Terrific customer service. Very helpful!!😎✌🏼👍🏼🤛🏻🤙🏼👏🏼On 11/15/2023 by S. G. (verified customer)
Brand: Hot Spring Pre 89, Starite, Wavemaster 4000
Showing 151–180 of 199 results
-
This nut goes onto the volute bolt that secures the seal place to the volute -
Sku: 77820Pump Shroud
Pump shroud for 72991 jet pumps with vendor number 3536 -
This diffuser lock washer is used with the screws and nuts that belong to heater 20286 50-BYP and 20286 75-BYP -
This Wavemaster® 5000 1 5HP jet pump was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models Also included is the bleedline nipple (item 32267) -
This Wavemaster® 3000/5000 is a 115v jet pump is the current replacement for the 1993-2002 Hot Spot Round, Hot Spot RE and 1995-2000 Hot Spot2 and Hot Spot SE spa models Also the replacement for the 1990-1996 Hot Spring Jetsetter and Prodigy and the 3rd ...read more -
Sku: 35522-1Pump, Wavemaster 7000 (ver. 2)
This is the second version of the Wavemaster® 7000 jet pump It was used on the 1995-1996 Hot Spring Grandee, Sovereign and the 1995-1996 Hot Spring 220volt only Sovereign (IH) model This pump can be used in place of 36070 -
Sku: 34462Pump, Wavemaster 9000 (ver.2)
Obsolete: No longer available from Factory This Wavemaster® 9000 jet pump is the replacement for the Wavemaster 9000 ver 1 and ver 2 for Hot Spring 1994-1996 Highlife, 1995-1996 Summit, and Landmark spa models Also included is the bleedline nipple ...read more -
Sku: 56WUA500-VWavemaster 9000/9200, 8000/8200 Volute O-Ring
LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 56-frame LX wet ends item 77713 and 77712 -
Sku: 48WUA-V
Wavemaster Volute O-Ring
LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 48-frame LX wet ends item 77711, 77710, and 77709 Stamped on wet-end: PP-GF30; B436-14 (03) Reference models (see ...read more -
Sku: 70032Seal Plate, Starite
This Sta-rite seal plate is the part of the "wet end" that bolts onto the pump motor This seal plate is the replacement for both the 1hp and 2hp Starite Max-E-Glas jet pumps used on Hot Spring models prior to 1993 Note: Includes a new shaft seal and ...read more -
Sku: 70071Insert, Seal Plate, Starite
Copper insert (heat sink) used on all 1HP and 2HP Starite Max-E-Glas jet pumps on Hot Spring spas Use with 30224 shaft seal -
Replacement Sta-rite impeller for the 2Hp pumps used on the Hot Spring Highlife prior to 1992 -
Obsolete: The volute and suction cover are no longer available separately and can only be purchased as a part of a wet end kit Please use parts finder serial number search engine to determine the correct wet end for your jet pump GECKO MODEL VOLUTE ...read more -
Sku: 71693Volute, Wavemaster (Gecko Model)
Obsolete: The volute and suction cover are no longer available separately and can only be purchased as a part of a wet end kit Please use parts finder serial number search engine to determine the correct wet end for your jet pump GECKO MODEL VOLUTE This ...read more -
Sku: 71029Impeller, Wavemaster 7000 (ver. 2)
1 5 hp pump impeller for the Wavemaster 7000 (version 2) jet pump This impeller screws onto the pump motor's threaded shaft with regular right hand threads -
Sku: 70217Volute Cover, Wavemaster
Obsolete: Must purchase the entire wet-end See items: 2 0 HP (Side - Discharge) WE-34505; 1 5 HP (Side-Discharge) OEM 70221; 1 5 HP (Side-Discharge) After-Market WE-72584; 1 0 HP (Center-Discharge) WE-72200; 1 0 HP (Side-Discharge) 33980-WETEND for ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The V Clamp is a large stainless steel band that holds together the two halves (suction cover & seal ...read more -
Sku: 30235Volute, Wavemaster
Obsolete: Must purchase the entire wet-end See items: 2 0 HP (Side - Discharge) WE-34505; 1 5 HP (Side-Discharge) OEM 70221; 1 5 HP (Side-Discharge) After-Market WE-72584; 1 0 HP (Side-Discharge) 33980-WETEND for replacements This volute is one half ...read more -
Sku: 71027Steel Base, Wavemaster 7000 (ver. 2)
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This black steel base supports the motor of the Wavemaster 7000 v 2 and bolts onto the floor of the Hot ...read more -
Sku: 71414Pump Shroud, Wavemaster
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Replacement manifold (pump shroud) for the Watkins Wavemaster 3000, 5000 (ver 1), 7000 (ver 3) and ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Replacement motor for one of the two Wavemaster 7000 (v 1) found in the 1993 to second quarter 1994 Hot ...read more -
Obsolete, use the 71410-BYP -
OBSOLETE-Replace with complete pump part 72196 Factory replacement motor for the second version Wavemaster 9000 2 5 hp 1-speed jet pump -
Sku: 71399Motor, Wavemaster 7000 V3, 1.65HP, After Market
This item is obsolete and replaced by:
71400Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice Wavemaster 7000 1 65HP Generic replacement motor for all 1997 forward Wavemaster 7000 jet pumps This ...read more -
Sku: 70404Diffuser Screw, 8-32 X 1in Phillips, Wavemaster 7000 V1
This item is obsolete and replaced by:
70951Obsolete: Factory replacement suggestion item 70951 This is the screw that secures the diffuser to the seal plate on a Wavemaster 7000 (v 1) pump -
Sku: 35282Union Riser, Wavemaster 7000, V2
Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice Union riser is located on the suction & discharge of the Wavemaster 7000 version 2 This fitting ...read more -
Obsolete: Factory replacement suggestion item #34677 or 33980-BYP If your tub is wired 110/115v use the 34677 If your tub is wired 220/230v use the 33980-BYP -
Sku: 10409Jet Pump Cordset, Hot Spring
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Power cord used on all jet pumps in all Hot Spring spa models from 1990 through the end of 1996 The plug ...read more -
Sku: 70174
O-Ring, Drain Plug 1-1/2in
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com O-Ring, Drain Plug 1-1/2" Used in 1990 - 1992 Hot Springs Models Drain Plug screws into the Drain ...read more -
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The suction flange bolts onto the suction cover (front) of the Wavemaster 7000 (v 1) jet pump
Showing 151–180 of 199 results