Good company. Honest. ThanksOn 06/03/2024 by D. S. (verified customer)
Get Watkins Wavemaster Pumps, Circulation Pumps, Wet-end Kits, Impellers, Shaft Seals, O-rings, Compression Fittings, and other parts related to your pumps.
Showing 1–30 of 191 results
-
This SilentFlo E5 hot tub circulation pump replaces all previous versions of single-speed and two-speed circulation pumps The new E5 replaces the Watkins SilentFlo® 5000 and all previous circulation pumps on all Hot Spring, Tiger River and Limelight spa ...read more
-
This is the generic version of the new Watkins E5 hot tub circulation pump, to purchase the OEM model please order part number 74427 This after market hot tub circulation pump has the same measurements as the OEM model, and is used to replace all previous ...read more
-
This is the complete circulation pump retrofit kit for Hot Spot SX tubs beginning in 2020 and Hot Spot TX tubs beginning in 2021 What's included: A Frog Bypass Assembly B Circulation Pump to Heater Inlet Assembly B1 2" Heater Inlet Conector with ...read more
-
This Watkins Wavemaster 9000 jet pump is 2 5HP single-speed and is the second version Wavemaster 9000 jet pump found on the Hot Spring, Tiger River, Limelight and Hot Spot brand spas Also included is the bleedline nipple (item 32267)
-
Sku: 72196-BYP
Jet Pump, 2.5HP, 48-Frame, 1-Speed, 230V, 10.0A
This is the 2 5 HP dual speed After-Market version (but wired for single-speed) of the Wavemaster® 9000 jet pump which can be found on the Hot Spring, Tiger River, Limelight, and Hot Spot brand spas NO VENT SHROUD 2 5 HP (Operational horsepower), Dual ...read more -
The Watkins Wavemaster 7000 jet pump is a 1 65 horsepower single-speed jet pump It is pre-wired for 120volt and is the third version of the Watkins Wavemaster 7000 jet pump The original style was used on the Hot Spring brand 1997-1999 Classic, beginning in ...read more
-
Sku: 30215-BYP
Pump, Sta-rite 1hp for Hot Spring
This Starite Max-e-glass one horsepower single speed jet pump was used on the 1980-1993 Hot Spring Classic, 1987-1993 Hot Spring Grandee, 1985-1989 Hot Spring Indoor-Outdoor and the 1990-1993 Hot Spring Sovereign spa models -
Sku: 31239-BYP
Pump, Sta-rite 2hp for Hot Spring
This two horsepower single speed pump assembly was used on the Hot Spring Highlife model from 1989-1993 -
Sku: 31239-NO-VOLUTE-BYP
Pump, Sta-rite 2hp, Hot Spring (without volute cover and clamp)
Sta-rite two horsepower single speed jet pump (minus the volute cover and stainless steel clamp) is the replacement for the pump used on the 1989-1993 Hot Spring Highlife -
Sku: 36070-BYP
Pump, Wavemaster 7000 (ver. 1), 1HP
The 36070 was the first version of the Wavemaster® 7000 jet pump This was the first 2" suction and discharge pump used on any Hot Spring model It is wired for 115v and 1 HP with 2" suction Reference no : 33145; 36070 -
This is the complete "wet end" of the jet pump Your Watkins Wavemaster 9000 & 9200 (v 2), 2 5 HP jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire "wet end kit" is needed Perfect remedy if ...read more
-
This is the AFTER-MARKET "wet end" of the jet pump Your Wavemaster 9000 & 9200 (v 2), 2 5 HP jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire "wet end kit" is needed Perfect remedy if your ...read more
-
This is the after-market wet end for the European Wavemaster 2 0 hp (3HP @ 60hz North American) 48 frame jet pump, model number 0965901
-
This is the complete "Wet End" of the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump This wet end is 1 5 horsepower and the factory original jet pump is 1 65 horsepower The factory no longer sells Vico replacement parts so the alternative is ...read more
-
This is the complete "Wet End" of the Wavemaster 7000 1 65hp, 48 Frame jet pump The jet pump is comprised of two main components: the electric motor and the "Wet End" Please verify your pump's model number and vendor code when selecting replacement parts
-
