good service and fast deliveryOn 09/05/2023 by M. P. (verified customer)
Showing 181–210 of 219 results
-
Obsolete: The volute and suction cover are no longer available separately and can only be purchased as a part of a wet end kit Please use parts finder serial number search engine to determine the correct wet end for your jet pump GECKO MODEL VOLUTE ...read more
-
Sku: 71693
Volute, Wavemaster (Gecko Model)
Obsolete: The volute and suction cover are no longer available separately and can only be purchased as a part of a wet end kit Please use parts finder serial number search engine to determine the correct wet end for your jet pump GECKO MODEL VOLUTE This ...read more -
Sku: 71029
Impeller, Wavemaster 7000 (ver. 2)
1 5 hp pump impeller for the Wavemaster 7000 (version 2) jet pump This impeller screws onto the pump motor's threaded shaft with regular right hand threads -
Sku: 70217
Volute Cover, Wavemaster
Obsolete: Must purchase the entire wet-end See items: 2 0 HP (Side - Discharge) WE-34505; 1 5 HP (Side-Discharge) OEM 70221; 1 5 HP (Side-Discharge) After-Market WE-72584; 1 0 HP (Center-Discharge) WE-72200; 1 0 HP (Side-Discharge) 33980-WETEND for ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The V Clamp is a large stainless steel band that holds together the two halves (suction cover & seal ...read more
-
Sku: 30235
Volute, Wavemaster
Obsolete: Must purchase the entire wet-end See items: 2 0 HP (Side - Discharge) WE-34505; 1 5 HP (Side-Discharge) OEM 70221; 1 5 HP (Side-Discharge) After-Market WE-72584; 1 0 HP (Side-Discharge) 33980-WETEND for replacements This volute is one half ...read more -
Sku: 71027
Steel Base, Wavemaster 7000 (ver. 2)
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This black steel base supports the motor of the Wavemaster 7000 v 2 and bolts onto the floor of the Hot ...read more -
Sku: 71414
Pump Shroud, Wavemaster
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Replacement manifold (pump shroud) for the Watkins Wavemaster 3000, 5000 (ver 1), 7000 (ver 3) and ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Replacement motor for one of the two Wavemaster 7000 (v 1) found in the 1993 to second quarter 1994 Hot ...read more
-
Obsolete, use the 71410-BYP
-
OBSOLETE-Replace with complete pump part 72196 Factory replacement motor for the second version Wavemaster 9000 2 5 hp 1-speed jet pump
-
Sku: 71399
Motor, Wavemaster 7000 V3, 1.65HP, After Market
This item is obsolete and replaced by:
71400Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice Wavemaster 7000 1 65HP Generic replacement motor for all 1997 forward Wavemaster 7000 jet pumps This ...read more -
Sku: 70404
Diffuser Screw, 8-32 X 1in Phillips, Wavemaster 7000 V1
This item is obsolete and replaced by:
70951Obsolete: Factory replacement suggestion item 70951 This is the screw that secures the diffuser to the seal plate on a Wavemaster 7000 (v 1) pump -
Sku: 35282
Union Riser, Wavemaster 7000, V2
Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice Union riser is located on the suction & discharge of the Wavemaster 7000 version 2 This fitting ...read more -
Obsolete: Factory replacement suggestion item #34677 or 33980-BYP If your tub is wired 110/115v use the 34677 If your tub is wired 220/230v use the 33980-BYP
-
Sku: 30242
Plug, Freeze Pump
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This plug is used to close off the threaded fittings that are built into most jet pump volutes These ...read more -
Sku: 10409
Jet Pump Cordset, Hot Spring
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Power cord used on all jet pumps in all Hot Spring spa models from 1990 through the end of 1996 The plug ...read more -
Sku: 36024
Cord, 18/4 Circ Pump
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This cord is used for the circulation pump on spas made in 1996 with the Vista control system, the ...read more -
Sku: 70174
O-Ring, Drain Plug 1-1/2in
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com O-Ring, Drain Plug 1-1/2" Used in 1990 - 1992 Hot Springs Models Drain Plug screws into the Drain ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The suction flange bolts onto the suction cover (front) of the Wavemaster 7000 (v 1) jet pump
-
OBSOLETE-Use drain fitting 32267 or 32267-1, o-ring is no longer available separately Used on the drain fitting on the front of various Wavemaster jet pumps
-
Sku: 70832
Volute, Silent Flo 5000 & 5002
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The volute connects onto the Silentflo 5000 and Silentflo 5002 using hex screws -
Sku: 70128
Start Capacitor, Starite 2HP
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Start capacitor used on all 2HP Starite Max-E-Glas jet pumps found on pre-1994 Hot Spring spas -
Sku: 30550
Starite Compression Fitting, 1-1/2in
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com 1-1/2" compression coupling assembly (pump union) for all 1-1/2" Starite pump volutes Sta-Rite pumps ...read more -
Obsolete: Use 74427 This two speed circulation pump was used on 1995-1996 Hot Spring and Tiger River spa models that operate on 220volts The second speed feature insured that the water flowing through the original 5500 Cartridge Style Heater would flow ...read more
-
The Watkins SilentFlo® 5000 circulation pump was used from 1995-2008 and was replaced by the new and more efficient E5 Silent Flo
-
OBSOLETE: Use 72462-BYP Replacement power cord, complete with the end connectors Fits all single speed jet pumps used on all Hot Spring, Tiger River, Hot Spot & Limelight spas from 1997 forward Includes the flag terminal connectors and connector to ...read more
-
Sku: 71415
Pump Shroud, Wavemaster
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com For Magnetek or AO Smith Century Motors Only Replacement manifold (pump shroud) for the Watkins ...read more -
Sku: 71032
Impeller, SilentFlo 5002 (45 mm)
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com There is only one replacement impeller for the 2 speed SilentFlo 5002 circulation pump and this is it -
Sku: 70809
Pump Duct Hose, Wavemaster
OBSOLETE-Use the 72344 Black flexible duct hose (looks like dryer vent hose) attaches to the rear of the jet pump shroud to exhaust heat from the pump's motor to outside of the equipment compartment
Showing 181–210 of 219 results