replacement for your jet pump -
Obsolete: The volute and suction cover are no longer available separately and can only be purchased as a part of a wet end kit Please use parts finder serial number search engine to determine the correct wet end for your jet pump GECKO MODEL VOLUTE ...read more -
Sku: 71693Volute, Wavemaster (Gecko Model)
Obsolete: The volute and suction cover are no longer available separately and can only be purchased as a part of a wet end kit Please use parts finder serial number search engine to determine the correct wet end for your jet pump GECKO MODEL VOLUTE This ...read more -
Sku: 70217Volute Cover, Wavemaster
Obsolete: Must purchase the entire wet-end See items: 2 0 HP (Side - Discharge) WE-34505; 1 5 HP (Side-Discharge) OEM 70221; 1 5 HP (Side-Discharge) After-Market WE-72584; 1 0 HP (Center-Discharge) WE-72200; 1 0 HP (Side-Discharge) 33980-WETEND for ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The V Clamp is a large stainless steel band that holds together the two halves (suction cover & seal ...read more -
Sku: 30235Volute, Wavemaster
Obsolete: Must purchase the entire wet-end See items: 2 0 HP (Side - Discharge) WE-34505; 1 5 HP (Side-Discharge) OEM 70221; 1 5 HP (Side-Discharge) After-Market WE-72584; 1 0 HP (Side-Discharge) 33980-WETEND for replacements This volute is one half ...read more -
Sku: 30257Shaft Seal, 5/8in
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com -
Use the 70400-BYP This shaft seal is for the Wavemaster 7000 (v 1) -
Sku: 30254Case, Union Volute
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com -
Sku: 71562
Shaft Ext 92520100
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Shaft Ext 92520100 -
Sku: 71568
Volute, Cface 92770251
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Volute, Cface 92770251 -
Sku: 71723
Volute, Vico Ppbfvfssdcs2/2
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Volute, Vico Ppbfvfssdcs2/2 -
Sku: 71726
Shaft Seal, Vico Ppufsealviton
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Shaft Seal, Vico Ppufsealviton -
Volute for Hotspot Tobago Spa Used on 72200 Jet Pumps, 1 5-inch intake/discharge
Showing all 27 results