This is the complete "Wet End" of the Wavemaster 7000 1 65hp, 48 Frame jet pump The jet pump is comprised of two main components: the electric motor and the "Wet End" Please verify your pump's model number and vendor code when selecting replacement parts
-
Sku: 72993
Wet End Kit, Wavemaster 5000 1.5HP
This is the complete "wet end" is for the Wavemaster® 5000 1 5HP pump that was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models Also included is the bleedline nipple (item 32267) Please ...read more -
Sku: 72993-BYP
Wet End Kit, After-Market, Wavemaster 5000 1.5HP
This is the after-market "wet end" is for the Wavemaster® 5000 1 5HP pump that was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models Please verify your pump's model number and vendor code when ...read more -
This is the AFTER-MARKET "wet end" for the 1 0HP pump The intake and discharge measure 2" This "wet end" will attach to your existing motor Your jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire ...read more
-
This is the AFTER-MARKET "wet end" of the jet pump Your Wavemaster 8000, 2 0 HP jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire "wet end kit" is needed Perfect remedy if your "wet end" has ...read more
-
This is the AFTER-MARKET "wet end" for the 1 0HP FMCP pump The intake and discharge measure 1-1/2" This "wet end" will attach to your existing motor Your jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, ...read more
-
This is the AFTER-MARKET "wet end" for the 1 5HP FMHP pump The intake and discharge measure 1-1/2" This "wet end" will attach to your existing motor Your jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, ...read more
-
Sku: 70331
Wet End Kit,0.75 hp, 48fr, Side Discharge, 1-1/2″ intake/discharge, Gecko Aquaflo FMHP series
This is the "wet end" for the 0 75 HP FMHP series pump (side discharge) The intake and discharge measure 1-1/2" This "wet end" will attach to your existing motor Your jet pump is comprised of two main components: the electric motor and the "wet end" In ...read more -
Sku: 36070-WETEND
Wetend Kit, Watkins Wavemaster 7000 Jet Pump (v.1)
Wet end kit for the Watkins Wavemaster 7000 jet pump (v 1) 36070 pump The 36070 pump (36070-BYP) was used on the Hot Spring 1993-1996 Classic, 1993-1995 Grandee and Sovereign spa models This kit comes pre-assembled for shipping purposes It needs to be ...read more -
This impeller is used on the export Wavemaster® 9000 and Wavemaster® 9200 50-Hz jet pumps This impeller screws onto the pump motor's threaded shaft with regular right-hand threads Specs: 2 0 HP (3 0 HP @ 60 Hz), 48 frame, XP2 pump
-
Impeller for the Watkins Wavemaster 7000 jet pump (ver 3) This impeller screws onto the pump motor's threaded shaft with regular right-hand threads This black impeller is the replacement for the Watkins Wavemaster 7000 jet pump jet pump 1 65 HP If your ...read more
-
This black impeller is the replacement for the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump It is 1 5HP, not the OEM 1 65HP The factory no longer sells Vico replacement parts so the alternative is a new jet pump or wet end This impeller ...read more
-
Sku: 48WUA-WR3536
Wear Ring, Watkins Wavemaster Jet Pump, 48 Frame, Vendor Code 3536
This wear ring works on the 48 frame version of the Watkins Wavemaster jet pumps that have a vendor code of 3536 or have a model number that ends in "-03" Only replace your wear ring if you are replacing your impeller Only replace your wear ring if you are ...read more -
Sku: 56WUA-WR3536
Wear Ring, Watkins Wavemaster Jet Pump, 56 Frame, Vendor Code 3536
This wear ring works on the 56 frame version of the Watkins Wavemaster jet pumps that have a vendor code of 3536 or have a model number that ends in "-03" Only replace your wear ring if you are replacing your impeller Only replace your wear ring if you are ...read more -
This volute o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump This is the large o-ring gasket that sits between the two halves (suction cover and volute) of the wet end This volute o-ring will work on the following pump model ...read more
Showing 1–30 of 191 results