The technical advice over the phone makes Backyard Plus the best source for Hot Springs repair parts. Oscar and Craig are truly experts and are so clear and patient with their troubleshooting and repair advice. Thanks!On 01/16/2024 by J. K. (verified customer)
Brand: Tiger River, Wavemaster 7000, Wavemaster 8200
Showing 121–150 of 153 results
-
This stainless steel screw secures the diffuser to the seal plate on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump -
Bolt that secures the suction flange onto the front of the Wavemaster 7000 (v 1) -
Sku: 35217Power Cord, Silentflo 5002, Tiger River
This Silentflo 5002 power cord is for the 1995-1996 230 volt Tiger River Khyber, Manora (MH model) & Tondi (PH model) models only Although the above-mentioned spa models are connected to 230volts, the Silentflo 5002 is a 120volt pump and has been ...read more -
Sku: 33303Powercord, Circ Pump, Tiger River
This circulation pump power cord is the replacement for all 1992-1994 Tiger River Khyber, Manora & Tondi models -
This Wavemaster® 5000 1 5HP jet pump was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models Also included is the bleedline nipple (item 32267) -
OBSOLETE (Use the 35522-1, Except on '93-'96 Classic) This is the first version of the Wavemaster® 7000 jet pump This was the first 2" suction and discharge pump used on any Hot Spring model The pump hydraulics, as well as the entire jetting, plumbing ...read more -
Sku: 35522-1Pump, Wavemaster 7000 (ver. 2)
This is the second version of the Wavemaster® 7000 jet pump It was used on the 1995-1996 Hot Spring Grandee, Sovereign and the 1995-1996 Hot Spring 220volt only Sovereign (IH) model This pump can be used in place of 36070 -
Sku: 56WUA500-VWavemaster 9000/9200, 8000/8200 Volute O-Ring
LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 56-frame LX wet ends item 77713 and 77712 -
Sku: 48WUA-V
Wavemaster Volute O-Ring
LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 48-frame LX wet ends item 77711, 77710, and 77709 Stamped on wet-end: PP-GF30; B436-14 (03) Reference models (see ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com PART # HAS CHANGED TO 300349 (obsolete) Used on the base of the Wavemaster 8000 (ver 3), 8200, 9000 ...read more -
Obsolete: The volute and suction cover are no longer available separately and can only be purchased as a part of a wet end kit Please use parts finder serial number search engine to determine the correct wet end for your jet pump GECKO MODEL VOLUTE ...read more -
Sku: 71693Volute, Wavemaster (Gecko Model)
Obsolete: The volute and suction cover are no longer available separately and can only be purchased as a part of a wet end kit Please use parts finder serial number search engine to determine the correct wet end for your jet pump GECKO MODEL VOLUTE This ...read more -
Sku: 71029Impeller, Wavemaster 7000 (ver. 2)
1 5 hp pump impeller for the Wavemaster 7000 (version 2) jet pump This impeller screws onto the pump motor's threaded shaft with regular right hand threads -
Sku: 70217Volute Cover, Wavemaster
Obsolete: Must purchase the entire wet-end See items: 2 0 HP (Side - Discharge) WE-34505; 1 5 HP (Side-Discharge) OEM 70221; 1 5 HP (Side-Discharge) After-Market WE-72584; 1 0 HP (Center-Discharge) WE-72200; 1 0 HP (Side-Discharge) 33980-WETEND for ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The V Clamp is a large stainless steel band that holds together the two halves (suction cover & seal ...read more -
Sku: 30235Volute, Wavemaster
Obsolete: Must purchase the entire wet-end See items: 2 0 HP (Side - Discharge) WE-34505; 1 5 HP (Side-Discharge) OEM 70221; 1 5 HP (Side-Discharge) After-Market WE-72584; 1 0 HP (Side-Discharge) 33980-WETEND for replacements This volute is one half ...read more -
Sku: 71027Steel Base, Wavemaster 7000 (ver. 2)
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This black steel base supports the motor of the Wavemaster 7000 v 2 and bolts onto the floor of the Hot ...read more -
Sku: 71414Pump Shroud, Wavemaster
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Replacement manifold (pump shroud) for the Watkins Wavemaster 3000, 5000 (ver 1), 7000 (ver 3) and ...read more -
Obsolete, use the 71410-BYP -
OBSOLETE-Replace with complete pump part 72196 Factory replacement motor for the second version Wavemaster 9000 2 5 hp 1-speed jet pump -
Sku: 71399Motor, Wavemaster 7000 V3, 1.65HP, After Market
This item is obsolete and replaced by:
71400Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice Wavemaster 7000 1 65HP Generic replacement motor for all 1997 forward Wavemaster 7000 jet pumps This ...read more -
Sku: 70404Diffuser Screw, 8-32 X 1in Phillips, Wavemaster 7000 V1
This item is obsolete and replaced by:
70951Obsolete: Factory replacement suggestion item 70951 This is the screw that secures the diffuser to the seal plate on a Wavemaster 7000 (v 1) pump -
Obsolete: factory replacement suggestion item 72194 This 2nd version of the Wavemaster® 8000 jet pump was used on the 1997-1999 Tiger River Siberian -
Sku: 35282Union Riser, Wavemaster 7000, V2
Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice Union riser is located on the suction & discharge of the Wavemaster 7000 version 2 This fitting ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The suction flange bolts onto the suction cover (front) of the Wavemaster 7000 (v 1) jet pump -
Obsolete: Use 74427 This two speed circulation pump was used on 1995-1996 Hot Spring and Tiger River spa models that operate on 220volts The second speed feature insured that the water flowing through the original 5500 Cartridge Style Heater would flow ...read more -
OBSOLETE: Use 72462-BYP Replacement power cord, complete with the end connectors Fits all single speed jet pumps used on all Hot Spring, Tiger River, Hot Spot & Limelight spas from 1997 forward Includes the flag terminal connectors and connector to ...read more -
Sku: 71415Pump Shroud, Wavemaster
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com For Magnetek or AO Smith Century Motors Only Replacement manifold (pump shroud) for the Watkins ...read more -
Sku: 70809Pump Duct Hose, Wavemaster
OBSOLETE-Use the 72344 Black flexible duct hose (looks like dryer vent hose) attaches to the rear of the jet pump shroud to exhaust heat from the pump's motor to outside of the equipment compartment -
Use the 70400-BYP This shaft seal is for the Wavemaster 7000 (v 1)
Showing 121–150 of 153 results