It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
Get Watkins Wavemaster Pumps, Circulation Pumps, Wet-end Kits, Impellers, Shaft Seals, O-rings, Compression Fittings, and other parts related to your pumps.
Showing 1–30 of 58 results
-
This is the complete "wet end" of the jet pump Your Watkins Wavemaster 9000 & 9200 (v 2), 2 5 HP jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire "wet end kit" is needed Perfect remedy if ...read more
-
This is the complete "wet end" of the jet pump Your Wavemaster 9000 & 9200 (v 2), 2 5 HP jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire "wet end kit" is needed Perfect remedy if your "wet ...read more
-
This is the AFTER-MARKET "wet end" of the jet pump Your Wavemaster 9000 & 9200 (v 2), 2 5 HP jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire "wet end kit" is needed Perfect remedy if your ...read more
-
This is the complete"wet end" for the Wavemaster 8000 2 0 HP jet pump and Wavemaster 8200 2 0HP two-speed jet pump Your jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire "wet end kit" is needed ...read more
-
This is the entire "wet end" for the Wavemaster 8000 2 0 hp jet pump and Wavemaster 8200 2 0hp two-speed jet pump that can be found on Hot Spring and Limelight spas beginning in 2007
-
Sku: 72995-BYP
Wet End Kit, After Market, 2.0 hp Pump
This is the after-market wet end for the Wavemaster 8000 2 0 hp jet pump and Wavemaster 8200 2 0HP, 2-speed, 48 Frame jet pump -
This is the after-market wet end for the European Wavemaster 2 0 hp (3HP @ 60hz North American) 48 frame jet pump, model number 0965901
-
This is the AFTER-MARKET "wet end" for the 1 0HP pump The intake and discharge measure 2" This "wet end" will attach to your existing motor Your jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire ...read more
-
This is the AFTER-MARKET "wet end" of the jet pump Your Wavemaster 8000, 2 0 HP jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, this entire "wet end kit" is needed Perfect remedy if your "wet end" has ...read more
-
This is the AFTER-MARKET "wet end" for the 1 0HP FMCP pump The intake and discharge measure 1-1/2" This "wet end" will attach to your existing motor Your jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, ...read more
-
This is the AFTER-MARKET "wet end" for the 1 5HP FMHP pump The intake and discharge measure 1-1/2" This "wet end" will attach to your existing motor Your jet pump is comprised of two main components: the electric motor and the "wet end" In some cases, ...read more
-
Sku: 70331
Wet End Kit,0.75 hp, 48fr, Side Discharge, 1-1/2″ intake/discharge, Gecko Aquaflo FMHP series
This is the "wet end" for the 0 75 HP FMHP series pump (side discharge) The intake and discharge measure 1-1/2" This "wet end" will attach to your existing motor Your jet pump is comprised of two main components: the electric motor and the "wet end" In ...read more -
Sku: 33980-WETEND
Wet End, Wavemaster 5000 Replacement
This replaces the wet end on the obsolete Wavemaster® 5000 pump found on the pre-1997 Hot Spring and Tiger River spa models It is the complete wet end, FMHP series, 1 0HP (Orange Dot), 1-1/2" Intake / Side Discharge, 48 Frame -
Sku: 36070-WETEND
Wetend Kit, Watkins Wavemaster 7000 Jet Pump (v.1)
Wet end kit for the Watkins Wavemaster 7000 jet pump (v 1) 36070 pump The 36070 pump (36070-BYP) was used on the Hot Spring 1993-1996 Classic, 1993-1995 Grandee and Sovereign spa models This kit comes pre-assembled for shipping purposes It needs to be ...read more -
This volute o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump This is the large o-ring gasket that sits between the two halves (suction cover and volute) of the wet end This volute o-ring will work on the following pump model ...read more
-
Sku: 36675-01DP
Drain Plug, Watkins Wavemaster 7000 Jet Pump, Vico Ultimax
This drain plug works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" or your model number 36675-01 This drain plug does NOT come with the o-ring See item 36675-01RNG This drain plug will work on the ...read more -
This drain plug o-ring works on the Vico Ultimax version of the Watkins Wavemaster 7000 jet pump Check your wet end for the "V" marking located on the discharge or your model number 36675-01 This o-ring fits on the wet end drain plug item 36675-01DP
-
Sku: SK-WM-7000-V3-BYP
Complete Seal Kit, Wavemaster 7000 (ver.3)
Wet End Seal Kit for the Wavemaster 7000 (ver 3) Jet Pump These parts only fit the pumps with a vendor number ending in 4081 All the replacement parts necessary when opening up the "wet end" to cure a leaking pump Since the impeller typically breaks when ...read more -
Sku: 71410-BYP
Volute O-Ring, Wavemaster
This is the largest O-ring used on the current Wavemaster series of wet ends for Hot Springs, Tiger River, Limelight, Solana and Hot Spot model spas This o-ring fits between the suction cover and the volute of the pump series: XP2/XP2E This o-ring is only ...read more -
Sku: 71554
Wavemaster Volute O-Ring
GECKO MODEL O-RING Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver 3), 8200, 9000 (ver 3), 9200 jet pumps Will fit on pump series: XP2/XP2e -
Sku: 72137
Volute O-ring, Tobago Jet Pump
Replacement volute o-ring for the 1 5hp Tobago FMCP (center discharge) jet pump used from 2003-2007 -
Sku: 34447-x2-BYP
Compression Fitting O-rings, for 2 inch Union (Qty of 2)
(Quantity of 2 o-rings) O-rings used on the pumps 2" compression fittings ( 71036 ) found on most Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Also used on the replacement "Wet End" pump kits and some heaters The 2" measurement refers ...read more -
O-ring used on the 2" compression fittings (71036) on most Hot Spring, Tiger River, Hot Spot, and Solana spa models The 2" measurement refers to the inner diameter of the most narrow part of the compression fitting/union The o-ring that is included measures ...read more
-
Sku: 71036
Compression Fitting, 2in with O-Ring
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more -
Sku: 71038
Compression Fitting, 1-1/2in with O-Ring
This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more -
This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling 1-1/2" Compression Fitting 2" Compression Fitting
-
Sku: ML-1OZ-BYP
Silicone Grease, 1 oz. Tube
Silicone grease ideal for lubricating o-rings -
This is the largest o ring on the Wavemaster 7000 (v 1) jet pump It fits between the cover and the seal plate
-
Sku: 30222
Sta Rite Diffuser O-Ring
Diffuser o-ring for the 1hp & 2hp Sta-rite jet pumps used in Hot Spring models prior to 1993
Showing 1–30 of 58 results