Thank you so much for helping me figure out my Vistabhot springs spa issue . The service call on the phone was fast, to the point and just excellent. Not only did Paul know what exact part I needed , he instructed me how to fix it ! and trouble shoot one more issue . This company is a great asset for the home owner that just needs a little extra help. Part delivery was on time and I saved tons of money on a service call . This is my go to place for any hot tub spa repairs ! Highly recommend to anyone and excellent nice service and nice people to talk to.,A+ and my wife’s happy !!On 05/21/2024 by J. S. (verified customer)
Brand: Gecko Alliance, Limelight, Wavemaster 3000, Wavemaster 8200
Showing 1–30 of 61 results
-
This impeller is used on the export Wavemaster® 9000 and Wavemaster® 9200 50-Hz jet pumps This impeller screws onto the pump motor's threaded shaft with regular right-hand threads Specs: 2 0 HP (3 0 HP @ 60 Hz), 48 frame, XP2 pump -
Sku: 71406Impeller, Wavemaster 9000/9200
This impeller is used on the Wavemaster 9000 (ver 2), 9000 (ver 3) and Wavemaster 9200 jet pumps This impeller screws onto the pump motor's threaded shaft with regular right-hand threads -
Sku: 71405Impeller, Wavemaster 2.0 Hp
Impeller for the Wavemaster 8000 (ver 2), Wavemaster 8000 (ver 3) and the Wavemaster 8200 jet pump This impeller screws onto the pump motor's threaded shaft with regular right-hand threads -
Impeller for the Watkins Wavemaster 7000 jet pump (ver 3) This impeller screws onto the pump motor's threaded shaft with regular right-hand threads This black impeller is the replacement for the Watkins Wavemaster 7000 jet pump jet pump 1 65 HP If your ...read more -
This volute o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump This is the large o-ring gasket that sits between the two halves (suction cover and volute) of the wet end This volute o-ring will work on the following pump model ...read more -
Sku: 36675-01DPDrain Plug, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
This drain plug works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" or your model number 36675-01 This drain plug does NOT come with the o-ring See item 36675-01RNG This drain plug will work on the ...read more -
This drain plug o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" marking located on the discharge or your model number 36675-01 This o-ring fits on the wet end drain plug item 36675-01DP -
Sku: 48WUA-WR3536Wear Ring, Watkins Wavemaster Jet Pump, 48 Frame, Vendor Code 3536
This wear ring works on the 48 frame version of the Watkins Wavemaster jet pumps that have a vendor code of 3536 or have a model number that ends in "-03" Only replace your wear ring if you are replacing your impeller Only replace your wear ring if you are ...read more -
Sku: 56WUA-WR3536
Wear Ring, Watkins Wavemaster Jet Pump, 56 Frame, Vendor Code 3536
This wear ring works on the 56 frame version of the Watkins Wavemaster jet pumps that have a vendor code of 3536 or have a model number that ends in "-03" Only replace your wear ring if you are replacing your impeller Only replace your wear ring if you are ...read more -
This black impeller is the replacement for the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump It is 1 5HP, not the OEM 1 65HP The factory no longer sells Vico replacement parts so the alternative is a new jet pump or wet end This impeller ...read more -
Sku: IMP-77710Impeller, Watkins Wavemaster 6000 Jet Pump, 1.5 HP, LX
This impeller is used on the Watkins Wavemaster 6000 jet pumps made by LingXiao (LX) brand It is rated for 1 5 horsepower and fits on a pump with a vendor code of 3536 This impeller screws onto the pump motor's threaded shaft with regular right-hand ...read more -
Sku: IMP-77709Impeller, After-Market, 1 HP, LX
This 1 0HP impeller is the after-market impeller used on the Wavemaster 4000 LX brand jet pumps This impeller screws onto the pump motor's threaded shaft with regular right-hand threads -
Sku: 70457Impeller, Wavemaster 3000
This 1 0 HP Wavemaster 3000 impeller screws onto the electric motor's threaded shaft with regular right-hand threads -
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps Please find your pump model number and if your pump is an OEM ...read more -
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps manufactured by LX (Lingxiao) Please find your pump model number and ...read more -
Sku: 36675-01SSShaft Seal, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This shaft seal will only work with the Vico brand wet end An indicator that your Watkins Wavemaster jet pump was made by Vico is the model number will end in "-01" ...read more -
Sku: 71409Wear Ring, Wavemaster
The jet pump wear ring keeps water from back flowing around the impeller which would reduce the jet pressure significantly It fits inside the "wet end" and slides over the impeller with the ridge side farthest away from the front of the impeller (i e , ...read more -
Sku: 71410-BYPVolute O-Ring, Wavemaster
This is the largest O-ring used on the current Wavemaster series of wet ends for Hot Springs, Tiger River, Limelight, Solana and Hot Spot model spas This o-ring fits between the suction cover and the volute of the pump series: XP2/XP2E This o-ring is only ...read more -
Sku: 71554Wavemaster Volute O-Ring
GECKO MODEL O-RING Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver 3), 8200, 9000 (ver 3), 9200 jet pumps Will fit on pump series: XP2/XP2e -
GECKO MODEL SCREW This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps -
Sku: 34447-x2-BYPCompression Fitting O-rings, for 2 inch Union (Qty of 2)
(Quantity of 2 o-rings) O-rings used on the pumps 2" compression fittings ( 71036 ) found on most Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Also used on the replacement "Wet End" pump kits and some heaters The 2" measurement refers ...read more -
O-ring used on the 2" compression fittings (71036) on most Hot Spring, Tiger River, Hot Spot, and Solana spa models The 2" measurement refers to the inner diameter of the most narrow part of the compression fitting/union The o-ring that is included measures ...read more -
Sku: 71036Compression Fitting, 2in with O-Ring
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more -
Sku: 71038Compression Fitting, 1-1/2in with O-Ring
This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more -
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling 1-1/2" Compression Fitting 2" Compression Fitting -
Hot Spring, Hot Spot & Solana spas only This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple The ...read more -
For Tiger River and Limelight spas only This 1/2" barbed adapter fitting is located on the front of Wavemaster Jet Pumps on Tiger River and Limelight spas Teflon tape should be used on the threads of this fitting for installation -
-
Sku: 301488Sweep Pump Union, 2in Soc. 90 Degree
Two-inch SOC 90deg sweep pump union -
Sku: 1119401Pump Union, 45 Degree
Pump union (aka compression fitting) can be used to connect to any Wavemaster pump later than 1996 This union accepts a 2" PVC pipe and will attach to a 2" standard pump thread The fitting for the pipe is at a 45-degree angle
Showing 1–30 of 61 results